Appleton CES Factory Sealed Receptacles, CESD Factory Sealed Receptacles Catalog Page

CES and CESD Factory Sealed Receptacles

30 and 60 Amp Pin and Sleeve. Explosionproof.

Delayed-Action Safety Construction with Slide-Lok® Design. Pressure Wire Terminals.

NEC/CEC — 30 Amp CES and CESD:
Class I, Division 1 and 2, Groups C, D

NEC/CEC — 60 Amp CESD:
Class I, Division 1 and 2, Groups D

Applications

• Locations where receptacles are used with stationary or
portable electrically operated devices such as:

— Lighting systems
— Conveyors
— Heaters
— Motor-generator sets
— Air conditioners
— Compressors
— Pumps

• Class I: classied locations such as:
— Petrochemical plants
— Petroleum reneries
— Paint and chemical plants
— Any location where ignitable vapors or gases are present

Features

• Factory sealed. No external seals required. Arcing is safely
conned to receptacle interior.

• Energized receptacle contacts deeply recessed to reduce
danger of accidental touching.

• Style 2 (shell and extra pole) grounding.

• Spring door keeps dust out of receptacle when plug is not in
use.

• Unique design brass contacts exert constant pressure along
entire contact surface and provide superior electrical contact.

• Contacts have beryllium copper wire springs.

• Plug mechanical cable clamps prevent strain on cables; they
meet or exceed UL strain relief pull-out requirements.

• Neoprene bushing compressed by cable collar prevents
entrance of water.

• Insulators provide superior dielectric and mechanical strength
and lowest arc tracking.

• Smooth, rounded integral bushing in each hub protects
conductor insulation.

• Delayed action construction. To operate, insert plug to rst stop,
move Slide-Lok® slide to right and push plug fully forward.

• CPH plug ts Powertite™ Series hazardous location
receptacles.

Standard Materials

• Receptacle and cover: copperfree (4/10 of 1% max.) aluminum

• Mounting box: malleable iron

• Insulating blocks: ber glass reinforced polyester

Standard Finishes

•  Malleable iron mounting bodies: triple-coat (1) zinc electroplate,
(2) chromate and (3) epoxy powder coat

• Aluminum receptacles: ceramic burnished

Plugs and RecePtacles: nec/cec HazaRdous location

• Cord connector housings and caps: epoxy powder coat

NEC/CEC Certifications and Compliances

• UL Standard: UL 1010 (UL 1203), UL 894, UL 1682, UL 1686

• UL Listed: E10784

• CSA Standard: C22. No 30, C22.2 No. 159, C22.2 No 182.1

• CSA Certied: 038644

422

CES and CESD Factory Sealed Receptacles

30 and 60 Amp Pin and Sleeve. Explosionproof

Delayed-Action Safety Construction with Slide-Lok® Design. Pressure Wire Terminals.

NEC/CEC — 30 Amp CES and CESD:
Class I, Division 1 and 2, Groups C, D

CES Receptacles — 30 Amp and 60 Amp, 125-250 Vac

Furnished with one vertical and two horizontal feed-thru hubs.

CES CESR

CESD Receptacles — 30 Amp and 60 Amp, 125-250 Vac

Furnished with vertical feed-thru hubs.

NEC/CEC — 60 Amp CESD:
Class I, Division 1 and 2, Groups D

Amp Wire/Pole

30

60

30

60

2W, 3P 3/4 CES-3023 CES-30B CESR-3023 CERI-3023

3W, 4P 3/4 CES-3034 CES-30B CESR-3034 CERI-3034

2W, 3P 1-1/4 CES-6023 CES-60B CESR-6023 CERI-6023

3W, 4P 1-1/4 CES-6034 CES-60B CESR-6034 CERI-6034

2W, 3P 3/4 CESD-3023 CESD-30B CESR-3023 CERI-3023

3W, 4P 3/4 CESD-3034 CESD-30B CESR-3034 CERI-3034

2W, 3P 1-1/4 CESD-6023 CESD-60B CESR-6023 CERI-6023

3W, 4P 1-1/4 CESD-6034 CESD-60B CESR-6034 CERI-6034

Hub Size

(Inches)

(See HP ratings below.)

(See HP ratings below.)

Complete With

Box 

Catalog Number

Back Box

Only

Receptacle

Only 

Replacement

Interior

Plugs and RecePtacles: nec/cec HazaRdous location

CESD CESR

CPH Plugs and Plug Interiors for Use with Receptacles Above

Amp Wire/Pole

30

CPH Plug

(30 and 60 Amp)

Pressure Terminals

CES/CESD Maximum Horsepower Ratings

Wire/Pole Phase Max. HP Max. Amp Catalog Number Wire/Pole Phase Max. HP Max. Amp Catalog Number

2W, 3P 1 1-1/2 30 CES/CESD-3023 2W, 3P 1 1/2 7 CES/CESD-3023

3W, 4P 3 3 30 CES/CESD-3034 3W, 4P 3 1 7 CES/CESD-3034

2W, 3P 1 1-1/2 60 CES/CESD-6023 2W, 3P 1 1-1/2 30 CES/CESD-6023

3W, 4P 3 5 60 CES/CESD-6034 3W, 4P 3 5 30 CES/CESD-6034

 UL Listed with Mounting Box.
 NOT UL Listed. Only UL Listed when Receptacle is provided with Mounting Box.
 480 Vac is certified by UL for NEC.
 600 Vac is certified by CSA for CEC.
 60 Amp CPH plugs with -BC suffix are NOT UL listed.

Interior

125-250 Vac 480-600 Vac

60 

2W, 3P .390-1.375 CPH3023BC CEPI-3023B

3W, 4P .390-1.375 CPH3034BC CEPI-3034B

2W, 3P .390-1.375 CPH6023BC CEPI-6023BC

3W, 4P .390-1.375 CPH6034BC CEPI-6034BC

Cable Dia.

(Inches) Complete Plug

Replacement

Interior

423