APW Wyott CWM-2SP, CWM-2V, CWM-2A User Manual

PRODUCT: QUANTITY: ITEM #:

Models:  CWM-2A  CWM-2V  CWM-2SP

Designed Smar t

Built Solid

Cooker / Warmer

Merchandising Systems

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com · [e-mail]

Rev. 5/22/2005

Model: CWM-2A Cooker Warmer Merchanding System

Built to Last

• Heavy-duty stainless steel construction for long life.

• Steel “element support” stabilizes heating elements and
reflects heat toward food.

Reliability backed by APW Wyott’s Warranty

• All APW Wyott warmers are backed by a 1 year enhanced
warranty service, which replaces new units with certain
product issues through the convenience of direct overnight
shipments from the factory.

• Certified by the following agencies:

See reverse side for product specifications.

Merchandising Systems!

• Smooth stainless steel front, sides, and back allow decal
signs to be applied for merchandising.

• Designed to cook and hold pre-cooked foods from frozen state.

• Perfect for soups, brats, chilis, and other dishes that need a
quick thaw during the cooking cycles and a gentle warming
heat for serving.

• CWM model has unique “serpentine shaped” heating
elements that evenly distribute heat throughout the unit.

• Provided with insulation to protect interior parts and
countertops from heat build-up.

*inserts and lids

not included on
CWM-2A

Model: CWM-2SP

APW Wyott Design Features

• All CWMversions are made with attractive stainless steel
panels that have smooth surfaces.

• Designed for wet usage 100°F to 212°F (38°C to 100°C)

• BiMet thermostatic control

• Pilot light

• Side handles

CWM-2A

CWM-2V

• Drain and side drain spicket • No Drain

CWM-2SP

• Drain and side drain spicket

• Two 7 quart insets

• Two hinged lids with clips

• Two 8 oz. ladles

• Adaptor plate with two holes for 7 quart insets

Cooker / Warmer

Merchandising Systems

PRODUCT: QUANTITY: ITEM #:

Models:  CWM-2A  CWM-2V  CWM-2SP

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [e-mail]

Rev. 5/22/2005

#1507

Cooker Warmer Countertop Systems (CWM) are constructed of stainless steel material around the exterior base and
deep drawn stainless steel for the food well. Side handles are provided. Unit will be heated with a 1500 sepentine
shaped heating element. Heat control shall be a Bi-Met thermostatic control. Each unit should have a 6 ft. long power
cord and one inch rubber legs. Units with drains include a side drain spicket for easy removal of water in well. Units are
UL listed, UL Sanitation, and ULC listed.

PRODUCT SPECIFICATIONS

Construction:

Stainless steel exterior and interior, chrome plated side
handles, 1” bottom insulation, 1” rubber legs. Drain versions
have chrome plated drain spicket.

Electrical Information:

Each unit is equipped with a 60”, three wire grounded
power cord which terminates with a standard three pronged
male plug. The 120V unit uses a NEMA5-15P plug.

Electrical Specifications:

CWM (all) 120V, 1500W, 12.5 Amps

Capacity:

CWM 2A/2V 22 qt. (holds one 12x20 pan or

three 1/3 size pans.

CWM 2SP Holds two 7 qt. insets

Overall Dimensions:

CWM (all) 11.26”H x 14.5”W x 22.5”D

(28.6cm x 36.83cm x 57.15cm)

Shipping:

CWM-2A 29 lbs. (13.15 kg)
CWM-2V 29 lbs. (13.15 kg)
CWM-2SP 34 lbs. (15.42 kg)

FOB: Dallas, TX 75226

Consultant Specifications

*APW Wyott reserves the right to modify specifications

or discontinue models without incurring obligation.

24.959

22.500

11.262

3.916

11.805

14.500