Appleton ATX™ FL Series Light Duty Nonmetallic Fluorescent Luminaires Catalog Page
™
ATX
FL Series Light Duty Nonmetallic Fluorescent Luminaires
Standard and Emergency Back-Up. Zone 2 and 22
ATEX:
Zone 2 and 22
II 3 GD
ATEX - IEC IP65/67
Applications
• Light duty luminaire ideal for commercial and light industrial
locations including hazardous areas designated as Zone 2 or
22 environments.
• Typical applications include oil reneries petrochemical
plants, pulp and paper mills, tunnels and other light duty
manufacturing locations.
Features
• Utilizes two 26 mm (T8) bi-pin uorescent lamps.
• Fiberglass reinforced polyester housing.
• Instant start 95% power factor ballast.
• Available in various lengths and wattages ranging from 18 to 58.
Pre-impregnated berglass reinforced white polyester housing.
• Closing system using stainless steel clips.
• Electrostatically applied white powder painted steel reector
provides optimal lighting distribution.
• Poured-in-place elastomer gasket secures IP65/67 ingress
protection.
Standard Material
• Fiberglass reinforced polyester (FRP) housing
• Polycarbonate lens
• White powder painted sheet steel reector
FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP
• Elastomer gasket
• Polycarbonate lampholders
• Mounting accessories available in different materials such
as gray painted aluminum, zinc plated steel, galvanized steel
or 316 stainless steel
Options
• Available in 3 hours emergency version, including multi-tap
ballast with built-in monthly self test. Test results through multicolored LED.
• Plug-in battery pack is easy to remove for maintenance.
• Battery voltage is 6 volts and 4 Ah capacity.
• One uorescent tube remains lit for up to 3 hours and up to
29% light intensity for 18 Watt, 15% for 36 Watt and 9% for 58
Watt.
• All emergency units supplied with cut off switch to battery when
xture is opened.
ATEX Certifications and Compliances
• Certication Type: EFn (Standard Version) / EFn-EM
(Emergency Version
• Gas: Zone 2
— Conforming to ATEX 94/9/CE:
— ATEX/IEC Protection: Ex nR II or Ex nA II
— T Rating: T4 for nA protection mode. (T3 for 2x58W Version)
See temperature chart for nR protection mode
• Dust: Zone 22
— Conforming to ATEX 94/9/CE: II 3 D
— Type of Protection: Ex tD A22
— Surface Temperature: (See table)
• Ambient Temperature: -20 °C to +55 °C (-4 °F to +131 °F)
• CE Declaration of Conformity: 50213/50219
• ATEX Certicate EFn (Standard Version): LCIE 08.6005X
• ATEX Certicate EFn-EM (Emergency Version): LCIE 08.6063X
• Index of Protection (solid and liquid): IP65 / 67
EURASEC Certification
• EURASEC N° TC RU C-FR.ГБ05.B.00912
II 3 G
2 x 58 W
2 x18 W
524
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2016
™
ATX
FL Series Light Duty Nonmetallic Fluorescent Luminaires
Standard and Emergency Back-Up. Zone 2 and 22
ATEX:
Zone 2 and 22
II 3 GD
ATEX - IEC IP65/67
Order using catalog numbering guide below or select catalog number from tables on following pages.
Catalog Numbering Guide For FL Non-Metallic Fluorescent Lighting Fixtures
FL B 1 18 BU P A C
FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP
Series:
FL - FL Series
Zone 2, 21 and 22
ATEX Certified
B - Bi-pin (G13)
Lamp Type:
Number of Lamps:
1 - Single
2 - Double
Wattage:
18 - 18 Watt
36 - 36 Watt
58 - 58 Watt
BU - 110 to 254 Vac/Vdc
Voltage:
50/60 Hz
BK - 220 to 240 Vac/Vdc
50/60 Hz
Mounting Version:
S - Surface/Suspension Mount
Standard Wiring
L - Surface/Suspension Mount
Dual Loop in/out Through
Wiring (single phase)
Cable Type:
A - Armored M20
Options:
(Options must be listed
alphabetically)
E - 3H Emergency
(combined) - Battery 6
V - 4 Ah
Temperature Chart
Dust Gas
Version
1 x 18 W
2 x 18 W T6 T5 T5
1 x 36 W
2 x 36 W T6 T6 T5
1 x 58 W
2 x 58 W T5 T5 T5
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2016
Surface
Temperature
75°C (167°F)
83°C (181°F)
91°C (196°F)
T Rating for Ta =
40° C (104° F)
T6 T6 T6
T6 T6 T5
T5 T5 T5
T Rating for Ta =
50°C (122°F)
T Rating for Ta =
55°C (131°F)
525
Loading...