Appleton Contender™ Series Factory Sealed Control Stations and Pilot Lights Catalog Page
Contender™ Series Factory Sealed Control Stations and Pilot Lights
Controls: nEC/CEC Explosionproof Control stations and switChEs
© November 2016
Explosionproof, Dust-Ignitionproof
UNILETS™ for use with Threaded Metal Conduit. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1, Groups C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
Options
• 1- or 2-gang boxes:
— For aluminum cover only, add sufx - A.
— For aluminum body and cover, add sufx - SA.
• Three position selector switches with modied operation:
— Momentary contact right position, spring return to center;
maintained contact left position. Add sufx – S634.
— Momentary contact left position, spring return to center;
maintained contact right position. Add sufx – S635.
— Momentary contact right position, spring return to center;
maintained contact left position; alternate contacts. Add
sufx – S636.
• Selector switch lockout locks two or three position handle in any
position. Add sufx – S349.
• Momentary push button securing rod, add sufx – S153.
• Pilot light jewel/guard assembly. Order by sufxes if color
desired is other than red:
— Amber– J6
— Opal– J8
— Clear – J10
— Blue– J11
— Green– J3
• Bodies and covers (1- or 2-gang) in copperfree (4/10 of 1%
max.) aluminum. Add sufx – SA.
• Securing rod for push button lockout guard, add sufx– S153.
• LED pilot lights are available in lieu of incandescent pilot lights.
Order by sufxes for desired color as follows:
— Red– LED1
— Green– LED3
— Amber– LED6
NEC/CEC Certifications and Compliances
• UL Standards: UL 508, UL 698, UL 1203
• CSA Standards: C22.2 No. 14
• cULus Listed: E10449
Related Products
• For Division 1, Group B applications, refer to EFDB Series.
Illustrated Features
Securing Rod for Push Button
Lockout Guard – available as
optional item. Lockout Guard
furnished as standard with
the Push Button, may also be
padlocked. Suffix– S153.
SPBB factory sealed push button —
standard type and unit with dust cap.
SPBB Design Features
28
Contender™ Series Factory Sealed Control Stations and Pilot Lights
Controls: nEC/CEC Explosionproof Control stations and switChEs
© November 2016
Explosionproof, Dust-Ignitionproof
UNILETS™ for use with Threaded Metal Conduit. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1, Groups C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
Catalog Numbering Guide
EDS __ 1 2 524 J3 LNPRUNQ 1274 S634 SLNPJORQ
NEC Certified
EDS Series Box/
Hub Arrangement:
EDS - Dead-End
EDSC - Feed-Thru
EDKB - 1- 2
Device
Cover Only
EDKL - 3 Device
Cover Only
T - Tandem
L - Three Device
Full Catalog Number: EDSC12-524-J3-LNPUPQ-1274-S634-SLNPJORQ
Feed-Thru 2-Gang Box with 1/2” Hub:
In Gang #1: One Pilot Light with UP Nameplate
In Gang #2: One 3-Position, 4-Circuit Spring Return from the right Selector Switch with JOG-OFF-RUN Nameplate.
Options
Momentary Push Button Securing Rod S153
Selector Switch Lockout S349
Spring Return From Right Selector Switch (3 Positions Only) S634
Spring Return From Left Selector Switch (3 Positions Only) S635
Alternate Contacts Selector Switch S636
Change One Red Lens to Green Lens J3
Change One Red Lens to Opal Lens J8
Change One Red Lens to Amber Lens J6
Change One Red Lens to Blue Lens J11
Change One Red Lens to Clear Lens J10
Add 220/120 Vac Transformer (J1 Device Only) S801
Add 277/120 Vac Transformer (J1 Device Only) S802
Add 440/120 Vac Transformer (J1 Device Only) S803
Add 550/120 Vac Transformer (J1 Device Only) S804
Change One Red Pilot to Red LED LED1
Change One Red Lens to Green LED LED3
Change One Red Lens to Amber LED LED6
Add Red Mushroom Head to Momentary Push Button S805
Add Black Mushroom Head to Momentary Push Button S806
Add Green Mushroom Head to Momentary Push Button S807
Locking Guard for Maintained Push Button S808
Hub Size:
1 - 1/2”
2 - 3/4”
3 - 1”
1 - 1-Gang
2 - 2-Gang
Device for
first gang:
See Accessories
Options for
first gang:
See Options
Description Suffix
Special Nameplate
for first gang:
See Accessories
second gang:
See Accessories
Device for
Options for
second gang:
See Options
Special Nameplate
for second gang:
See Accessories
29
Contender™ Series Factory Sealed Control Stations and Pilot Lights
Controls: nEC/CEC Explosionproof Control stations and switChEs
© November 2016
Explosionproof, Dust-Ignitionproof
UNILETS™ for use with Threaded Metal Conduit. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1, Groups C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
Devices
Device Description
One Pilot Light (Red Standard) Y 524
Two Pilot Lights Y 561
One Pilot Light and One Momentary Push Button Y 473
One Pilot Light and Two Momentary Push Buttons Y Y 234
One Pilot Light and One Maintained Push Button Y 701
One Pilot Light and One Dust-Cap Push Button Y 702
One Pilot Light and One 12 Selector Switch (2 Position, 2 Circuit) Y 703
One Pilot Light and One 35 Selector Switch (2 Position, 4 Circuit) Y 704
One Pilot Light and One 102 Selector Switch (3 Position, 2 Circuit) Y 705
One Pilot Light and One 345 Selector Switch (3 Position, 4 Circuit) Y 706
One Monetary Push Button Y 84
Two Monetary Push Buttons Y 90
Two Side-By-Side Momentary Push Buttons Y 95
Three Monetary Push Buttons Y Y 707
One Momentary Push Button and One Maintained Push Button Y 708
One Momentary Push Button and One Dust Cap Push Button Y 709
One Momentary Push Button and One 12 Selector Switch (2 Position, 2 Circuit) Y 710
One Momentary Push Button and One 35 Selector Switch (2 Position, 4 Circuit) Y 711
One Momentary Push Button and One 102 Selector Switch (3 Position, 2 Circuit) Y 712
One Momentary Push Button and One 345 Selector Switch (3 Position, 4 Circuit) Y 713
One Maintained Push Button (Mushroom Head - Red) Y 714
Two Maintained Push Button Y 715
One Maintained and One Dust Cap Push Button Y 716
One Maintained Push Button and One 12 Selector Switch (2 Position, 2 Circuit) Y 717
One Maintained Push Button and One 35 Selector Switch (2 Position, 4 Circuit) Y 718
One Maintained Push Button and One 102 Selector Switch (3 Position, 2 Circuit) Y 719
One Maintained Push Button and One 345 Selector Switch (3 Position, 4 Circuit) Y 720
One Dust Cap Push Button Y 721
Two Dust Cap Push Buttons Y 722
One Dust Cap and One 12 Selector Switch (2 Position, 2 Circuit) Y 723
One Dust Cap and One 35 Selector Switch (2 Position, 4 Circuit) Y 724
One Dust Cap and One 102 Selector Switch (3 Position, 2 Circuit) Y 725
One Dust Cap and One 345 Selector Switch Y 726
One 12 Selector Switch (2 Position, 2 Circuit) Y 271
One 35 Selector Switch (2 Position, 4 Circuit) Y 272
One 102 Selector Switch (3 Position, 2 Circuit) Y 273
One 345 Selector Switch (3 Position, 4 Circuit) Y 274
120 Vac Photocell Y 727
277 Vac Photocell Y 728
Three Dust Cap Push Buttons Y 729
One Momentary and Two Maintained Push Buttons Y 730
Two Momentary and One Maintained Push Buttons Y Y 731
Three Maintained Push Buttons Y 732
Three Pilot Lights Y 476
Two Pilot Lights and One Momentary Push Button Y 733
One Pilot Light and Two Dust Cap Push Buttons Y 734
Two Pilot Lights and One Dust Cap Push Button Y 735
One Pilot Light and Two Maintained Push Buttons Y 736
Two Pilot Lights and One Maintained Push Button Y 737
Available in
1-G, 2-G Tandem
Available in
Three Device Suffix
30
Contender™ Series Factory Sealed Control Stations and Pilot Lights
Controls: nEC/CEC Explosionproof Control stations and switChEs
© November 2016
Explosionproof, Dust-Ignitionproof
UNILETS™ for use with Threaded Metal Conduit. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1, Groups C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
Nameplates
Description Suffix
Mushroom Head Push Buttons (Maintained and Momentary)
Start MNPSTQ
Stop MNPSPQ
Emergency Stop MNPESTPQ
Blank MNPBQ
Pilot Light Nameplates
Blank LNPBQ
Forward LNPFWDQ
Jog LNPJOGQ
Run LNPRUNQ
Stop LNPSPQ
Start LNPSTQ
Down LNPDOWNQ
Fast LNPFASTQ
Slow LNPSLOWQ
Raise LNPRAISEQ
Lower LNPLOWERQ
Reset LNPRESETQ
Off LNPOFFQ
On LNPONQ
Reverse LNPREVQ
Close LNPCLOSEQ
Open LNPOPENQ
Up LNPUPQ
Test LNPTESTQ
Low LNPLOWQ
High LNPHIGHQ
Two Position Selection Switch Nameplates
Forward-Reverse SLNPFRQ
Hand—Auto
On—Off SLNPOO
Start—Stop SLNPSS
Blank SLNPBQ
Up—Down SLNPUDQ
Run—Jog SLNPRJQ
Auto—Hand SLNPAHQ
Off—Remote SLNPORQ
Off—On SLNPOFON
SLNPHAQ
Three Position Selection Switch Nameplates
Forward—Off—Reverse SLNPFORQ
Hand—Off—Auto SLNPHOAQ
Run—Off—Jog SLNPROJQ
Blank SLNPB3
Reverse—Off—Forward SLNPROFQ
Auto—Off—Hand SLNPAOHQ
Hand—Off—Remote SLNPHORQ
1—Off—2 SLNP102Q
Jog—Off—Run SLNPJORQ
Stop—Run—Start SLNPSRSQ
Local—Off—Remote SLNPLORQ
Momentary Push Buttons
For Rectangular Weatherboot Style Only (not for round weatherboot style)
Blank
Forward SNPFWDQ
Jog SNPJOGQ
Run SNPRUNQ
Stop
Start
Down SNPDOWNQ
Fast SNPFASTQ
Slow SNPSLOWQ
Raise SNPRAISEQ
Lower SNPLOWERQ
Reset SNPRESETQ
Off SNPOFFQ
On SNPONQ
Reverse SNPREVQ
Close SNPCLOSEQ
Open SNPOPENQ
Up SNPUPQ
Test SNPTESTQ
Low SNPLOWQ
High SNPHIGHQ
Description Suffix
SNPBQ
SNPSPQ
SNPSTQ
Custom nameplates are not available.
Included as standard (no need to use suffix).
31
Contender™ Series Factory Sealed Control Stations and Pilot Lights
Controls: nEC/CEC Explosionproof Control stations and switChEs
© November 2016
Push Button Stations. Explosionproof, Dust-Ignitionproof
10 Amp, 600 Vac Max. for Heavy Duty Use Momentary Contact. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1, Groups C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
1-Gang
2-Gang
Hub Size
(Inches) Description
1/2
3/4 EDS2184 EDSC2184
1 EDS3184 EDSC3184
1/2
3/4 EDS2190 EDSC2190
1 EDS3190 EDSC3190
Red Mushroom Head — Maintained Contact — Emergency Stop Nameplate
1/2
3/4 EDS2714 EDSC2714
1 EDS3714 EDSC3714
1/2
3/4 EDS2284 EDSC2284
1 EDS3284 EDSC3284
1 Circuit
Universal
2 Circuits
Universal
1 Circuit
Universal
2 Circuit
Universal
Nameplate
Marking
Start/Stop
Start/Stop
Emergency Stop
Start/Stop
Catalog Number
Dead-End Feed-Thru
EDS1184 EDSC1184
EDS1190 EDSC1190
EDS1714 EDSC1714
EDS1284 EDSC1284
1/2
3/4 EDS2290 EDSC2290
1 EDS3290 EDSC3290
4 Circuits
Universal
Malleable Iron Body and Cover. For Aluminum Body and Cover, add suffix - SA.
32
EDS1290 EDSC1290
Start/Stop
Contender™ Series Factory Sealed Control Stations and Pilot Lights
Controls: nEC/CEC Explosionproof Control stations and switChEs
© November 2016
Combination Push Button and Pilot Light Stations. Explosionproof, Dust-Ignitionproof
10 Amp, 600 Vac Max. for Heavy Duty Use Momentary Contact. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1, Groups C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
1-Gang
2-Gang
1-Gang
Hub Size
(Inches) Description
1/2
3/4 EFS2524 EFSC2524
1 EFS3524 EFSC3524
1/2
3/4 EFS2561 EFSC2561
1 EFS3561 EFSC3561
1/2
3/4 EFS2624 EFSC2624
1 EFS3624 EFSC3624
1/2
3/4 EFS2661 EFSC2661
1 EFS3661 EFSC3661
1/2
3/4 EFD2473 EFDC2473
1 EFD3473 EFDC3473
One Pilot Light
Two Pilot Lights
Two Pilot Lights
Four Pilot Lights
1 Circuit
Universal and
1 Pilot Light
Nameplate
Marking
Specify
Catalog Number
Dead-End Feed-Thru
EFS1524 EFSC1524
EFS1561 EFSC1561
EFS1624 EFSC1624
— EFSC1661
EFD1473 EFDC1473
1/2
3/4 EFD2234 EFDC2234
1 EFD3234 EFDC3234
2-Gang
1/2
3/4 EFD2471 EFDC2471
1 EFD3471 EFDC3471
1/2
3/4 EFD2868 EFDC2868
1 EFD3868 EFDC3868
Malleable Iron Body and Cover. For Aluminum Body and Cover, add suffix - SA.
Pilot Lights furnished with 6 Watt, 120 Vac 6S6 lamp and Red Jewel - for other colors, add color suffix for each pilot light: Amber - J6, Blue - J11, Clear - J10,
Green - J3, Opal - J8.
2 Circuits
Universal and
1 Pilot Light
2 Circuits
Universal and
1 Pilot Light
2 Circuits
Universal and
2 Pilot Lights
Specify
Specify
EFD1234 EFDC1234
EFD1471 EFDC1471
EFD1868 EFDC1868
33
Contender™ Series Factory Sealed Control Stations and Pilot Lights
Controls: nEC/CEC Explosionproof Control stations and switChEs
© November 2016
Selector Switches. Explosionproof, Dust-Ignitionproof
10 Amp, 600 Vac Max. for Heavy Duty Use Momentary Contact. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1, Groups C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
Selector Switches
2 Position Selector Switches — 1-Gang — Maintained Contact
Nameplate: Hand—Auto
3 Position Selector Switches — 1-Gang — Maintained Contact
Nameplate: Hand—Off—Auto
EDKB Selector Switch Operator/Switch Assembly — Maintained Contact
Nameplate: Hand—Auto
Nameplate: Hand—Off—Auto
EDKB Selector Switch Operator/Switch Assembly — Modified Operations — 3 Position
2 Circuit
4 Circuit
Malleable Iron Body and Cover. For Aluminum Body and Cover, add suffix - SA.
For Aluminum Cover only, add suffix - A.
Supplied as standard with maintained contact selector switches. Specify catalog number from nameplate listings if other than standard nameplate is desired.
Hub Size
(Inches) Description
1/2
3/4 EDS21271 EDSC21271
1 EDS31271 EDSC31271
1/2
3/4 EDS21272 EDSC21272
1 EDS31272 EDSC31272
1/2
3/4 EDS21273 EDSC21273
1 EDS31273 EDSC31273
1/2
3/4 EDS21274 EDSC21274
1 EDS31274 EDSC31274
Thread Size
(In., NPSM) Description
2 Position
1/2
1/2
3 Position
1/2
1/2
Momentary contact right position. Spring return to center. Maintained contact left position.
Note: Standard legend plate reads Hand/Off/Auto
1/2
1/2
Momentary contact left position. Spring return to center. Maintained contact right position.
Note: Standard legend plate reads Auto/Off/Hand
1/2
1/2
Momentary contact right position. Spring return to center. Maintained contact left position.
Note: Standard legend plate reads Stop/Run/Start
1/2
2 Position,
2 Circuit
2 Position,
4 Circuits
3 Position,
2 Circuit
3 Position,
4 Circuits
2 Position,
2 Circuit
2 Position,
4 Circuits
3 Position,
2 Circuit
3 Position,
4 Circuit
3 Position,
2 Circuit
3 Position,
4 Circuits
3 Position,
2 Circuit
3 Position,
4 Circuits
3 Position,
4 Circuits
Left Center Right Dead-End Feed-Thru
Left Center Right Assembly Only Assembly w/Cover
Diagram Catalog Number
EDS11271 EDSC11271
None
EDS11272 EDSC11272
None
EDS11273 EDSC11273
EDS11274 EDSC11274
Diagram Switch Catalog Number
None SSBA1-2Q EDKB-12
None SSBA2-2Q EDKB-35
SSBA1-3Q EDKB-102
SSBA2-3Q EDKB-345
SSBAS-1-3 EDKB-102-S634
SSBAS-2-3 EDKB-345-S634
SSBASL-1-3 EDKB-102-S635
SSBASL-2-3 EDKB-345-S635
SSBASRA-2-3 EDKB-345-S636
34
Loading...