Appleton ATX™ FE Series Nonmetallic Fluorescent Luminaires Catalog Page

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Applications

• Can be installed in hazardous areas designated as Zone 1 and
2 – 21 and 22.

• For use in locations where a high degree of corrosion resistance
is required.

• For indoor/outdoor use where protection against dirt, water and
moisture is necessary.

• Typical applications include oil reneries, petrochemical

facilities, pulp and paper mills, food processing plants,
warehouses, underground tunnels and general manufacturing
facilities.

Features

• Corrosion-resistant berglass reinforced polyester body and

hinged polycarbonate lens.

• High impact resistance housing (20 Joules – IK10) from -40 °C
to +55 °C (-40 °F to +131 °F) ambient temperature and wind

prole for use in extreme offshore and onshore environments.

• Latch assembly and elastomer gasket seals against water and
dust ingress, IP66/67.

• Easily accessed for maintenance using Allen key or straight
blade screwdriver.

• Central opening with unique patented release system to prevent
damage.

• Can be horizontally or vertically mounted.

• Hinged parabolic reector for high lumen output efciency.

• Vibration resistant spring loaded lampholders for bi-pin (G13) or
mono-pin (Fa6) versions.

• Positive safety switch disconnects power to lamps and ballast
to allow maintenance in hazardous locations.

• Electronic multi-tap ballast 110 to 254 Vac/Vdc +/- 10% 50/60
Hz, for global applications. High power factor electronic ballast
(>0.95). EOL (End Of Life) protection in accordance to the latest
EN/IEC 60079-7 standard.

• Two channel ballast prevents dark areas by allowing one lamp
to remain lit if one fails.

• Ballast plug-in with Ex e connector for quick and error-free
maintenance.

• Available in 3 hour or 90 minute emergency versions, including
multi-tap ballast with built-in monthly self test. Test results
through multi-colored LED.

• Ex e battery with plug-in connector.

Standard Materials

• Fiberglass reinforced polyester housing

• Polycarbonate lens

• Elastomer gasket

• Highly reective white polycarbonate internal reector

• Mounting accessories available in different materials such as
gray painted aluminum, zinc plated steel, galvanized steel or
316 stainless steel

Options

• Silicone coating for added protection in H2S hydrogen sulde
environments.

• ATEX/IEC version available without safety switch.

• Level gauge light tting.

• 316 stainless steel xing inserts.

2 x 58 W

2 x 36 W

2 x 18 W

ATEX/IECEx Certifications and Compliances

• Certication Type: FLe

— Gas: Zones 1 and 2:

– Conforming to ATEX 94/9/CE: II 2 G
– Type of Protection: Ex de IIC or Ex demb IIC (emergency

version)

– T-Rating: T5  to T4

— Dust: Zone 21 and 22:

– Conforming to ATEX 94/9/CE:
– Type of Protection: Ex t IIIC Db
– Surface Temperature: +75 °C (+167 °F)

• Ambient Temperature: -40 °C to +55 °C (-40 °F to +131 °F)

• CE Declaration of Conformity: 50201

• ATEX Certicate: LCIE 07 ATEX 6017

• IECEx Certicate: IECEx LCI 04.0017

• Index of Protection according EN/IEC 60529: IP66/67

• Impact Resistance (shock): IK10

II 2 D

EURASEC Certification

• EURASEC N° TC RU C-FR.ГБ05.B.00910

Other Certification

• INMETRO Certicate: BVC11.0276 

 Inmetro certication available on special request only. Contact your local sales representative for more information.
 With ceiling position use at +40 °C (+104 °F) ambient temperature.

551

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Order using catalog numbering guide below or select catalog number from tables on following pages.

Catalog Numbering Guide — FE Nonmetallic Fluorescent Lighting Fixtures

FE B 1 18 BU

Series:

FE - FE Series

Zone 1, 2, 21, 22
ATEX/IECEx
Certified

Wattage:
18 - 18 Watt
36 - 36 Watt
58 - 58 Watt

P

A C

Cable Type:
A - Armored M20
N - Unarmored M25
U - Unarmored M20

Lamp Type:
B - Bi-pin (G13)
M - Mono Pin (Fa6)

Number of Lamps:

1 - Single
2 - Double
3 - Three Lamps

Voltage:

BU - 110 to 254 Vac/

Vdc, 50/60 Hz

P - Pole Mount 
S - Surface/Suspension

Mount Standard Wiring

T - Surface/Suspension

Mount Through Wiring

L - Surface/Suspension

Mount Dual Loop in/out
Through Wiring (single
phase)

(options must be listed

Options:

alphabetically)

C - Silicon Coating for

Diffuser

E - 3 Hour Emergency

Battery:
6 V - 4 Ah (18W)
6 V - 7 Ah (36W, 58W)

E9 - 90 Minute Emergency

Battery:
6 V - 4 Ah (18W)
6 V - 7 Ah (36W, 58W)

L - Level Gauge Light Fitting



N - No Switch 
X - 4 Entries 

Mounting Version:

 Only for single standard versions.
 Only for standard versions.
 Only for S, T and L mounting versions.
 Only 2 x 18 W and 2 x 36 W with M25 entry versions.

552

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Surface/Suspension Mounting and Standard Wiring Version

Connection via 1 x 6 terminals.
Capacity (flexible/solid): 4 mm2/6 mm2
(0.0062 in2/0.0093 in2) — 10/8 AWG.

Unarmored Version - Bi-pin (G13)

Three M25 threaded entries, two at one end and one at opposite end, supplied with one M25 polyamide cable gland —
8 to 18.5 mm (0.31 to 0.73") diameter — and two M25 polyamide plugs.

Number

of Lamps

1 18 G13 110/254 5.5 (12.13) 32.3 (1971.07) FEB118BUSN

2 18 G13 110/254 5.5 (12.13) 32.3 (1971.07) FEB218BUSN

1 36 G13 110/254 7.9 (17.42) 54.2 (3307.49) FEB136BUSN

2 36 G13 110/254 7.9 (17.42) 54.2 (3307.49) FEB236BUSN

3 36 G13 110/254 9.9 (21.83) 54.2 (3307.49) FEB336BUSN

1 58 G13 110/254 9.0 (19.84) 65.0 (3966.54) FEB158BUSN

2 58 G13 110/254 9.0 (19.84) 65.0 (3966.54) FEB258BUSN

3 58 G13 110/254 11.0 (24.30) 65.0 (3966.54) FEB358BUSN

Armored Version - Bi-pin (G13)

Two M20 threaded entries with brass earth continuity plate at one end and one M20 plugged clearance entry, supplied
with two M20 polyamide plugs.

Number

of Lamps

1 18 G13 110/254 5.5 (12.13) 32.3 (1971.07) FEB118BUSA

2 18 G13 110/254 5.5 (12.13) 32.3 (1971.07) FEB218BUSA

1 36 G13 110/254 7.9 (17.42) 54.2 (3307.49) FEB136BUSA

2 36 G13 110/254 7.9 (17.42) 54.2 (3307.49) FEB236BUSA

3 36 G13 110/254 9.9 (21.83) 54.2 (3307.49) FEB336BUSA

1 58 G13 110/254 9.0 (19.84) 65.0 (3966.54) FEB158BUSA

2 58 G13 110/254 9.0 (19.84) 65.0 (3966.54) FEB258BUSA

3 58 G13 110/254 11.0 (24.30) 65.0 (3966.54) FEB358BUSA

Power

(W)

Power

(W)

Lamp

Type

Lamp

Type

Voltage

(V)

Voltage

(V)

Weight

kg (lbs)

Weight

kg (lbs)

Volume

3

dm

(in3)

Volume

3

dm

(in3)

Catalog Number

Catalog Number

553

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Surface/Suspension Mounting and Through Wiring Version (three phase)

Connection via 2 x 5 terminals.
Capacity (flexible/solid): 4 mm2/6 mm2 (0.0062 in2/0.0093 in2) — 10/8 AWG.

Unarmored Version - Bi-pin (G13)

Three M25 threaded entries, two at one end and one at opposite end, supplied with two M25 polyamide cable glands
— 8 to 18.5 mm (0.31 to 0.73") diameter — and one M25 polyamide plug.

Number

of Lamps

2 18 G13 110/254 5.5 (12.13) 32.3 (1971.07) FEB218BUTN

2 36 G13 110/254 7.9 (17.42) 54.2 (3307.49) FEB236BUTN

2 58 G13 110/254 9.0 (19.84) 65.0 (3966.54) FEB258BUTN

Armored Version - Bi-pin (G13)

Two M20 threaded entries with brass earth continuity plate at one end and one M20 threaded entry with brass earth
continuity plate at opposite end, supplied with one M20 polyamide plug.

Power

(W)

Lamp

Type

Voltage

(V)

Weight

kg (lbs)

Volume

dm3 (in3) Catalog Number

Number

of Lamps

2 18 G13 110/254 5.5 (12.13) 32.3 (1971.07) FEB218BUTA

2 36 G13 110/254 7.9 (17.42) 54.2 (3307.49) FEB236BUTA

2 58 G13 110/254 9.0 (19.84) 65.0 (3966.54) FEB258BUTA

Surface/Suspension Mounting and Dual Loop In/Out Through Wiring
Version (single phase):

Connection via 1 x 6 terminals and 1 x 3 terminals.
Capacity (flexible/solid): 4 mm

Unarmored Version - Bi-pin (G13)

Three M25 entries, two at one end and one at opposite end, supplied with two M25 polyamide cable glands — 8 to

18.5 mm (0.31 to 0.73") diameter — and one M25 polyamide plug.

Number

of Lamps

2 18 G13 110/254 5.5 (12.13) 32.3 (1971.07) FEB218BULN

2 36 G13 110/254 7.9 (17.42) 54.2 (3307.49) FEB236BULN

2 58 G13 110/254 9.0 (19.84) 65.0 (3966.54) FEB258BULN

Armored Version - Bi-pin (G13)

Two M20 threaded entries with brass earth continuity plate at one end and one M20 threaded entry with brass earth
continuity plate at opposite end, supplied with one M20 polyamide plug.

Number

of Lamps

2 18 G13 110/254 5.5 (12.13) 32.3 (1971.07) FEB218BULA

2 36 G13 110/254 7.9 (17.42) 54.2 (3307.49) FEB236BULA

2 58 G13 110/254 9.0 (19.84) 65.0 (3966.54) FEB258BULA

Power

(W)

2

/6 mm2 (0.0062 in2/0.0093 in2) — 10/8 AWG.

Power

(W)

Power

(W)

Lamp

Type

Lamp

Type

Lamp

Type

Voltage

(V)

Voltage

(V)

Voltage

(V)

Weight

kg (lbs)

Weight

kg (lbs)

Weight

kg (lbs)

dm

dm3 (in3) Catalog Number

dm

Volume

3

(in3) Catalog Number

Volume

Volume

3

(in3) Catalog Number

554

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Pole Mounting Version

Connection via 1 x 3 terminals.
Capacity (flexible/solid): 4 mm2/6 mm2 (0.0062 in2/0.0093 in2) — 10/8 AWG.
For mounting on 42 mm (1.65") diameter pole or tubular wall-mounting
support, supplied with one integrated M25 polyamide cable gland — 8 to 18.5
mm (0.31 to 0.73") diameter.

Number

of Lamps

2 18 G13 110/254 6.2 (13.67) 34.1 (2080.91) FEB218BUPN

2 36 G13 110/254 8.7 (19.18) 54.2 (3307.49) FEB236BUPN

Level Gauge Tank Light -
Surface/Suspension Mounting with Standard Wiring

Connection via 1 x 6 terminals.
Capacity (flexible/solid): 4 mm
AWG.

Unarmored Version - Bi-pin (G13)

Three M25 entries, two at one end and one at opposite end, supplied with one M25 polyamide cable gland — 8 to 18.5
mm (0.31 to 0.73") diameter — and two M25 polyamide plugs.

Number

of Lamps

1 18 G13 110/254 5.5 (12.13) 32.3 (1971.07) FEB118BUSNL

1 36 G13 110/254 7.9 (17.42) 54.2 (3307.49) FEB136BUSNL

1 58 G13 110/254 9.0 (19.84) 65.0 (3966.54) FEB158BUSNL

Power

(W)

2

/6 mm2 (0.0062 in2/0.0093 in2) — 10/8

Power

(W)

Lamp

Type

Lamp

Type

Voltage

(V)

Voltage

(V)

Weight

kg (lbs)

Weight

kg (lbs)

Volume

dm3 (in3) Catalog Number

Volume

dm3 (in3) Catalog Number

555

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Emergency Battery Backup

Surface/Suspension Mounting and Standard Wiring

Connection via 1 x 4 terminals for 18 W version.
Connection via 1 x 8 terminals for 36 W and 58 W
versions. Capacity (flexible/solid): 4 mm
(0.0062 in2/0.0093 in2) — 10/8 AWG.

Unarmored Version - Bi-pin (G13)

Three M25 entries, two at one end and
one at opposite end, supplied with one M25
polyamide cable gland — 8 to 18.5 mm (0.31 to 0.73")
diameter — and two M25 polyamide plugs.

2

/6 mm2

Number

of Lamps

Armored Version - Bi-pin (G13)

Two M20 threaded entries with brass earth continuity plate at one end and one M20 plugged clearance
entry, supplied with two M20 polyamide plugs.

Number

of Lamps

Power

(W)

2 18 G13 110/254 7.3 (16.09) 32.3 (1971.07) 3 H 4Ah FEB218BUSNE

2 36 G13 110/254 9.6 (21.16) 54.2 (3307.49) 3 H 7Ah FEB236BUSNE

3 36 G13 110/254 11.6 (25.57) 54.2 (3307.49) 3 H 7Ah FEB336BUSNE

2 58 G13 110/254 10.7 (23.59) 65.0 (3966.54) 3 H 7Ah FEB258BUSNE

3 58 G13 110/254 12.7 (28.00) 65.0 (3966.54) 3 H 7Ah FEB358BUSNE

Power

(W)

2 18 G13 110/254 7.3 (16.09) 32.3 (1971.07) 3 H 4Ah FEB218BUSAE

2 36 G13 110/254 9.6 (21.16) 54.2 (3307.49) 3 H 7Ah FEB236BUSAE

3 36 G13 110/254 11.6 (25.57) 54.2 (3307.49) 3 H 7Ah FEB336BUSAE

2 58 G13 110/254 10.7 (23.59) 65.0 (3966.54) 3 H 7Ah FEB258BUSAE

3 58 G13 110/254 12.7 (28.00) 65.0 (3966.54) 3 H 7Ah FEB358BUSAE

Lamp

Type

Lamp

Type

Voltage

(V)

Voltage

(V)

Weight

kg (lbs)

Weight

kg (lbs)

Volume

dm3 (in3)

Volume

3

(in3)

dm

Duration

(Hours)

Duration

(Hours)

Battery

Capacity Catalog Number

Battery

Capacity Catalog Number

556

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Emergency Battery Backup

Surface/Suspension Mounting and Through Wiring Version

Connection via 2 x 4 terminals.
Capacity (flexible/solid): 4 mm
AWG.

Unarmored Version - Bi-pin (G13):

Three M25 entries, two at one end and one at opposite end, supplied
with two M25 polyamide cable glands — 8 to 18.5 mm (0.31 to 0.73") diameter — ­and one M25 polyamide plug.

Number

of Lamps

Armored Version - Bi-pin (G13):

Two M20 threaded entries with brass earth continuity plate at one end and one M20 threaded entry with
brass earth continuity plate at opposite end, supplied with one M20 polyamide plug.

Number

of Lamps

Power

(W)

2 18 Bi-pin 110/254 7.3 (16.09) 32.3 (1971.07) 3 H 4Ah FEB218BUTNE

2 36 Bi-pin 110/254 9.6 (21.16) 54.2 (3307.49) 3 H 7Ah FEB236BUTNE

2 58 Bi-pin 110/254 10.7 (23.59) 65.0 (3966.54) 3 H 7Ah FEB258BUTNE

Power

(W)

2 18 Bi-pin 110/254 7.3 (16.09) 32.3 (1971.07) 3 H 4Ah FEB218BUTAE

2 36 Bi-pin 110/254 9.6 (21.16) 54.2 (3307.49) 3 H 7Ah FEB236BUTAE

2 58 Bi-pin 110/254 10.7 (23.59) 65.0 (3966.54) 3 H 7Ah FEB258BUTAE

Lamp

Lamp

Type

Type

2

/6 mm2 (0.0062 in2/0.0093 in2) — 10/8

Voltage

(V)

Voltage

(V)

Weight

kg (lbs)

Weight

kg (lbs)

Volume

dm3 (in3)

Volume

3

dm

(in3)

Duration

(Hours)

Duration

(Hours)

Battery

Capacity Catalog Number

Battery

Capacity Catalog Number

557

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Emergency Battery Backup

Surface/Suspension Mounting and Dual Loop
In/Out Through Wiring Version (single phase)

Connection via 1 x 4 double deck terminals for
18 W version.
Connection via 1 x 8 terminals and 1 x 4 terminals for
36 W and 58 W versions.
Capacity (flexible/solid): 4 mm
in2/0.0093 in2) — 10/8 AWG.

Unarmored Version - Bi-pin (G13)

Three M25 entries, two at one end and one at opposite
end, supplied with two M25 polyamide cable glands —
8 to 18.5 mm (0.31 to 0.73") diameter — and one M25
polyamide plug.

Number

of Lamps

Power

(W)

2 18 Bi-pin 110/254 7.6 (16.76) 32.3 (1971.07) 3 H 4Ah FEB218BULNE

2 36 Bi-pin 110/254 9.9 (21.83) 54.2 (3307.49) 3 H 7Ah FEB236BULNE

2 58 Bi-pin 110/254 10.7 (23.59) 65.0 (3966.54) 3 H 7Ah FEB258BULNE

Lamp

Type

2

/6 mm2 (0.0062

Voltage

(V)

Weight

kg (lbs)

Volume

3

(in3)

dm

or

18 W

Duration

(Hours)

36/58 W

Battery

Capacity Catalog Number

Armored Version - Bi-pin (G13)

Two M20 threaded entries with brass earth continuity plate at one end and one M20 threaded entry
with brass earth continuity plate at opposite end, supplied with one M20 polyamide plug.

Number

of Lamps

Pole Mounting Version

Connection via 1 x 4 terminals.
Capacity (flexible/solid): 4 mm
mm2 (0.0062 in2/0.0093 in2) —
10/8 AWG.

For mounting on diameter 42 mm pole or tubular wall-mounting support, supplied with one X M25
polyamide cable gland — 8 to 18.5 mm (0.31 to 0.73") diameter.

Number

of Lamps

Power

(W)

2 18 Bi-pin 110/254 7.6 (16.76) 32.3 (1971.07) 3 H 4Ah FEB218BULAE

2 36 Bi-pin 110/254 9.9 (21.83) 54.2 (3307.49) 3 H 7Ah FEB236BULAE

2 58 Bi-pin 110/254 10.7 (23.59) 65.0 (3966.54) 3 H 7Ah FEB258BULAE

Power

(W)

2 18 Bi-pin 110/254 10.0 (22.05) 54.2 (3307.49) 3 H 4Ah

2 36 Bi-pin 110/254 10.4 (22.93) 54.2 (3307.49) 3 H 7Ah FEB236BUPNE

Lamp

Type

Lamp

Type

2

/6

Voltage

(V)

Voltage

(V)

Weight

kg (lbs)

18 W - Actual Size 0.6 m (2') 36 W - Actual Size 1.2 m (4')

Weight

kg (lbs)

Volume

3

dm

(in3)

Volume

3

dm

(in3)

Duration

(Hours)

Duration

(Hours)

Battery

Capacity Catalog Number

Battery

Capacity Catalog Number

FEB218BUPNE 

 2 x 18 W is supplied with external battery pack (see dimensional data).

558

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Accessories and Replacement Parts

Fixing Brackets

Brackets for Surface Mounting

M8 Ring Bolts

Half Clamps Brackets for Pole Mounting

Wall Mounting Adaptor

Hinged Brackets

Fall Prevention Kit

Adaptor for Fa8 Tube on Fa6 Lampholder

Description Catalog Number

Set of two brackets for surface installation

Zinc plated steel FEFBZ

Set of two

316 stainless steel FESBS

Set of two

Zinc plated steel FERBM8Z

Set of two

Diameter for 1-1/4 to 1-1/2" pole: 42 mm (16.65 in) to 49 mm (1.93 in)

Zinc plated steel FEHC49Z

316 stainless steel FEHC49S

Diameter for 2" pole: 60 mm (2.36 in)

Zinc plated steel FEHC60Z

316 stainless steel FEHC60S

For pole mounting version

Diameter for 2" pole: 60 mm (2.36 in)

Galvanized steel FEWMG

Set of two brackets for adjusting luminaire

Aluminium FEHBA

316 stainless steel FEHBS

Safety chain retains fixture temporarily to ease installation

For M25 cable entry FESCM25

For M20 cable entry FESCM20

096905

559

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Wiring Diagram Emergency Function Diagram

Two Lamp Version

Mains

PE N L

Lighting
Switch

L’

Mains Lighting Switch ON Lighting Switch OFF

ON

LED Status

U

Standard Fluorescent

N

Lighting Fixture

PE

U’

Emergency Fluorescent

U

Lighting Fixture

N
PE

Color Indication Function

Green

Red

Yellow

None (Off) No Light Emitted No mains — Battery completely empty

LED Blinking Mains good – Battery quick charging

LED Continuous Mains good – Battery trickle charging

LED Blinking No battery connected OR Something is defective

LED Continuous Mains faulty — Output ON

LED Flashing Mains faulty — Battery empty OR Lamp is defective

LED Blinking Mains good — Performing self test

LED Continuous Self test was not okay

OFF

Three Lamp Version

Mains Lighting Switch ON Lighting Switch OFF

ON

OFF

Emergency Light Duration

Version Battery Capacity Duration Light Output

2 x 18 W

2 x 36 W

2 x 58 W

560

4 Ah – 6 V 90 minute 80%

4 Ah – 6 V 3 hour 40%

7 Ah – 6 V 90 minute 45%

7 Ah – 6 V 3 hour 25%

7 Ah – 6 V 90 minute 30%

7 Ah – 6 V 3 hour 15%

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Dimensions in Millimeters (Inches)

18 Watt 36 Watt

400.0 mm
(15.75")

785.0 mm (30.91")

Ø 42.0 mm

(1.65")

50.0 mm
(1.99")

258.8 mm

258.8

(10.19")

Surface/Suspension Mounting

2 X MB

700.0 mm (27.56")

1390.0 mm (54.72")

58 Watt End View

700.0 mm (27.56")

1690.0 mm (66.54")

2 X MB

Pole Mounting

18 Watt End View

785.0 mm (30.91")

217.0 mm
(8.54")

218.0 mm
(8.58”)

2 X MB

145.0 mm
(5.71")

145.0 mm
(5.71")

50.0 mm
(1.99")

Ø 42.0 mm

(1.65")

50.0 mm
(1.99")

258.8 mm
(10.19")

36 Watt

1390.0 mm (54.72")

Emergency Pole Mounting

18 Watt End View

91.0 mm
(3.58")

785.0 mm (30.91")

1000.0 mm (39.37")

120.0 mm
(4.72")

218.0 mm
(8.58”)

145.0 mm
(5.71")

561

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Mounting Data

FEFBZ: zinc plated steel — Set of two quick fixing brackets for ease of surface mounting

30 mm

(1.18")

9.0 mm
(0.35")

9.0 mm
(0.16")

25.0 mm (0.98")

49.0 mm (1.93")

8.5

(2.52")

64 mm

(0.33")

8.5 mm

FESBS: 316 stainless steel — Set of two brackets for surface mounting

FERBM8Z: zinc plated steel — Set of two ring bolts

(1.50")

38.0 mm

(0.51")

13.0 mm

9.5

(0.37")

9.5 mm

36.0 mm

15.0 mm

(1.42")

(0.59")

232 mm (9.13")

200 mm (7.87")

14.5 mm (0.57")

14.5

M8x31.8 mm

M 8 x 1.25

(1.25")

20.0 mm
(0.79")

8.0 mm
(0.31")

32.0 mm
(1.26")

562

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Mounting Data

FEHC49Z: zinc plated steel or FEHC49S: 316 stainless steel — Set of two clamps for pole diameter 42 mm to 49 mm (for 1-1/4” to 1-1/2" pole).
FEHC60Z: zinc plated steel or FEHC60S: 316 stainless steel — Set of two clamps for pole diameter 60 mm (for 2” pole).

95 for 31.8 mm (1.25")

or 38.1 mm (1.50")

75.0 mm
(2.95”)

14.0 mm
(0.55”)

85 mm

(3.31”)

14.0 mm
(0.55”)

31.8 mm (1.25")

or 38.1 mm (1.50")

Ø 60 mm

(2.36”)

50.8 mm
(2.00")

or 84 for 50.8 mm (2.00")

FEWMG: galvanized steel — Wall mounting pole diameter 42 mm (1-1/4”)

152.0 mm (5.98”)

(0.47”)

140.0 mm (5.51”)

128.0 mm (5.04”)
Ø 20.0 mm

(0.79”)

5.0 mm (0.20”)

75.0 mm (2.95”)

42.0 mm

(1.65”)

12.0 mm

430.0 mm (16.92”)

FEHBA: aluminum or FEHBS: 316 stainless steel — Set of two hinged brackets for adjusting luminaire.

5.5 mm
(0.22”)

77.0 mm

(3.03”)

41.0 mm
(1.61”)

82.0 mm
(3.23”)

M8x31.8 mm

(0.51”)

30°

30°

(1.25")

60

30

90

0

30

60

90

13.0 mm

32.0 mm

100.0 mm

(3.94”)

9.5 mm
(0.37”)

Ø 10.5 mm

(0.41”)

(1.26”)

14.5 mm
(0.57”)

18.0 mm
(0.71”)

132 mm (5.20”)

563

™

FLUORESCENT/AREA: ATEX/IECEx STANDARD AND EMERGENCY BACK-UP

© May 2016

ATX

FE Series Nonmetallic Fluorescent Luminaires

Standard and Emergency Battery Back-Up. Increased Safety

ATEX/IECEx:

Zone 1 and 2 - 21 and 22

II 2 GD

IP66/67 – IK10

Photometric Data

Polar curves for a 1000 lm flux, according to NF C 71-120
Luminaire symbol according to NF C 71-121

1 x 18 Watt
TOTAL LUMINAIRE EFFICIENCY = 94.8%
NF C 71-121: 0.86 H + 0.09 T

CANDELA DISTRIBUTION CANDELA DISTRIBUTION CANDELA DISTRIBUTION

0-180 90-270

0 215 215 0 205 205 0 198 198

5 214 214 5 204 203 5 197 197
10 211 215 10 202 203 10 194 198
15 207 213 15 197 202 15 190 197
20 200 211 20 191 201 20 184 195
25 191 209 25 182 201 25 176 194
30 181 208 30 173 200 30 166 193
35 169 202 35 161 192 35 155 187
40 155 196 40 148 183 40 142 180
45 139 187 45 133 177 45 128 174
50 122 181 50 117 173 50 113 170
55 103 175 55 99 168 55 96 167
60 83 174 60 80 168 60 78 163
65 62 173 65 61 163 65 59 157
70 42 165 70 41 154 70 41 151

0° 15°

90°

75°

60°

45°

30°

1 x 36 W

Efficiency 89.3%
NF C 71-121: 0.81 H + 0.08 T

0-180 90-270

0° 15°

90°

75°

60°

45°

30°

1 x 58 W

Efficiency 87.5%
NF C 71-121: 0.80 H + 0.07 T

0-180 90-270

Longitudinal
Transverse

0° 15°

90°

75°

60°

45°

30°

2 x 18 W

Efficiency 85.1%
NF C 71-121: 0.78 H + 0.08 T

CANDELA DISTRIBUTION CANDELA DISTRIBUTION CANDELA DISTRIBUTION

0-180 90-270

0 195 195 0 185 185 0 173 173

5 195 194 5 185 184 5 172 173
10 192 192 10 182 182 10 170 171
15 187 192 15 178 181 15 166 169
20 181 193 20 172 183 20 161 172
25 173 194 25 164 183 25 154 172
30 163 194 30 154 183 30 145 172
35 152 193 35 143 183 35 135 171
40 138 192 40 131 183 40 123 172
45 124 191 45 117 179 45 111 170
50 108 183 50 102 173 50 97 165
55 91 176 55 85 166 55 82 157
60 73 163 60 68 155 60 66 148
65 55 150 65 51 145 65 50 139
70 37 145 70 35 141 70 34 133

3 x 18 W

Efficiency 68.1%
NF C 71-121: 0.63 G + 0.05 T

CANDELA DISTRIBUTION CANDELA DISTRIBUTION CANDELA DISTRIBUTION

0-180 90-270

0 173 173 0 174 174 0 170 170

5 172 172 5 174 174 5 170 170
10 169 170 10 171 173 10 167 168
15 135 169 15 167 171 15 163 169
20 160 169 20 162 171 20 158 167
25 153 168 25 155 170 25 151 167
30 144 167 30 146 168 30 143 163
35 135 162 35 136 163 35 133 159
40 123 158 40 125 159 40 122 155
45 110 153 45 112 153 45 109 149
50 96 146 50 98 145 50 95 140
55 82 136 55 83 135 55 81 129
60 66 123 60 67 123 60 65 116
65 50 111 65 51 110 65 49 105
70 34 100 70 35 100 70 33 96

0° 15°

0° 15°

90°

75°

60°

45°

30°

90°

75°

60°

45°

30°

2 x 36 W

Efficiency 80.5%
NF C 71-121: 0.73 H + 0.07 T

0-180 90-270

3 x 36 W

Efficiency 68.1%
NF C 71-121: 0.63 G + 0.07 T

0-180 90-270

0° 15°

0° 15°

90°

75°

60°

45°

30°

90°

75°

60°

45°

30°

2 x 58 W

Efficiency 76.9%
NF C 71-121: 0.70 H + 0.07 T

0-180 90-270

3 x 58 W

Efficiency 65.6%
NF C 71-121: 0.61 H + 0.04 T

0-180 90-270

90°

75°

60°

45°

30°

0° 15°

90°

75°

60°

45°

30°

0° 15°

564