Appleton Mercmaster III Low Profile Compact Fluorescent Luminaires, 650426000 Instruction Sheet
PENDANT HOOD
Ceiling
KPA-75
KPA-100
KPAF-75
Jct Box
KPAF-100
Set Screw
Secure Pendant Hood to the 3/4" or 1" Conduit Stem, and Tighten the Set
Screw inside Hood.
CONE MOUNT
KPCH-75
or
Set Screw
KPCH-100
Secure Cone Hood to the 3/4" or 1" Conduit
Stem,and Tighten the Set Screw.
CEILING MOUNT
KPC-75 or KPC-100
NOTE - Remove Unused Conduit Plugs, and Re-install with Pipe Sealant.
Mount Ceiling Hood Directly to Structural Member,
Conduit, or Flush Mounted Jct Box. Four Drill marks
on 3-1/2" Pitch Dia are Provided for Jct Box Mtg.
Install Gasket Supplied with Jct Box between Box and Hood.
WALL MOUNT
KPWB-75
or
Jct Box
Gasket
KPWB-100
Screw (4)
Fasten junction box to structural member.
Feed supply wire through gasket and wall adapter.
Fasten wall adapter to junction box with screws provided.
Gasket supplied with junction box is required between mounting hood and
junction box.
STANCHION MOUNT
KPST-125
or
KPST-150
Set Screw
NOTE - 5 Full Threads Must Be Engaged.
Secure Stanchion to the 1-1/4" or 1-1/2" Conduit,
Orient and Tighten Set Screw.
BALLAST HOUSING INSTRUCTIONS
1. Mount Hood to Conduit or Structural Member as shown.
2. Feed proper Temperature Supply Wire into Hood (See Nameplate).
3. Hang Ballast Housing on Hinge and Connect the Power to Proper
Ballast Lead.
(See Wiring Diagrams.)
4. Connect Supply and Housing Bonding Leads to Green Bonding Lead
in Mtg Hood.
5. Fold All Excess Supply Leads and Fasten in Hood with Bundling Tie
Provided to Avoid Pinching Wires.
6. Swing Ballast Housing Up and Secure with Hex Nut and Washer
Combination and Tighten Securely.
7. Install Lamp, Checking both Lamp Type and Wattage for Proper
Lamp. Seat Lamp Firmly.
8. Install Globe or Refractor, Optional Reflector and/or Guard per
Fixture Fitting Label in Ballast Housing. (See Accessory Tree.)
25o STANCHION MOUNT
KPS-125
or
KPS-150
NOTE - 5 Full Threads Must Be Engaged.
Secure Stanchion to the 1-1/4" or 1-1/2"
Conduit, Orient and Tighten Set Screw.
Ceiling
Bundling Tie
Hinge
Hood
Hinge Pin
Ballast Hsg
Latch
Set Screw
Hex Nut &
Washer
Combination
Grd Wires
Gasket
Loading...