APW Wyott BM-30-UL General Manual
Hot Food Well
Bottom Mount
PRODUCT: QUANTITY: ITEM#:
Designed Smart.
Model:
BM-30 (without drain) BM-30-UL (without drain)
BM-30D (with drain) BM-30D-UL (with drain)
(Specify voltage below):
120V-750W 208/240V-1200/1600W
120V-1200W 208/240/277V-900/1200/1600W
120V-1600W
Bid Specifications
• Heavy-duty bottom mount, Uninsulated Rectangular
Drop-in Hot Food Well is designed for installation in
metal countertop. Hot Food Well accommodates standard
size steamtable pans.
Well is constructed of deep-drawn, 20 ga., Type 304,
stainless steel. Units shipped with drain are provided
with stainless steel 1/2 NPT drain welded to bottom of
pan and provided with removable screen. Unit is heated
by tubular calrod heat element shaped in serpentine
fashion for even heat distribution to pan base. Element
mounted under well and secured by aluminized deflector
shield for maximum efficiency. Entire heat assembly covered with inspection housing with layer of 1
compressed fiberglass insulation fixed to bottom of pan
with threaded studs for easy service.
The units are available in a UL Recognized component
construction with open wires and increase-decrease
plate or complete UL Listed construction including
electrical conduit, bezel and control box.
1
⁄2" thick
Built Solid.
Reliability backed by APW Wyott’s Warranty
• All APW Wyott Food Wells are backed by a 1-year Parts
and Labor warranty, including On-Site
Service calls within 50 miles of
authorized service technicians.
• Certified by the following agencies:
APW Wyott Design Features
• 20 ga., deep-drawn stainless steel well pans.
• Available with or without drain.
• Unit may be used WET or DRY (wet use offers
best results).
• Easy access to heating elements.
• Thermostatic control with 36" capillary
(effective length 26").
• Large indicating pilot light.
• Multiple units can be installed in same table or counter.
Options
• Thermostat with 72" capillary (effective length 62").
• Recessed Bezel (56370)
• Drain Kit (56420)
• Lever Operated Shut Off Valve (56360)
• Infinite Controls
MODEL BM-30 HOT FOOD WELL
(D-UL shown)
Rev. 1/1/2003
Hot Food Well
Bottom Mount
See Front for Models*
PRODUCT: QUANTITY: ITEM#:
PRODUCT SPECIFICATIONS
13/16” flange
Recommended flange turndown 3/4”
4 round corners; 1” radiused
Thermostatic control has 36” capillary
(effective length 26”)
UL Models: bezel size 6-1/4”W x 6-7/8” H
Bezel cutout 5-3/4”W x 6-1/4” H
UL models control use increase/decrease plate hole
pattern
Electrical Specifications:
120V, 750W, 6.25 Amps
120V, 1200W, 10 Amps
208V, 1600W, 7.7 Amps
208/240V, 1200/1600W, 5.8/6.7 Amps
208/240/277V, 900/1200/1600W, 4.3/5.0/5.8 Amps
Model BM-30 Hot Food Well
World Class Support
World Class Sales Support to assist you with finding the right solution to your operation’s needs. Call Customer Service at
(800) 527- 2100 or Fax your request to 1-(214) 565-0976.
For more information about APW Wyott’s World Class Support and
High Performance Equipment, look us up on the Internet at
www.APWwyott.com
Overall Dimensions:
Outside
8-1/2" H x 13-3/16" W x 21-3/4" D
(15.9 cm x 35.1 cm x 55.2 cm)
Inside
6-1/4" H x 12-3/16" W x 20-1/8" D
(21.6 cm x 31.1 cm x 51.1 cm)
Cutout
11-7/8” W x 19-7/8” D
(30.2 cm x 50.5 cm)
Shipping Weight:
23 lbs. (10.4 kg)
F.O.B. Dallas, TX
Letters after model number indicates:
• No letter=1” radiused corners, UL recognized
• D–Units with drain
• UL–UL listed units
APW Wyott reserves the right to modify specifications or discontinue models without incurring obligation.
Rev. 1/1/2003 #1408
Loading...