APW Wyott DWC13 User Manual

R

INSTALLATION AND OPERATING INSTRUCTIONS

Model:

DWC13

EXPORT WARMER CABINET

INTENDED FOR OTHER THAN HOUSEHOLD USE

RETAIN THIS MANUAL FOR FUTURE REFERENCE

UNIT MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES

WARNING:

cause property damage, injury or death. Read the Installation, Operating and
Maintenance Instructions thoroughly before installing or servicingthis equipment.

This equipment has been engineered to provide you with year-round dependable service when used
according totheinstructions in this manual and standard commercialkitchen practices.

Phone: +1
Fax: [phone]
Toll Free: [phone]
Website: www.apwwyott.com
E-mail: [e-mail]

[phone]

Improper installation, adjustment, alteration, service or maintenance can

!!

P/N 66974 9/05

APW WYOTT

729 Third Avenue

Dallas, TX 75226

1

INSTALLATION INSTRUCTIONS

1. UNPACK. There should beon cabinetand two shelves.

2. Checkfor loose or damaged parts.

3. Plugthe unit intoa 230Voutlet.

4. Checkto see thatthe lightturns on and that theunit heatsup.

OPERATING INSTRUCTIONS

1. Turnon unit.

2. Setdial between "1 & 2 (see "KNOBSETTING" diagram).

3. Letwarm up for1 hour.

4. Forless heat, turndown (CCW).
To increase heat, turn up (CW).

5. Whendone, turn off unit.

1

3

2

4

5

DAILY CLEANING INSTRUCTIONS

1. Turnunit off and unplug the unitfrom thepower outlet.

2. Doorsmay be removedfor cleaning.

3. Clean the cabinet with soapy water and a soft cloth. Do not use chemicals such as ammonia,
alcohol, or chlorine to clean the cabinet. The door and sides are made of plastic, and these
chemicals will cause cracking. The plastic sides are easily scratched, so be sure to use something
softto washthem.

4.

5. The shelves are stainless steel, and maybe machinewashed.

DO NOT IMMERSE CABINET IN WATER. DO NOT JET SPRAY CABINET. DO NOT PUT
CABINETIN A DISHWASHER.

SPECIFICATIONS

POWER: 230V, 550W, 50/60HZ
OVERALLDIMENSIONS: 12W' Wide x12 Deepx 20 ~"High
INSIDEDIMENSIONS: 12"Wide x 12W' Deep x 115/8"High
CORDSET: 5 FT, 3 GROUNDEDWIRE CORD

NOTE:

IT MUST BE REPLACED BY THE MANUFACTURE OR ITS SERVICE AGENT OR A SIMILARLY
QUALIFIEDIN ORDERTOAVOIDAHAZARD.

SHIPPINGWEIGHT: 25Ibs.
APPROVALS: ULEPH (NSF 4), CE

FORAPPLIANCES WITH TYPE Y ATTACHMENT: IF THE SUPPLYCORD IS DAMAGED,

3/t"

REPLACEMENT PARTS LIST

ITEM PART NUMBER DESCRIPTION

1 Stainless Steel Shelf
2 Adjustment Knob (0-5)
3 70801001 Lamp 230v 40W Philips P45 E14 European
4 Door Knob
4a Screw for Door Knob (Need 11/ea)
5 Door
6 Striker Plate (for Door Magnet)
7 Door Hinge
7a Screw for Door Hinge (Need 2/ea)
7b Screw for Frame Hinge (Need 2/ea)
8 Shelf Rod
8a Shelf Rod Screws
9 Door Magnet
9a Screw for Door Magnet (Need 2/ea)

66922
89499

89165
89029
66931
66923
66937
88984
88856
66933
88993
66936
88854

2