A P Products Contact Pins User Manual
A P Products GmbH
Series 0,635
Straight Contact Pins
• 8 mm to 80 mm length
• Loose pins or bandoliered
• Choice of platings available
• Choice of base materials available
• Optional Retention Feature
• Custom versions available
Physical
Contact Metal
Standard Material: CuNi18Zn20 to DIN 17663 (FB18) (Nickel Silver)
Other base materials options available
Strap / Bandoleer Metal
Standard Material: Brass
Plating Options
0,25µm Gold (all over)
Underplating: 1,27µm (50µ") Ni
Interface Area: 0,25µm (10µ") AuCo 0,2 minimum
Solder Tails: 0,25µm (10µ") AuCo 0,2 minimum
0,76µm Gold (Selective)
(Bandoleered pins only)
Underplating: 1,27µm (50µ") Ni
Interface Area: 0,76µm (30µ") AuCo 0,2 minimum
Solder Tails: 2,54µm (100µ") Sn100
Lead Free
Underplating: 1,27µm (50µ") Ni
Interface Area: 2,54µm (100µ") Sn100
Solder Tails: 2,54µm (100µ") Sn100
Other plating options available
Contact Pins
Electrical
Current Rating: 2,5 A
Withstanding Voltage: 1500 V DC at sea level
Environmental
Temperature Rating: -40°C to +120°C
Series 0,635
The information presented in this
of
Due to ongoing efforts to advance
design and material performance,
this information is subject to change
without notice.
A P Products GmbH
Ordering Information
5 xxxx x xxx-xx x x xxx xx x
Pin Length
Wave- or U-Band
Pin Pitch
Plating Information
Plating Dimension
Retention Feature
Position of Retention Feature
Type of Wire
Customer Specific
Contact Pins
A P Products GmbH A P Products Ltd. A P Products S.r.l.
Bäumlesweg 21 – 23 80 Cromwell Road Viale Abruzzi, 87
71093 Weil im Schönbuch Saffron Walden, CB11 4BE 20131 Milano
Germany Great Britain Italia
Tel: +49-7157-5348-0 Tel: +44-1799-526602 Tel: +39-02-29404697
Fax: +49-7157-5348-39 Fax: +44-1799-521408 Fax: +39-02-29523280
Web: www.ap-products.de Web: www.ap-products.co.uk Web: www.ap-products.it
E-mail: info@ap-products.de E-mail: info@ap-products.co.uk E-mail: info@ap-products.it
Engineering Note:
datasheet is accurate to the best
our knowledge.
28/06/2007 11.49.00
Loading...