Appleton Ground Fault Circuit Interrupters Catalog Page

2.00

11.00

McGill™ Ground Fault Circuit Interrupters

REELS AND SWITCHES: ORDINARY LOCATION POWERCORDS

© February 2017

NEC/CEC:

Listed for Ordinary Locations

Applications

• Protects people and equipment by interrupting electrical power
when loads have a potentially lethal ground current in excess of
6 milliamps.

• The portable construction enables use of these devices in a
variety of applications, such as power tools or hand lamps.

• Indoor/Outdoor usage.

Features

• Manual reset is required after trip (fault) condition or power
outage occurs to prevent unmonitored equipment start-up.

• 15 and 20 Amp, 120 and 240 Volt, 60 Hz models available.

• 4-6 milliamp trip level.

• Provides protection in 3 wire circuits.

• Mechanical trip indicator to show power “ON”.

• Rugged construction for long lasting durability.

• Grounded neutral — 4 ohms typical.

• Open neutral protection.

• Radio frequency interference suppression to protect against
nuisance tripping.

NEC/CEC Certifications and Compliances

• UL Listed: E165783

• CSA Approved

5002-0518 5002-0511 5002-0512 5002-0510

5002-0520

5002-0528

NEMA Configuration

Number Rating

Catalog
Number

GFCI cord set, 274 mm (11”) long 5-15P/R 15 Amp, 120 Vac 5002-0510

User attachable GFCI portable power plug 5-15P 15 Amp, 120 Vac 5002-0511

User attachable in-line GFCI, dual voltage — 15 - 20 Amp, 120 - 240 Vac 5002-0512

GFCI cord set, 1.83 m (6’) long with tri-tap receptacle 5-15P/R 15 Amp, 120 Vac 5002-0518

GFCI protected quad box 

5-20P/R 20 Amp, 120Vac 5002-0519

In-line GFCI with plug and receptacle attached 5-15P/R 15 Amp, 120 Vac 5002-0520

In-Line GFCI with plug and tri-tap molded power block attached 5-15P/R 15 Amp, 120 Vac 5002-0528

Dimensions in Inches/Millimeters

4.00

2.00

5002-0510

5002-0511

5002-0518

5002-0519

5002-0528 5002-0512 5002-0520

 2 of the 4 receptacles are T-slotted to allow both 15 and 20 amp tools, with either NEMA 5-15 or 5-20 plugs.

585