
Hinged Steel Poles
POLES/HANGERS: NEC/CEC ORDINARY LOCATION ARCHITECTURAL
© February 2018
NEC/CEC:
Rated for Ordinary (Unclassied) Locations
Applications
• To mount single or multiple luminaires to heights from 6.1 to
9.1 m (20 to 35 ft). Hinged design allows easy servicing of
luminaires at shoulder height.
Features
• Shafts are structural steel with a minimum yield strength of
46,000 psi.
• Heavy duty hinge assembly secures upper section to lower
section with high strength 19.05 mm (3/4 in) Dia. bolt. A exible
protective channel is provided to protect wires when pole is
lowered.
• Pole counter-balance is designed to offset weight of luminaires
and is made from steel with minimum yield strength of 36,000
psi.
• Base plates are of structural quality hot-rolled steel with
minimum yield strength of 36,000 psi.
• A 76.2 x 127 mm (3 in x 5 in) reinforced handhole with cover
and grounding lug 355.6 mm (14 in)above the pole base is
standard.
• Anchor bolts are furnished complete with nuts and washers,
and are of 50,000 psi steel.
Standard Materials/Finishes
• Lighting poles are steel with bronze powder coat nish (to
match Appleton xtures) or galvanized nish
Options
• An optional lowering winch is available and recommended for
easy one-man operation of hinged poles. (Only one lowering
winch per installation is required because winch assembly
mounts from pole to pole and dismounts for easy storage.)
Lowering winch is furnished with mounting hardware, 7.62 m
(25 ft) of 4.8 mm (3/16 in) galvanized wire rope and safety snap
hook.
101.6
(4.0)
355.6
(14.0)
50.8 mm (2 in) Pipe Size Tenon
(60.5 mm (2-3/8 in))
Accessory: GLW –
Lowering Device (Winch)
GLW must be ordered separately
at an additional cost.
Mounting
Height
m (ft)
6.1 (20) 136 (300) 127.0 (5) 127.0 (5) 279.4 (11) 279.4 (11.0) 25.4 (1.0) 25x1016 (1x40) G-PHSH-20 G-PHSH-20-GAL GLW20
7.32 (24) 204 (450) 152.4 (6) 152.4 (6) 304.8 (12) 292.1 (11.5) 25.4 (1.0) 25x1016 (1x40) G-PHSH-24 G-PHSH-24-GAL GLW24
9.14 (30) 281 (620) 152.4 (6) 152.4 (6) 304.8 (12) 292.1 (11.5) 25.4 (1.0) 25x1016 (1x40) G-PHSH-30 G-PHSH-30-GAL GLW30
10.67 (35) 356 (785) 152.4 (6) 152.4 (6) 304.8 (12) 292.1 (11.5) 25.4 (1.0) 25x1016 (1x40) G-PHSH-35 G-PHSH-35-GAL GLW35
Dimensions may vary—Consult your local sales representative for specifications.
Anchor bolts and templates are preshipped ahead of lighting poles.
Average
Pole
Weight
A
kg (lb)
Pole Shaft Size
mm (in)
Base Size
(Square)
Base Plate mm (in)
Bolt
Cirle
Base
Thickness Bronze GalvanizedBottom S Top
Anchorage:
Anchor Bolt
Dia. X Length
mm (in)
Catalog Number
Winch
Catalog
Number
710