Appleton CODE•MASTER™ JR. LED FACTORY SEALED LUMINAIRES Data Sheet
CODE•MASTER™ JR. LED FACTORY SEALED LUMINAIRES
FEATURES
• Fixtures operate safely in high ambient
temperatures: -40°C to +55°C (-40°F to +131°F)
for CJLL1 and CJLL2; -40°C to +40°C
(-40°F to +104°F) for CJLL3.
Nominal
Lumens
1,600 100W 50W CJLL1
3,000 300W 70-100W CJLL2
5,150 — 100-150W CJLL3
Incandescent
Equivalent
HID
Equivalent
Model
Number
• Acme double-lead threads speed installation
of xture into the mounting hood to make
electrical connection.
• The only wiring required is attaching two
wires to connection block in mounting hood.
Also allows safe, easy servicing without
disconnecting any wires.
• Heat- and impact-resistant globes have smooth
dust-resistant exterior.
• Optional guards protect globes from damage.
Secured to xture with three stainless steel
screws.
• Choice of mountings: pendant, ceiling, bracket
and stanchion.
• Fiberglass-reinforced polyester reectors, in
standard dome or 30° angle styles, are ideal
in installations where luminaire is subject to
exceptionally severe corrosive atmospheres.
• All threaded joints are ame-tight.
• Universal, high efcient drivers cover voltage
requirements for 120-277 Vac 50/60 Hz, 100 –
300 Vdc for CJLL1 and CJLL2; 120-277 Vac
50/60 Hz, 125 – 300 Vdc for CJLL3; 347-480 Vac
50/60 Hz for CJLL3.
SUITABLE LOCATIONS
• For use in chemical and petrochemical plants,
such as manufacturers of plastics, paints and
thinners, in reneries, and in other areas where
ignitable vapors, dust, moisture and corrosive
elements may be present.
• Suitable for outdoor saltwater locations and for
other wet locations.
STANDARD MATERIALS
• Fixture housing, mounting hoods and guards:
copperfree (4/10 of 1% max.) aluminum
• Globes: prismatic glass
• Reectors: berglass reinforced polyester
STANDARD FINISHES
• Fixture housing, guards and mounting hoods:
epoxy power coat nish, electrostatically
applied for complete, uniform corrosion
protection
OPTIONS
• Aluminum guard available, purchase separately
NEC/CEC RATINGS
• Class I, Division 1, Groups B, C, D
• Class II, Division 1, Groups E, F, G
• Class III
• Zone 1, Ex db IIB + H
2
NEMA 3R, 4X
• Suitable for use in Wet Locations
• Marine Outside Type (Salt Water)
NEC/CEC CERTIFICATIONS AND COMPLIANCES
• UL Standard: UL1598 (4th Ed.),
UL1598A (1st Ed.), UL8750 (2nd Ed.),
UL844 (13th Ed.)
• CSA Standard: CSA C22.2 No. 250.0-08,
CSA C22.2 No. 137-18, CSA C22.2 No. 60079-0,
and CSA C22.2 No 60079-1
• UL Listed: E10444
For Group B applications, a Group B rated mounting hood must be used.
ILLUSTRATED FEATURES
Aluminum heat sink with grey
epoxy powder coat,
electrostatically applied paint
that resists corrosion
Diecast aluminum heatsink
contributes to a reported L70
life of 60,000 hours
Heat and impact resistant glass
globe which has a smooth dust
resistance exterior but
prismatic nish to reduce glare
CODE•MASTER™ JR. LED FACTORY SEALED LUMINAIRES
Thermally conductive polymer
based potting compound
maintains low LED driver temperature ensuring a long life
Thermally conductive polymer
based potting compound
maintains low LED driver temperature ensuring a long life
MOUNTING HOODS
Ceiling Mount Pendant Mount Bracket 25° Stanchion
CATALOG ORDERING GUIDE
CJL A L1 2 C BU G
Series:
CJL – Code•Master Jr.
LED
Mounting Hood:
A – Pendant
W – Wall Bracket
C – Ceiling
S – 25° Stanchion
Blank – No Mounting Hood
Lumen Output
(nominal):
L1 – 1600
L2 - 3000
L3 - 5150
Hub Size:
2 - 3/4” NPT
3 - 1” NPT
4 - 1-1/4” or 1-1/2” NPT stanchion
Blank - No hub size needed if no
mounting hood
Color
Temperature:
C - Cool, 5000K
W - Warm, 3000K
Options:
G – Guard
Blank – No Guard
Voltage:
BU - 120-277 Vac,
50/60Hz; or
100-300 Vdc
BH - 347-480 Vac,
50/60H
Only for L1 and L2 models, 125–300 Vdc for L3 model.
Only for L3 models.
Loading...