Appleton U-Line™ 20 Amp Portable Receptacle with GFCI Catalog Page

Plugs and RecePtacles: nec/cec HazaRdous location
© November 2016
U-Line™ 20 Amp Portable Receptacle with GFCI
Explosionproof, Dust-Ignitionproof
125 Vac. For use on Hazardous or Non-Hazardous Receptacles.
NEC/CEC:
Class I, Division 1 and 2 Groups C, D Class II, Division 1 and 2 Groups F, G Class III NEMA 3, 3R, 7CD, 9FG
Applications
•  Provides required portable ground fault protection for  electrically-operated devices. Meets all UL and CSA  requirements for ground fault protection in hazardous locations.
•  Well suited for use in highly corrosive atmospheres and wet  locations.
Features
•   Arcing is conned within the device's interior.
•   Rated 20 Amp, 125 Vac, 5 mA trip setting.
•  Provides open neutral protection to maximize safety.
•   High intensity LED pilot light rated at 100,000 hours
•   Smooth operating test and reset buttons.
•   Heavy duty 0.91 meter (3 foot) SO power cord with U-Line™   20 Amp NEMA 5-20R plug.
•   Lightweight design.
•   Convenient carry/hanging handle. 
•   Plug mates with competitors comparable receptacles. The  receptacle also accepts their respective plugs.
Standard Materials
•   Covers and back box: cast copperfree (less than 4/10ths of 1%)  aluminum
•   Cover bolts, test and reset buttons and shafts: stainless steel
•   Carry/hanging handle: nylon covered galvanized steel
Standard Finish
•   Covers and back box: baked gray epoxy clad nish
Options
•   Incandescent pilot light available, contact local sales  representative. 
NEC/CEC Compliances and Certifications
•   UL Standard: 943, 1203
•   CSA Standard: C22.2 No. 30
Dimensions in Millimeters (Inches)
150.3 mm (5.92”)
390
158.7 mm 
70.6 mm  (2.78”)
(6.25”)
Cord: 914.4 mm 
327.6 mm 
(36.00”)
(12.90”)
20
Green LED U2023PGFID1G3
Red LED U2023PGFID1R3
Plugs and RecePtacles: nec/cec HazaRdous location
© November 2016
U-Line™ 20 Amp Portable Receptacle with GFCI
Mounting Boxes
Single, Two, Tandem, and One through Five Gang Boxes.
NEC/CEC:
Class I, Division 1, Groups C, D Class I, Division 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3, 3R, 7CD, 9EFG
EFD Cast Device Mounting Boxes
Type
Single Gang
Dead-End
Feed-Thru
Two Gang
Dead-End
Feed-Thru
Hub Size
(Inches)
1/2 EFD150NLQ EFD150ANLQ 3/4 EFD175NLQ EFD175ANLQ
1 EFD110NLQ EFD110ANLQ 1/2 EFDC150NLQ EFDC150ANLQ 3/4 EFDC175NLQ EFDC175ANLQ
1 EFDC110NLQ EFDC110ANLQ
1/2 EFD250NLQ EFD250ANLQ 3/4 EFD275NLQ EFD275ANLQ
1 EFD210NLQ EFD210ANLQ 1/2 EFDC250NLQ EFDC250ANLQ 3/4 EFDC275NLQ EFDC275ANLQ
1 EFDC210NLQ EFDC210ANLQ
Catalog Number
Malleable Iron Aluminum
Tandem
1/2 EFDT50NLQ
Dead-End
Feed-Thru
Blank Bodies for Brazed Hubs
Construct complete catalog number per following page. Hubs will be located in center of walls and evenly spaced unless otherwise specified. Where spacings are critical, submit sketch showing spacing requirements.
1 Gang EFD1NL 2 Gang EFD2NL 3 Gang EFD3NL 4 Gang EFD4NL 5 Gang EFD5NL
For tandem bodies, eternal seals must be installed within 1.52 meters (5 feet) of each conduit entrance or Class I, Group C and D.
3/4 EFDT75NLQ
1 EFDT10NLQ 1/2 EFDCT50NLQ 3/4 EFDCT75NLQ
1 EFDCT10NLQ
391
Loading...