Appleton Intraground™ N1 and N2 Series Control Stations Catalog Page

Intraground™ N1 and N2 Series Control Stations

Controls: nEC/CEC Explosionproof Control stations and switChEs

© November 2016

Nonmetallic

10 Ampere, 600 Vac Max. for Heavy Duty Use. N1 Series – Neutral Color; N2 Series – Blue Color.

NEC:

Class I, Division 1 and 2, Groups B,C, D
Class II, Division 1 and 2, Groups E, F, G
Class III

Description Diagram Catalog Number

Push Button — Factory Sealed — Momentary Contact

10 Amp 600 Vac Heavy Duty 1/2” thread size (NPSM). Furnished with 1/2” to 3/4” enlarger, Weather Boot, Guard,
Start, Stop and Blank Nameplates.

SPBB-U1-Q

SPBB-U2DBL

Push Button — Red Mushroom Head — Factory Sealed — Maintained Contact

Rectangular Button with Weather Boot

Nameplates for Rectangular Push Buttons

SNP-OFF-Q

SNP-ON-Q

Single Push Button Universal SPBB-U1-Q

Double Push Button Universal

10 Amp 600 Vac Heavy Duty 1/2” thread size (NPSM). Furnished with 1/2” to 3/4” enlarger and Emergency Stop
Nameplate (guard not furnished).

Single Push Button Universal SMPB-U1-Q

Furnished with Start, Stop and Blank Nameplates NBN-WB

Blank SNP-B-Q Off SNP-OFF-Q
Forward SNP-FWD-Q On SNP-ON-Q
Jog SNP-JOG-Q Reverse SNP-REV-Q
Run SNP-RUN-Q Open SNP-OPEN-Q
Stop SNP-SP-Q Close SNP-CLOSE-Q

Start SNP-ST-Q Up SNP-UP-Q
Down SNP-DOWN-Q Test SNP-TEST-Q
Fast SNP-FAST-Q Low SNP-LOW-Q
Slow SNP-SLOW-Q High SNP-HIGH-Q
Raise SNP-RAISE-Q
Lower SNP-LOWER-Q
Reset SNP-RESET-Q

SPBB-U2DBL

Push Button Replacement Locking Guards — Glass Reinforced Polypropylene — Gasketed

Maintained
Mushroom Head

Single Guard

Switch Guard

Double Guard

 Suitable for Class I, Group B when installed in an enclosure rated for Class I, Group B.

Has hole for 1/4” hasp.

Single Guard (Maintained Switch) SMPB-LG

Single Guard NPB-LG1
Double Guard NPB-LG2
Single Guard (No Lockout Holes) NPB-LG1-LL
Double Guard (No Lockout Holes) NPB-LG2-LL

118