Lowerator® Mobile
Cup and Saucer Dispenser
PRODUCT: QUANTITY: ITEM #:
Designed Smart
• Mobile, Cantilever-Type, Self-Leveling Dispenser that is easily
field adjustable for dispensing racks of cups with Adjustube®
dispensers for dispensing saucers.
• CTRS Mobile Cup and Saucer Dispensers are excellent for
use in serving lines, tray makeup lines, or at hot beverage
service points. They are open on three sides for easy access.
• Lift-out panel for easy access to dispensing mechanism
• Full base for sanitary protection and empty rack storage
• Tray carrier will not tip or bind
• Convenient push handle
Built Solid
Models: CTRS-2020-5 CTRS-2020-6 CTRS-2020-6.5
Mobile Cup and Saucer Lowerator®
Options
Bult for Long Life!
• Stainless steel construction with standard protective corner
bumper.
• Open sided construction for versatility
• Dependable and adjustable extension spring dispensing
mechanism
• Four-inch polyurethane casters. Rear casters have brakes.
Reliability backed by APW Wyott’s Warranty
• APW Wyott lowerators are backed by a 1-year parts
and labor warranty, and a 1-year on-site labor warranty.
• Certified by the following agencies:
• 5-inch polyurethane casters, two with brakes (installation
not included) (add -5P to model number)
• Perimeter bumpers (add -PB to model number)
See reverse side for product specifications.
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com · info@apwwyott.com
Rev. 5/22/2005
Lowerator® Mobile
Cup and Saucer Dispenser
PRODUCT: QUANTITY: ITEM #:
32.63”
23.31”
20.5
36”
20.5
Models: CTRS-2020-5 CTRS-2020-6 CTRS-2020-6.5
PRODUCT SPECIFICATIONS
Dispensing System:
1. Cup rack dispenser: Easily field adjustable to a wide
load range. By connecting the self-contained extension
springs, the load rate can be increased in increments of
one pound per inch. Stainless steel carrier cannot bind or
tip.
2. Saucer dispenser: All models have Adjustubes® with
25 1/2” vertical storage. Tubes have field adjustable
spring rate (no tools needed). By connecting the self-contained extension springs, the load rate can be increased
in increments of 2.5 oz./in. or 4 oz./in. Each tube also
has a storage bank for springs when not in use.
Construction:
All stainless steel exterior and base, saucer lowerator
tube made of mirror polioshed stainless steel, coated
stainless steel springs, 4” polyurethane casters, rubber
protective bumpers.
World Class Support
World Class Sales Support to assist you with finding the right
solution to your operation’s needs. Call Customer Service at
(800) 527-2100 or fax your request to (214) 565-0976.
For more information about APW Wyott’s World Class Support
and High Performance Equipment, look us up on the Internet
at www.APWwyott.com
Capacity:
To 125 trays, 14 dozen glasses, 12 dozen saucers.
Vertical storage 27 1/8” (23” travel and 4 1/8” to top
of upright).
Shipping:
FOB: Cheyenne, WY
Most Extensive Service System in the Industry! APW Wyott has two
levels of service support for your needs:
• Direct Service Hot Line to Service Department, call
(800) 527-2100.
• To find the Registered Service Technician in your area, call
Automated Service Hot Line at (800) 733-2203.
*APW Wyott reserves the right to modify specifications or discontinue models without incurring obligation.
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com· info@apwwyott.com
Rev. 5/22/2005
# 1302