APW Wyott BM-80D, BM-80-UL, BM-80D-UL General Manual

I nsula t e d H ot Food We lls

Models:  BM-80  BM-80D  BM-80-UL  BM-80D-UL (“D” designates drain)

PRODUCT: QUANTITY: ITEM #:

Designe d Sm ar t

Gr ea t est Se le c t ion of Hot Food We lls!

• Heavy-duty bottom mount, insulated rectangular drop-in
hot food well is designed for installation in metal
countertop.

• Available with Round Corners or Square Corner (add
a "C" to model number) designs.

• Units available in a UL recognized component
construction with open wires and increase-decrease
plate or complete UL listed construction including
electrical conduit, bezel and control box.

• Available in a variety of wattage power to accommodate
your needs, whether it is for High Performance, Fast
Recovery power or Energy Efficient, Lower wattage
(750 watts) power.

• Available with Welded Drain Design or no drain.

Most Effe c t ive H ea t Syst e m!

• All Bottom Mounted Food Wells are heated by tubular
calrod heat element shaped in serpentine fashion for
even heat distribution to pan base.

• Element is mounted under well and secured by an
aluminized reflector shield for maximum efficiency.

• Thermostatically controlled for fast heat recovery.

APW Wyot t Design Fe a t ure s

• 20 ga. deep-drawn stainless steel well pans.

• Available with or without drain.

• Unit may be used wet or dry (wet use offers best
results).

• Easy access to heating elements.

• Thermostatic control with 36” capillary (effective
length 26”).

Bot t om M ount Se rie s

Insulated Bottom Mount Hot Food Well BM-80

Built Solid

• Constructed of deep-drawn 20 ga. type 304 stainless steel.

• Units with drain are provided with stainless steel ½ NPT
drain welded to bottom of pan and provided with
removable screen.

• Entire heat assembly covered with inspection housing
with layer of 1 1/2" thick compressed fiberglass insulation.

Re liabilit y ba c k ed by APW Wyot t ’s Wa rra nt y

• All APW Wyott food wells are backed by a 1-year parts
and labor warranty, including on-site service calls within
50 miles of authorized service technicians.

• Certified by the following agencies:

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [e-mail]

• Large indicating pilot light.

• Multiple units can be installed in same table or
counter.

• Multiple wattages and voltage choices

Options

• Thermostat with 72” capillary (effective length 62”)

• Recessed bezel (56360)

• Drain kit (56420)

• Lever operated shut off valve (56360)

• Infinite Controls

• Square corners - BM-80C

See reverse side for product specifications.

Rev. 5/22/2005

I nsula t e d H ot Food We lls

Models:  BM-80  BM-80D  BM-80-UL  BM-80D-UL (“D” designates drain)

PRODUCT: QUANTITY: ITEM #:

PRODUCT SPECIFI CAT I ONS

Const ruc t ion:

Well is constructed of deep-drawn 20 ga. type
304 stainless steel, with 28 ga., fully insulated
aluminized steel outer housing. Units shipped
with drain are provided with stainless steel 1/2"
NPT drain welded to bottom of pan provided with
removable screen. Unit is heated by a tubular
calrod heat element shaped in serpentine
fashion for even heat distribution to pan base.
Element is mounted under well and secured by
aluminized reflector shield for maximum
efficiency. Top edge of unit has a 13/16" flange.
Recommended flange turndown 3/4". BM-80
Round Corner versions are made with a 1"
radiused. Thermostatic control has 36" capillary
(effective length 26")

Bot t om M ount Se rie s

Ele c t ric a l Spec ifica t ions:

120V, 750W, 6.25 Amps
120V, 1200W, 10 Amps
208V, 1600W, 7.7 Amps
208/240V, 1200/1600W, 5.8/6.7 Amps
208/240/277V, 900/1200/1600W, 4.3/5.0/5.8 Amps

Ove ra ll Dim ensions:

Outside: 8 5/16”H x 13 13/16”W x 21 3/4”L

(21.1cm x 35.1cm x 55.2cm)

Inside: 6 1/4”H x 12 3/16”W x 20 1/8”L

(15.9cm x 30.9cm x 51.1cm)

Cutout: 11 7/8”W x 19 7/8”L

(30.2cm x 50.5cm)

UL Models: Control size: 5 15/16”W x 6 7/16”H

Control cutout: 5 3/4”W x 6 1/4”H
If UL kit added, 6” clearance
necessary for thermostat box.

Shipping I nfor m at ion:

Weight: 20 lbs. (9.1kg), UL models: 24 lbs. (10.9kg)
Freight Class: 92 1/2
FOB: Dallas, TX 75226

*APW Wyott reserves the right to modify specifications or discontinue models without incurring obligation.

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [e-mail]

Rev. 5/22/2005

# 1401