Appleton Viamaster™ LED Series Emergency Battery Backup Luminaires Data Sheet

VIAMASTER™ LED SERIES EMERGENCY BATTERY BACKUP LUMINAIRES

Appleton® Linear LED luminaires provide over 1,000 lumens of illumination for 90 minutes of emergency lighting.

Compact and easy to install, they t the same footprint as their uorescent counterparts with all the benets LED

has to offer — year after year

• Provides up to 1250 lumens illumination for 90

minutes of emergency lighting.

• Functional diagnostic test self-initiates every 14 days

after initial start up.

• Duration test is automatically performed once per

year.

• Green and Red LED lamps indicate charging status
and provide fault warning.

• Positive safety switch disconnects power to LEDs
and LED driver to allow maintenance in hazardous

locations.

• 60,000+ hour LED life, for years of maintenance free

operation.

• Universal, high efciency, driver covers voltage
requirements for 120-277 Vac, 50/60 Hz +/- 10%.

• Standard 2KV surge suppression.

• Hinged cover with captive screws, and terminal
block wiring for easy installation and maintenance.

• Standard screw-type terminal block can accept UL/
CSA 26 to 10 AWG wire.

• Contemporary, low prole design suitable for tight

spaces.

• Field replaceable LED driver, battery management
module (BMM), battery pack, and lens.

• 5 Cell NiMH battery pack for longer emergency
capability.

• Plug in connectors on battery pack for easy

maintenance.

• Industry-leading thermal management for safe,
reliable operation over a wide temperature range.

• Easy retrot in same mounting footprint as
Appleton’s FV Series uorescent xtures.

• Full range of lumen outputs, with light distribution
equivalent to Appleton’s FV Series uorescent
xtures.

 Fusing option not available with Marine Outside Type (Salt Water) rating. Fusing option not permitted for cUL.

• 2 opposing 3/4” NPT hubs with adjacent
terminal blocks for thru wiring. (1) 3/4”
NPT close up plug provided.

SUITABLE LOCATIONS

• For use in locations where:

— Flammable gases, vapors and dusts are

present

— A high degree of corrosion resistance is

required

— Protection against dirt, water and

moisture is necessary

• Typical applications include:

— Oil reneries
— Petrochemical facilities
— Pulp and paper mills
— Food processing plants
— Waste and sewer treatment
— Underground tunnels
— General manufacturing facilities

STANDARD MATERIALS

• Housing: copperfree (4/10 of 1% max.)

aluminum

• Lens: thermal shock- and impact-resistant
polycarbonate lens

• Gasket: silicone rubber, mechanically

secured

• Bolts: stainless steel

• Close up plugs: nickel plated brass

— Mounting hardware: See ordering

informations

STANDARD FINISHES

• Housing/Reector: gray polyester

NEC/CEC RATINGS

• Class I, Division 2, Groups A, B, C, D

• Class I, Zone 2, Group IIC

• Class II, Division 2, Groups F, G

• Class III

• Zone 22, Group IIIB

• Type 3R, 4, 4X

• Marine Outside Type- For USA Only 

• IP66/67

• Suitable for Use in Wet Locations

NEC/CEC CERTIFICATIONS AND
COMPLIANCES

• UL Standard: UL 1598, UL 8750,
UL 844

• cULus Certied: E165014

• Ambient Temperature:

120-277 Volts:

-20 °C up to +55 °C
(-4 °F up to +131 °F)

Appleton Grp LLC d/b/a Appleton Group. The Appleton and Emerson logos are registered in the U.S. Patent and Trademark Ofce.
All other product or service names are the property of their registered owners. © 2017, Appleton Grp LLC. All rights reserved.

VIAMASTER™ LED SERIES EMERGENCY BATTERY BACKUP LUMINAIRES

Automatic Testing System (ATS)

Functional Full Duration

Starts within 24 to 45 hours after the initial powerup of the module Starts within 14 to 35 days after the initial power of the module

Occurs every 14 days after the initial aforementioned functional test Occurs every 364 days after the initial aforementioned functional test

Lasts for 5 minutes Lasts for the full duration of the rated emergency period

At the completion of functional and full duration tests, LED indicator will display the status of the emergency luminaire when AC is present

LED Indicator LED Array

Standard Catalog Numbers  LLEDA12LU2H LLEDA15LU2H LLEDA17LU2H

Voltage Range LU 120 – 277 Vac, 50/60 Hz

LED Lumens

Standard Operation

LED Lumens

Emergency Operation

Clear 2,200 4,400 7,800

Diffused 1,800 3,800 6,400

Clear 1,250

Diffused 1,000

Input Power (W) 24 45 83

Efficacy (LPW) 92 98 94

Ambient Temperature

-20 °C up to +55 °C

(-4 °F up to +131 °F)

T-Rating T3C @ +65 °C (+149 °F) T4 @ +65 °C (+149 °F)

Correlated Color Temperature (CCT) 5650

Color Rendering Index (CRI) 70

Fixture Length .843 m (33.2 in) .843 m (33.2 in) 1.2 m (47.2 in)

Fixture Weight 8.75 kg (19.3 lbs) 8.89 kg (19.6 lbs) 9.07 kg (20.0 lbs)

Housing: copperfree aluminum

Standard Materials

Finish: gray polyester

Lens: thermal shock- and impact-resistant polycarbonate lens

Lifetime 60,000+ hours

 For optional safety cable, add the suffix C to the end of the catalog number; example: LLEDA12LU2C.

For optional fuse, add the suffix F to the end of the catalog number; example: LLEDA12LU2F