Stylmaster™ Strobe Luminaires
VISUAL SIGNAL: NEC/CEC ENCLOSED AND GASKETED
© May 2016
Enclosed and Gasketed
NEC: Pendant Mount
Class I, Division 2, Groups A, B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3R, 4
Marine Outside Type (Saltwater)
NEC: Ceiling and Wall Bracket Mount
Class I, Division 2, Groups A, B, C, D
NEMA 3R, 4
Applications
• Enclosed and gasketed xtures suitable for use in:
— Marine and wet locations
— Industrial processing
— Chemical processing
— Areas where ammable gases and vapors are present under
conditions dened by NEC Class I, Division 2; Class II,
Division 1 and 2; and Class III
• For use in areas where audible signals cannot be heard.
• Used to warn of unsafe conditions and other communication
needs.
• Fixtures are also suited for use in non-hazardous areas where
there are:
— Severe weather conditions
— Excessive moisture, dirt, dust
— Corrosive atmospheres
— High ambient temperatures are encountered
• Typical applications include:
— Pulp and paper mills
— Processing plants
— Chemical plants
— Oil reneries
— Foundries
— Manufacturing plants
— Storage areas
— Marine applications
Features
• Modern styling, with clean-line mounting hood and prismatic
glass globe, plus optional guard.
• Globe seats rmly against silicone gasket in mounting
hood to keep out dirt and moisture. Full threads eliminate “cross
threading.”
• Optional guard protects glass from damage and has
exclusive snap-on attachment feature for quick installation
and fast servicing.
• Fixtures operate safely in high ambient temperatures.
• Strobe: 65 ashes per minute. 800,000 peak candlepower.
• Fixtures are complete with lamp.
• Lens available in ve colors: red, amber, blue, green and
clear (factory installed).
• Heat- and impact-resistant globes have smooth
dust-resistant exterior.
• Fixture is suitable for mounting globe up or globe down utilizing
pendant, ceiling or wall bracket type mounts.
• Minimum operating temperature is -25 °C (-13 °F).
Standard Materials
• Mounting hoods: copperfree (4/10 of 1% max.) aluminum
• Guards: pressure cast copperfree (4/10 of 1% max.) aluminum
• Globes: prismatic glass
Standard Finish
• Mounting hoods and guards: powder coat epoxy
NEC/CEC Certifications and Compliances
• UL Standard: UL 1203, UL 1638
• UL Listed: E207738
• CSA Standard: C22.2 No. 25
• cUL Listed: E207738
CEC:
Class I, Division 2, Groups A, B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
CSA Enclosure 3
Fixtures are suitable for mounting in any position – including globe up or
globe down – utilizing pendant, ceiling or wall bracket type mounts.
Stylmaster™ Strobe Luminaires
VISUAL SIGNAL: NEC/CEC ENCLOSED AND GASKETED
© May 2016
Enclosed and Gasketed
NEC: Pendant Mount
Class I, Division 2, Groups A, B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3R, 4
Marine Outside Type (Saltwater)
Order using catalog numbering guide below or select catalog number from tables on following pages.
Catalog Numbering Guide For VP Stylmaster Strobe Luminaires
VP A S 75 120AC CL G
Series:
VP - Stylmaster
Mounting Hood:
A - Pendant
X - Ceiling
WB - Wall Bracket
Technical Data: Thermal Suitability of Stylmaster Strobe
NEC: Ceiling and Wall Bracket Mount
Class I, Division 2, Groups A, B, C, D
NEMA 3R, 4
Lamp Type:
S - Strobe
Hub Size:
75 - 3/4”
CEC:
Class I, Division 2, Groups A, B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
CSA Enclosure 3
Voltage Current:
120AC - 120 Vac
240AC - 240 Vac
1248DC - 12-48 Vdc
24PDC - 24 Vdc
250DC - 250 Vdc
Options:
G - Guard
Globe:
CL - Clear
AM - Amber
BL - Blue
GR - Green
RE - Red
Operating Temperatures
Ambient
Temp. °C (°F)
40 (104) T2A T4A
55 (131) T2 T4A
65 (149) T1 T4
Operating Temperatures Represent the Maximum Internal Temperature for Class I, Division 2 Locations and
Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations.
“T”
Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6
Temp
Range
(°C)
Temp.
Range
(˚ºF)
351-
450
664-
842
326-
350
619-
662
301-
Class I, Division 2 Groups A,B,C,D
Pendant, Ceiling and Wall Bracket
281-
300
538-
572
261-
280
502-
536
325
574-
617
231-
260
448-
500
216-
230
421-
446
201-
215
394-
419
181-
200
358-
392
166-
180
331-
356
Class II, Division 1and 2 and Class III
161-
165
322-
329
Pendant Mount
136-
121-
160
277-
320
135
250-
275
101-
120
214-
248
86-100 85
187-
212
185
NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National
Electrical Code and the Canadian Electrical Code.
Diode Polarized (current limiter supplied as standard).