Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles
Explosionproof, Delayed Action
NEC:
Class I, Division 1 and 2, Groups C, D
Applications
• Locations where receptacles are used with stationary or
portable electrically operated devices such as:
— Lighting systems
— Conveyors
— Heaters
— Motor-generator sets
— Air conditioners
— Compressors
— Pumps
• Locations where damp or corrosive conditions exist.
• Meets all UL requirements for ground fault protection in
hazardous locations when GFCI cover is used.
Features
• Covers are UL Listed when used with Contender™ Series
mounting bodies.
• Plug mechanical cable clamps prevent strain on cables – they
meet or exceed UL strain relief pull-out requirements.
• Insulators provide superior dielectric and mechanical strength
and lowest arc tracking.
• Delayed action construction: insert plug partially rotate slide on
front of receptacle and insert plug fully.
• Factory sealed: external seals not required.
• Plug and receptacles are supplied with pressure terminal
connectors.
Standard Materials
• Cover: copperfree (4/10 of 1% max.) aluminum
• Mounting bodies: malleable iron
• Screws: captive hex head slotted, stainless steel
• Insulating blocks: berglass reinforced thermoset polyester
• Plug grommet: neoprene
Standard Finishes
• Malleable iron mounting bodies: triple-coat– (1) zinc
electroplate, (2) chromate and (3) epoxy powder coat
• Covers and aluminum mounting bodies: epoxy powder coat
Options
• Copperfree (4/10 of 1% max.) aluminum receptacle cover and
box. Add sufx –SA.
• U-Line™ Corrosion Resistance kit. Order ULINEREC4XKIT.
NEC/CEC Certifications and Compliances
• UL Standard: UL 1010 (UL 1203), UL 894
• UL Listed: E10784
CPS 20 Amp Factory Sealed Pin
Does not intermate with
and Sleeve Receptacles
Plugs and RecePtacles: nec/cec HazaRdous location
Note: Covers are UL Classified to mount on Crouse-Hinds EDS mounting bodies. Crouse-Hinds and ENP are registered trademarks of Cooper Crouse-Hinds.
© December 2018
415
Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles
Explosionproof, Delayed Action
NEC:
Class I, Division 1 and 2, Groups C, D
Single Gang
Dead-End Feed-Thru
Two Gang
Type Wire/Pole
Dead-End 2W, 3P
Feed-Thru 2W, 3P
Dead-End 2W, 3P
Feed-Thru 2W, 3P
CPS 20 Amp Factory Sealed Pin
Does not intermate with
and Sleeve Receptacles
Catalog Numbers
Hub Size
(Inches)
1/2 CPS152-101
3/4 CPS152-201
1 CPS152-301
1/2 CPS152-111
3/4 CPS152-211
1 CPS152-311
1/2 CPS152-102
3/4 CPS152-202
1 CPS152-302
1/2 CPS152-112
3/4 CPS152-212
1 CPS152-312
20 Amp 125-250 Vac
1HP, 20 Amp @ 18 Vdc
Receptacle with GFI
1/2 CPS152-102GFI
Dead-End 2W, 3P
Feed-Thru 2W, 3P
3/4 CPS152-202GFI
1 CPS152-302GFI
1/2 CPS152-112GFI
3/4 CPS152-212GFI
1 CPS152-312GFI
Plugs and RecePtacles: nec/cec HazaRdous location
Aluminum receptacle cover and malleable iron EDS box. For aluminum box and receptacle cover, add suffix –SA.
GFI units rated 20 Amp, 125 Vac.
Note: Appleton Contender CPS Receptacles UL Classified for use with Crouse-Hinds CPS plugs. Appleton covers are UL Classified to mount on Crouse-Hinds
EDS mounting bodies. Crouse-Hinds and ENP are registered trademarks of Cooper Crouse-Hinds.
416
© December 2018
Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles
Explosionproof, Delayed Action
NEC:
Class I, Division 1 and 2, Groups C, D
Cover Assemblies
CPS152R
GFS1
CPS 20 Amp Factory Sealed Pin
Does not intermate with
and Sleeve Receptacles
Catalog Numbers
Type Wire/Pole
Receptacle with Spring Cover Only CPS152R
GFCI Cover, 5 mA Trip Setting
Spring Cover Replacement Kit (Aluminum) CPSCA
20 Amp 125-250 Vac
1HP, 20 Amp @ 18 Vdc
GFS1
Plug
CPSCA
Plugs and RecePtacles: nec/cec HazaRdous location
Plug Cable
Diameter (Inches)
Pressure Terminals 2W, 3P 0.538 to 0.639 CPP516
Plug amperes match receptacle ratings
Aluminum receptacle cover and malleable iron EDS box. For aluminum box and receptacle cover, add suffix –SA.
GFI units rated 20 Amp, 125 Vac.
Note: Appleton CPP516 plug is UL Classified for use on Crouse-Hinds CPS receptacles. Appleton covers are UL Classified to mount on Crouse-Hinds EDS
mounting bodies. Crouse-Hinds and ENP are registered trademarks of Cooper Crouse-Hinds.
© December 2018
417
Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles
For Contender™ CPS 20 Amp Factory Sealed Receptacles and CPP Plugs. Mounting Boxes
NEC:
Class I, Division 1 and 2, Groups C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
EDS Cast Device Mounting Boxes
Dimensions in Millimeters (Inches) Catalog Number
A B C Malleable Iron Aluminum
Single Gang
Two Gang
Tandem
Type
Dead-End
Feed-Thru
Dead-End
Feed-Thru
Dead-End
Feed-Thru
Hub Size
(Inches)
1/2 153.9 (6.06) 172.9 (6.81) 19.0 (0.75) EDS171 EDS171-SA
3/4 153.9 (6.06) 172.9 (6.81) 22.3 (0.88) EDS271 EDS271-SA
1 156.7 (6.17) 178.5 (7.03) 25.4 (1.00) EDS371 EDS371-SA
1/2 153.9 (6.06) 172.9 (6.81) 19.0 (0.75) EDSC171 EDSC171-SA
3/4 153.9 (6.06) 172.9 (6.81) 22.3 (0.88) EDSC271 EDSC271-SA
1 156.7 (6.17) 178.5 (7.03) 25.4 (1.00) EDSC371 EDSC371-SA
1/2 153.9 (6.06) 172.9 (6.81) 22.3 (0.88) EDS172 EDS172-SA
3/4 153.9 (6.06) 172.9 (6.81) 22.3 (0.88) EDS272 EDS272-SA
1 156.7 (6.17) 178.5 (7.03) 25.4 (1.00) EDS372 EDS372-SA
1/2 153.9 (6.06) 172.9 (6.81) 22.3 (0.88) EDSC172 EDSC172-SA
3/4 153.9 (6.06) 172.9 (6.81) 22.3 (0.88) EDSC272 EDSC272-SA
1 156.7 (6.17) 178.5 (7.03) 25.4 (1.00) EDSC372 EDSC372-SA
1/2 287.2 (11.31) 307.0 (12.09) 22.3 (0.88) EDS147 EDS147-SA
3/4 287.2 (11.31) 307.0 (12.09) 22.3 (0.88) EDS247 EDS247-SA
1 290.5 (11.44) 312.6 (12.31) 25.4 (1.00) EDS347 EDS347-SA
1/2 287.2 (11.31) 307.0 (12.09) 22.3 (0.88) EDSC147 EDSC147-SA
3/4 287.2 (11.31) 307.0 (12.09) 22.3 (0.88) EDSC247 EDSC247-SA
1 290.5 (11.44) 312.6 (12.31) 25.4 (1.00) EDSC347 EDSC347-SA
Dimensions in Millimeters (Inches)
Single Gang Box Two Gang Box Single/Two Gang Box Side View Tandem
Ø 8.1 mm (0.32”)
88.9 mm
(3.50”)
149.3 mm
(5.88”)
159.2 mm
(5.09”)
33.2 mm
(1.31”)
182.6 mm
(7.19”)
149.3 mm
(5.88”)
60°
81.2 mm
(3.20”)
157.2 mm
(6.19”)
A
Plugs and RecePtacles: nec/cec HazaRdous location
B
66.8 mm
(2.63”)
For tandem bodies, external seals must be installed within 1.52 meters (5 feet) of each conduit entrance for Class I, Groups C and D.
77.7 mm
(3.06”)
88.9 mm
(3.50”)
C
418
© December 2018
Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles
Explosionproof, Delayed Action
NEC:
Class I, Division 1 and 2, Groups C, D
Dimensions in Millimeters (Inches)
GFS-1
Front View Side View
CPP Plug
CPS 20 Amp Factory Sealed Pin
Does not intermate with
and Sleeve Receptacles
Plugs and RecePtacles: nec/cec HazaRdous location
© December 2018
419
Loading...