Appleton Guide: Appleton and O-Z/Gedney Liquidtight Connectors Selector Guide Manuals & Guides

PRODUCT SELECTOR - CONNECTORS FOR LIQUIDTIGHT FLEXIBLE METAL CONDUIT (LFMC)
O-Z/Gedney™ Product Family Material Finish Trade Size Configurations Selection Key
4Q and 4Q-T Series
4Q-FM Series Malleable Iron Zinc Electroplate 3/8" to 5"
4Q-WM Series
Malleable Iron and Stainless Steel
Zinc Electroplate 3/8" to 4" Straight
4Q-LT Ground-Tite™ Series
Malleable Iron Zinc Electroplate 3/8" to 6"
4Q-FML Ground-Tite™
Malleable Iron Zinc Electroplate 3/8" to 5"
Series
4Q-TG Series
Malleable Iron
Hot Dip / Mechanically Galvanized
3/8" to 6"
Straight Female Hub for connection to RMC/IMC
Straight (3/8” to 6”), 45° (3/8” to 5”), 90° (3/8” to 5”)
Female Straight Hub for connection to RMC/IMC
Straight (3/8" to 6"), 45° (3/8" to 5"), 90° (3/8” to 5”)
Standard Liquidtight connector. Use with LFMC in heavy commercial and industrial applications
Female hub threads directly to conduit threads. Transition from RMC/IMC to LFMC in heavy commercial and industrial applications
Strain Relief with stainless steel wire-mesh grip. Prevents conduit pull-out and alleviates flexing stress
To externally ground LFMC in commercial and industrial applications; maximum 6 foot length of LFMC
To externally ground LFMC in commercial and industrial applications; maximum 6 foot length of LFMC
Hot Dip / Mechanically Galvanized connectors for atmospheres containing severe corrosives
Appleton™ and O-Z/Gedney™ Material Finish Trade Size Configurations Selection Key
High grade stainless steel
4QSS-T Series316 Grade
Stainless Steel
Natural 3/8" to 2" Straight, 45°, 90°
LFMC connectors are ideal in areas that are subject to severe corrosive influences
4QS and 4QS-T Series
Steel and Malleable Iron
Zinc Electroplate 3/8" to 4" Straight, 45°, 90°
Standard Liquidtight connector. Use with LFMC in commercial and light industrial applications
Cost-competitive liquidtight LMM and LML Series
Zinc Diecast Natural 3/8" to 4" Straight, 90°
connectors. Use with LFMC in
residential and light commercial
applications
For use with Type B Liquidtight NMM and NML Series
Nylon Natural 3/8" to 1" Straight, 90°
Flexible Nonmetallic Conduit
(LFNC) in residential and light
commercial installations
O-Z/Gedney™ 4Q = plain throat; O-Z/Gedney™ 4Q-T = insulated throat
For product information: www.emerson.com
1.800.621.1506
PRODUCT SELECTOR - CONNECTORS FOR LIQUIDTIGHT FLEXIBLE METAL CONDUIT (LFMC)
Appleton™ Material Finish Trade Size Configurations Selection Key
ST and STB Series
STF Series
STB-SR, STB-FSR and STN-SR Series
ST-L and STB-L Series
Steel and Malleable Iron
Steel and Malleable Iron
Steel, Malleable Iron and Stainless Steel
Steel and Malleable Iron
ST-AL SeriesAluminum
(copperfree)
STN Series
Steel and Malleable Iron
Steel: Zinc Electroplate Malleable: Triple Coat
Steel: Zinc Electroplate Malleable: Triple Coat
Steel: Zinc Electroplate Malleable: Triple Coat
Steel: Zinc Electroplate Malleable: Triple Coat
3/8" to 4" Straight, 45°, 90°
3/8" to 4" Straight
3/8" to 3" Straight, 45°, 90°
3/8" to 4" Straight, 45°, 90°
Natural 3/8" to 4"
Steel: Zinc Electroplate Malleable: Triple Coat
3/8" to 4"
Straight (3/8" to 4"), 90° (3/8" to 2")
Straight (3/8" to 4"), 90° (3/8" to 1")
Standard Liquidtight connector.
Use with LFMC in heavy
commercial and industrial
applications
Female hub threads directly
to conduit threads. Transition
from RMC/IMC to LFMC in heavy
commercial and industrial
applications
Strain Relief with stainless
steel wire-mesh grip. Prevents
conduit pull-out and alleviates
flexing stress
To externally ground LFMC
in commercial and industrial
applications; maximum 6 foot
length of LFMC
Use with LFMC in corrosive
industrial applications where
aluminum material is prefered
for corrosion resistance
Space-saving hub with insulated
throat fits almost flush inside
sheet metal enclosure,
maximizing interior wiring space
STNM and STNM-SR Series
PG-STB and ISO-STB Series
Appleton™ ST = plain throat; Appleton™ STB = insulated throat
Appleton™ and O-Z/Gedney™ Liquidtight Connectors are suitable for use in the following hazardous locations:
• Class I Division 2 per NEC 501.10(B)(2)
• Class I Zone 2 per NEC 505.15(C)(2)
• Class II Division 1 per NEC 502.10(A)(2)
• Class II Division 2 per NEC 502.10(B)(2)
• Class III Division 1 per NEC 503.10(A)(3)
• Class III Division 2 per NEC 503.10(B)
• Intrinsically Safe Systems per NEC 504.20
• Bonding locknuts are recommended when installed in slipholes
• LFMC shall include a wire-type Equipment Bonding Jumper per NEC 501.30(B), 502.30(B)and 503.30(B)
Where flexibility is not required, LFMC is suitable as a ground return path under the following conditions (reference NEC 350.60):
• Per NEC 250.118(6)(a), the conduit is terminated in listed fittings (i.e. Appleton™ ST and O-Z/Gedney™ 4Q and LM Series)
• Per NEC 250.118(6)(b), trade sizes 3/8” and 1/2” contain conductors protected by max 20 amp overcurrent protection
• Per NEC 250.118(6)(c), trade sizes 3/4” to 1-1/4” contain conductors protected by max 60 amp overcurrent protection
• Per NEC 250.118(6)(d), the ground fault current path does not exceed 6 feet
• Larger sizes and/or higher overcurrent protection will require an equipment grounding conductor (EGC) Appleton™ ST-L and STB-L, O-Z/Gedney™ 4Q-LT and 4Q-FML are recommended for connection to maximum 6 foot external equipment grounding conductor (EGC) per NEC 250.102(E)(2). Where flexibility is required after installation to allow movement or minimize vibration, an equipment grounding conductor (EGC) must be installed per NEC 250.118(6)(e).
Steel and Malleable Iron
Steel and Malleable Iron
Zinc Electroplate 3/8" to 2" Straight, 90°
Steel: Zinc Electroplate Malleable: Triple Coat
PG: 3/8" to 2" ISO: 3/8" to 1"
Straight, 45°, 90°
For use with Type A Liquidtight Flexible Nonmetallic Conduit (LFNC). Insulated throat is standard
PG and ISO metric threads on male hub body with ferrule and cap to accept standard trade size LFMC
United States: 1.800.621.1506 | Asia/Pacic: + 65.6556.1100 | Australia: + 61.3.9721.0348 Canada: + 1.888.765.2226 | China: + 86.21.3338.7000 | Europe: + 33.3.22.54.13.90 Mexico/Latin America: + 52.55.5809.5049 | Middle East/Africa/India: + 971.4.811.8100 www.emerson.com
Appleton Grp LLC d/b/a Appleton Group. The Emerson logo is registered in the U.S. Patent and Trademark Ofce. All other product or service names are the property of their registered owners. © 2018, Appleton Grp LLC. All rights reserved.
Loading...