Appleton ATX™ SBDC Series Strobe Lighting and Static Triple Indicator Catalog Page

ATX™ SBDC Series Strobe Lighting and Static Triple Indicator

VISUAL SIGNAL: ATEX/IECEx FLAMEPROOF

© May 2016

Flameproof

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/68 - IK08

Applications

• For use in hazardous locations in a wide range of plants.

• In areas where audible signals cannot be heard.

• To warn of unsafe conditions and other communication needs.

Features

• Threaded access cover with O-ring seal.

• Supplied with two external xing lugs.

• Fixtures operate in any position.

• External earth terminal 1 x 4 mm2 (0.002 x 0.006 in2).

• Two side M20 threaded entries supplied with 1 x M20 blanking
plug.

• 15 Joules Strobe Beacon:

— Xenon lamp supplied.
— Instantaneous illuminance: 150,000 candelas.

— Strobe 45 ashes per minute.

— Operating factor: 10 min. stop after one hour operation.

— Life duration: 70% efciency after 8 million ashes.

— Internal red colored lens supplied as standard.

— Other lenses available in ve colors:

– Amber, blue, green, yellow and clear (factory installed).

— Connection to plug-in terminal block via 2 x 3 x 2.5 mm

(0.003 x 0.005 x 0.004 in2) terminal.

• Static Triple Indicator Unit:

— Ba15d lamp holders.
— Permissible lamps not supplied:

– 7 W incandescent or multi LED lamps.
— Operating factor 100%.
— Supplied with three colored interchangeable modules:

– Red, yellow and green.
— Each module is controlled separately.
— Possibility of coupling two modules for simultaneous

operation.
— Connection to plug-in terminal block via 2 x 5 x 2.5 mm2

(0.003 x 0.008 x 0.004 in2) terminal.

Standard Materials

• End caps and cover: anti-corrosive gray painted Zamak

• O-ring seal: Nitrile

• Sealed toughened glass.

• Fixing lug: zinc plated steel

• Protective guard: zinc plated steel

Options

• Other colored module for static triple indicator unit.

• Other lens colors available for strobe lighting

ATEX/IECEx Certifications and Compliances

2

EURASEC Certification

Other Certification

Related Products

Strobe Lighting Multiple Static Indicator

• Certication Type: FLd

— Gas: Zones 1 and 2

– Conforming to ATEX 94/9/CE: II 2 G
– Type of Protection: Ex d IIC
– Temperature Class: See T Rating (Gas) and Surface

Temperature (Dust) Table

— Dust: Zone 21 and 22

– Conforming to ATEX 94/9/CE: II 2 D
– Type of Protection: Ex tD A21
– Surface Temperature: See T Rating (Gas) and Surface

Temperature (Dust) Table

• Ambient Temperature: -40 °C to +55 °C (-40 °F to +131 °F)

• CE Declaration of Conformity: 50203

• ATEX Certicate: LCIE 97 ATEX 6012

• IECEx Certicate: IECEx LCI 04.0018

• Index of Protection according EN/IEC 60529: IP66/68
(10 meters)

• Impact Resistance (shock): IK08

• Internal Volume: ≤ 2 dm3 (122 in³) - 2 liters

• EURASEC N° TC RU C-FR.ГБ05.B.00912

• INMETRO Certicate: BVC11.0492 

• For labels see Labels for Emergency Lighting Units, ATX Self­Adhesive Signaling Labels for Emergency Lighting Units.

T Rating (Gas) and Surface Temperature (Dust) Table

Gas Dust

Ambient Temperature

Strobe 15 Joules T6 T5 T95 °C (T203 °F)

Static Indicator T6 T6 T80 °C (T176 °F)

 Inmetro certication available on special request only. Contact your local sales representative for more information.

Ta = +40 °C (+104 °F) Ta = +55 °C (+131 °F) Ta = +55 °C (+131 °F)

ATX™ SBDC Series Strobe Lighting and Static Triple Indicator

VISUAL SIGNAL: ATEX/IECEx FLAMEPROOF

© May 2016

Flameproof

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/68 - IK08

Catalog Numbering Guide

SBDC F R 15 02D

SBDC - SBDC Series

Zone 1 and 2 – 21 and 22
ATEX/IECEx Certified

Red Strobe Beacon

Series:

C - Clear
R - Red
A - Amber
G - Green
B - Blue
Y - Yellow
M - Red/Yellow/Green

Type:
S - Static
F - Flashing

Type Supply Rating (Amps)

15 joules 24 Vdc 18-30 V — 700 mA 6.8 (14.99) 31 (1891.7) SBDCFR1502D

15 joules 48 Vdc 40-60 V — 350 mA 6.8 (14.99) 31 (1891.7) SBDCFR1504D

15 joules 110 Vac 95-127 V 50/60 Hz 350 mA 6.8 (14.99) 31 (1891.7) SBDCFR1511A

15 joules 230 Vac 185-255 V 50/60 Hz 190 mA 6.8 (14.99) 31 (1891.7) SBDCFR1523A

Color:

Wattage/Joules:

15 - 15 Joules
LD - LED Lamp
07 - 7 W

Weight

kg (lb)

02D - 24 Vdc

Voltage:

02A - 24 Vac, 50/60 Hz
04D - 48 Vdc
04A - 48 Vac, 50/60 Hz
11A - 110 Vac, 50/60 Hz
23A - 230/240 Vac, 50/60 Hz

Volume

dm3 (in3) Catalog Number 

Triple Static Indicator

Type Lamp Holder Wattage

Red, yellow and green

230 Vac, 50/60 Hz

 For lens color other than Red on the IECEx certified product change the replace the letter R in the 5th position to the appropriate option: C for Clear, A for Amber,

G for Green, B for Blue or Y for Yellow. Example for clear lens: SBDCFC1502D.

 For LED lamp on the IECEx certified product change the replace the letters 15 or 07 with the letters LD in the 7th and 8th positions. Example: SBDCFRLD02D.

Ba15d 7 W 6.8 (14.99) 31 (1891.7) SBDCSM0723A

Weight
kg (lb)

Volume

3

dm

(in3) Catalog Number 

ATX™ SBDC Series Strobe Lighting and Static Triple Indicator

VISUAL SIGNAL: ATEX/IECEx FLAMEPROOF

© May 2016

Flameproof

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/68 - IK08

Accessories and Replacement Parts

Type

Mounting Brackets – Quick One Hand Fixings: Set of Two

Weight

kg (lb)

Volume

dm3 (in3) Catalog Number

Surface Mounting Brackets: Set of Two

Half Clamps – Set of Two – Zinc Plated Steel

42 mm (1.25") to 49 mm (1.5")

Protective Guard

Dimensions in Millimeters (Inches)

Zinc plated steel

FDFBZ

0.40 (0.88) 0.7 (42.7)

Stainless steel FDFBS

Zinc plated steel

FDSBZ

0.55 (1.21) 0.5 (30.5)

Stainless steel FDSBS

FDHC49Z

0.80 (1.76) 0.5 (30.5)

60 mm (2") FDHC60Z

Zinc plated steel 0.55 (1.21) 8.0 (488.2) FDPG1Z

77.5 (3.05)

150 (5.91)

12 (0.47)

Diameter

12

(0.47)

25 (0.98)

335 (13.19)

11 (0.43)

5

(0.47)

15 (0.59)

(3.50)

89

85

(3.15)

191 (7.52)

430 (16.93)