Appleton Power Supplies Catalog Page

Power Supplies
SHP Series: Heavy Duty Modular Power Supplies
The SolaHD SHP Series high power, intelligent modular power supplies, range from 1500 through 4920 watts and
were designed for optimum exibility. The modular design
All units have power factor corrected inputs, an end mounted fan for cooling and a variety of built-in signals and
controls. High reliability and a exible design make these
power supplies an excellent choice for process control and semiconductor fabrication applications.
Applications
• Process Controls
• Semi-Conductor Fabrication
• Automated Service Equipment
Features
• Available in intelligent and non-intelligent models
• Single, dual and triple output modules congurable in
combinations up to 24 different outputs
• Single phase and three phase inputs
2
• I
C control in intelligent modules
• End mounted intelligent fan (speed control/fault status)
• Voltage adjustment on all outputs (manual or I
2
C)
• CANBUS and RS-485 optional interface
• Overload protection on all outputs
• Power factor correction (.99 typ.)
• Congurable output UP/DOWN sequencing
• Modular Construction
• Congurable input and output OK signals and indicators
• Programmable voltage, current limit, inhibit/enable
through I
2
C
• Three year limited warranty
Certifications and Compliances
UL Recognized Component, ITE, E137632
- UL 60950-1/CSA C22.2 No. 60950-1, 2nd Edition
E137632
Related Products
• Surge Protective Devices
• SCD DC to DC Converters
• Active Tracking
®
Filters
Standard Offering Selection Table
Catalog Number Output Voltage Output Current Watts
SH30-4LS-0Z
SH30-4NS-0Z
SH30-4QS-0Z
SH30-4RS-0Z
SH30-4WS-0Z
SH45-4QS-3QS-4Z
12 V 125 A 1500
15 V 100 A 1500
24 V 62 A 1500
28 V 53 A 1500
48 V 31 A 1500
24 V 92 A 2000
Accessories Table
Catalog Number Description
73-769-001
70-841-004
70-841-023
Mating Connector Kit for Control & Signals (J1 Connector)
Mating Connector Kit for I
USB to I2C adapter
2
C Interface (J2 Connector)
- Low Voltage Directive
- IEC/EN 60950-1, 2nd Edition
• RoHS Compliant
© December 2018
153
Power Supplies
Specifications
Description SH30 SH45 S3H3 S3H5
Input
Input voltage range
Frequency
Inrush current
Efficiency
Power factor
Turn-on time
Hold-up time
AC OK
Output voltage range
Factory set point accuracy
2
I
C output program accuracy
Margining
Line/load regulation
Ripple
Dynamic response
Recovery time
Overcurrent protection
Short-circuit protection
Overvoltage protection
Thermal protection
Remote sense
Single wire parallel
DC OK
Minimum load
Housekeeping bias voltage
Module inhibit
Output/output isolation
Global inhibit/enable
Operating temperature
Storage temperature
Humidity
Vibration
MTBF demonstrated
Electromagnetic susceptibility
EMI filter Radiated EMI
Case dimensions
H x W x D - in (mm) Case weight - lbs (kg) Slots available per case Limited warranty
Single output module and main output of the dual output module 105–120% of rated output current. Aux output of dual output module
105–140% of rated output current. Special programmable OCP delay on 1500 W module from 100 ms to 25.5 s with shutdown features.
Protected for continuous short-circuit; recovery is automatic upon removal of short. Shutdown mode available on the 1500 W module.
90–264 Vac; 120–300 Vdc; Single phase 170-264 Vac; Three phase
47–63 Hz
40 A peak maximum (soft start)
Up to 85% at full load
0.99 typical
2
AC on 1.5 s typical, inhibit/enable 150 ms typical, congurable through I
C; 50 ms internal turn-on delay (dual output only)
10 ms minimum
>5 ms early warning before outputs lose regulation, full cycle ride through at 50 Hz, congurable through I
Output
±10% minimum for all outputs, user-adjustable pot, full adjustment range using I
0.01
±5%
±4–6% nominal analog (single output module only)
0.4% or 20 mV maximum (1% maximum for 1500 W module)
RMS: 0.1% or 10 mV maximum; Pk-Pk: 1.0% or 50 mV maximum; bandwidth limited to 20 MHz
<2% or 100 mv with 25% load step
Within 1% in <300 μs
Congurable through I
2
C with load calibration required (except for 1500 W module).
Single output module: 2–5.5 V, 122–134%; 6–60 V, 110–120%; Dual output module: 2–6 V, 122–134%; 8–28 V, 110–120%
Triple output module: No overvoltage protection provided; Congurable through I
All outputs are disabled when the internal temperature exceeds the safe operating range; congurable through I
Up to 0.5 V drop (not available on triple output module)
Current share to within 2% of total rated current
±5% of nominal; congurable through I
2
C
Not required
5 V dc @ 1.0 A maximum present whenever ac input is applied
Congured and controlled through I
2
C
>1 MΩ, 500 V
TTL, Logic “1” and Logic “0”; congurable through I
2
C
Environmental
-40°C to +70°C ambient; derate each output 2.5% per degree from 50°C to 70°C
-40°C to +85°C
10% to 95% RH, non-condensing
IEC68-2-6 to the levels of IEC721-3-2
>550,000 hr. @ full load, 220 V ac, 25°C ambient
Safety
EN61000-4-2, EN61000-4-4, EN61000-4-5 Level 3
CISPR 22/EN55022 Level B when installed in a properly grounded and shielded metal enclosure
CISPR 22/EN55022 Level B when installed in a properly grounded and shielded metal enclosure
General
5 x 5 x 11
(127.0 x 127.0 x 279.4)
5 x 8 x 11
(127.0 x 203.2 x 279.4)
5 x 5 x 11
(127.0 x 127.0 x 279.4)
6.2 (2.81) 9.0 (4.08) 6.2 (2.81) 9.0 (4.08)
9 14 9 14
3 years
2
C
2
C
2
C
2
C
5 x 8 x 11
(127.0 x 203.2 x 279.4)
154
© December 2018
Power Supplies
Output Module Specification Overview
Intelligent Module Code 1 2 3 4 5 6
Module Type Single Single Single Single Dual Triple
Max output power
Max output current
1
2
Output voltages available
Standard voltage increments
Remote sense
Remote margin
2
V-Program - I
C control
Active current share
2
Module inhibit - I
C control
Module inhibit - Analog
Overvoltage/Overcurrent protection
Minimum load required
Slots occupied in any SHP case
Weight
- lbs (kg)
210 W 360 W 750 W 1500 W 144 W 36 W
35 A 60 A 150 A 140 A 10 A 2 A
2-60 V 2-60 V 2-60 V 6-60 V
8-15, 24-28; 8-15,
8-15; 8-15, 2-6; 2-6,
2-6; 24-28, 24-28;
24-28, 2-6
8-15, 8-15, 2-6; 8-15,
8-15, 8-15; 8-
15, 8-15, 18-28; 8-15,
18-28, 2-6
25 25 25 18 16 18
Yes Yes Yes Yes Yes Ye s No
Yes Yes Yes Yes No No No
Yes Yes Yes Yes Yes Ye s No
Yes Yes Yes Yes Yes No No
Yes Yes Yes Yes Yes Ye s Ye s
Yes Yes Yes Yes No No No
Yes Yes Yes Yes Yes Ye s Ye s
No No No No No No No
1 2 3 4 1 1
0.6 (0.27) 1.0 (0.45) 1.6 (0.73) 2.0 (0.91) 0.6 (0.27) 0.5 (0.23)
Non-Intelligent Module Code 1 2 3 - 5 6
Module Type Single Single Single - Dual Triple
Max output power
Max output current
Output voltages available
Standard voltage increments
Remote sense
Remote margin/V-Program
Module inhibit - isolated
Single wire active current share
Overvoltage/Overcurrent protection
Minimum load required
Slots occupied in any SHP case
3
Weight
- lbs (kg)
210 W 360 W 600 W - 144 W 36 W
35 A 60 A 120 A - 10 A 2 A
2-60 V 2-60 V 2-60 V - 2-28 V 2-28 V
25 25 25 - 19 18
Yes Yes Yes - Yes Ye s No
Yes Yes Yes - No No No
Yes Yes Yes - - - -
Yes Yes Yes - Yes No -
Yes Yes Yes - Yes Ye s Overcurrent
No No No -
Yes (10%
of load)
No No
1 2 3 - 1 1
0.6 (0.27) 1.0 (0.45) 2.0 (0.91) - 0.6 (0.27) 0.5 (0.23)
Notes:
1) For dual & triple output modules: the max output power is the total amount of power for the module.
2) For dual & triple output modules: the max output current is the total max current for each output.
3) To calculate the total weight of the power supply: sum up the weight for each module and add it to the weight of the case given under the Specications Table.
© December 2018
155
Power Supplies
Catalog Numbering Selection
Intelligent Model
Example: 4500 W case with: a 1500 W module set at 24 V @ 62.5 A and a 750 W module set at 24 V @ 30 A connected in parallel for a total of 24 V @ 92.5 A single output.
SH45-4QS-3QS-4Z
Case Size Module Codes Case Options
Single Phase Input SH30 = 1500 W - 3210 W, 9 Slots SH45 = 1800 W - 4500 W, 14 Slots
Three Phase Input S3H3 = 3120 W, 9 Slots S3H5 = 4920 W, 14 Slots
1 = 210 W single O/P (1 slot) 2 = 360 W single O/P (2 slot) 3 = 750 W single O/P (3 slot) 4 = 1500 W single O/P (4 Slot) 5 = 144 W dual O/P (1 slot) 6 = 36 W triple O/P (1 slot) X = Extra 30mS hold-up (1 slot)
1
Output Voltage Codes
See Output Module Voltage/Current Table for Intelligent Modules
Module Option Codes
S = Standard T = Module enable U = Constant current V = T & U combined W = Shutdown mode for 1500 W Y = T & W combined
Output Voltage/Current Table for Intelligent Modules
SHP Series: Intelligent Modules
Single
210 W 750 W
360 W 1500 W
Dual Triple
144 W 36 W
Notes:
1) Certications pending.
2) Increments of current not shown can be achieved by paralleling modules. See Parallel Code Table.
3) Total output power on dual and triple modules must not exceed the max output power rating for the module.
4) I2C Adjustment Ranges apply to single output modules only.
Voltage
Module Code
2 V
2.2 V
3 V
3.3 V
5 V
5.2 V
5.5 V
6.0 V
8.0 V
10 V
11 V
12 V
14 V
15 V
18 V
20 V
24 V
28 V
30 V
33 V
36 V
42 V
48 V
54 V
60 V
Voltage
Code
A B C D
E F
G
H
I
J
K
L
M
N O
10.5 A 18 A 37.5 A 75 A - - - 0.5 A 0.5 A 18.0 - 22.0 V
P
8.5 A 15 A 30 A 62.5 A 4 A 2 A - 0.5 A 0.5 A 21.6 - 26.4 V
Q
6.7 A 11 A 26.8 A 53.5 A 3 A 2 A - 0.5 A 0.5 A 25.2 - 30.8 V
R
6.5 A 11 A 25 A
S
6.2 A 10.9 A 22.7 A
T
5.8 A 10 A 20.8 A
U
4.2 A 7.5 A 16 A
V
4.0 A 7.5 A 15.6 A 31.2 A - - - - - 43.2 - 52.8 V
W
3.7 A 6.0 A 13.9 A 27.7 A - - - - - 48.6 - 59.4 V
X
3.5 A 6.0 A 12.5 A 25 A - - - - -
Y
Single Output Dual Output
1 2 3 4 5 5 6 6 6
35 A 60 A 150 A - 10 A 10 A - - 2 A 1.8 - 2.2 V
35 A 60 A 150 A - 10 A 10 A - - 2 A 2.0 - 2.4 V
35 A 60 A 150 A - 10 A 10 A - - 2 A 2.7 - 3.3 V
35 A 60 A 150 A - 10 A 10 A - - 2 A 3.0 - 3.6 V
35 A 60 A 150 A - 10 A 10 A - - 2 A 4.5 - 5.5 V
35 A 60 A 144 A - 10 A 10 A - - 2 A 4.7 - 5.7 V
34 A 58 A 136 A - 10 A 10 A
23 A 42 A 97.5 A 140 A 10 A 10 A
20 A 36 A 84.4 A 140 A 10 A 4 A
18 A 32 A 75 A 140 A 10 A 4 A 1 A 1 A 1 A 9.0 - 11.0 V
17 A 31 A 68 A 136.3 A 10 A 4 A 1 A 1 A 1 A 9.9 - 12.1 V
17 A 30 A 62.5 A 125 A
14 A 21 A 53.5 A 107 A
14 A 20 A 50 A 100 A
11 A 19 A 41.6 A 83.3 A
Paralleling Options 0 = No Parallel Option 1-19 = See Parallel Code Table
Special Options Z = No Options
R = Reverse air N = Not used G = Global enable F = Fan Idle w/inhibit
H = Opt R + Opt G
I = Opt R + Opt F J = Opt G + Opt F K = Opt R + G + F C = CANBUS/RS485 (73-544-001) B = USB (73-546-001)
2
3
Triple Output
I2C
Adjustment
Ranges
Module Code
- - 2 A 5.0 - 6.1 V
- - 2 A 5.4 - 6.6 V
1 A 1 A 1 A 7.2 - 8.8 V
10 A 4 A 1 A 1 A 1 A 10.8 - 13.2 V
9 A 4 A 1 A 1 A 1 A 12.6 - 15.4 V
8 A 4 A 1 A 1 A 1 A 13.5 - 16.5 V
- - - 0.5 A 0.5 A 16.2 - 19.8 V
50 A - - - - - 27.0 - 33.0 V
35.8 A - - - - - 29.7 - 36.3 V
35.8 A - - - - - 32.4 - 39.6 V
35.7 A - - - - - 37.8 - 46.2 V
54.0 - 66.0 V
4
156
© December 2018
Loading...
+ 8 hidden pages