120-277 V, 120 V, 277 V, 347 V, 50/60 Hz. For use with Threaded Metal Conduit. Suitable for Wet Locations and Paint Spray Booths.
NEC/CEC:
Class I, Division 1 and 2, Groups C,D
Class II, Division 1 and 2, Groups E,F,G
Class III
Marine Type Electric Fixture Inside Drip-Proof
Type
Applications
• Classied areas where ignitable gases and vapors, dusts,
paint residue, paint powder, or corrosive atmospheres may be
present, or where excessive moisture is a problem.
• Approved for mounting directly inside a paint spray booth.
Complies with NEC 516-3(b) and NFPA No. 33.
• Typical applications include reneries, chemical and
petrochemical plants, textile mills, grain elevators and other
grain-processing facilities, pharmaceutical plants, and paint
spray areas.
Features
• Factory sealed xture. No external seals needed for
classied areas.
• Two lamp:
— Compact size
— Uses two single-ended biaxial 40 W uorescent lamps in a
xture only 29”/736.6 mm long
— Available for 120-277 V, 50/60 Hz
— Available for 120 V, 277 V, 347 V, 50/60 Hz
• Four lamp:
— Uses four single-ended biaxial 40 W uorescent lamps
mounted tandem in a 1333.5 mm (52-1/2 in) long xture
— Available for 120-277 V, 50/60 Hz
— Available for 120 V, 277 V, 347 V, 50/60 Hz
• Easy to install. Has three 19.1 mm (3/4) inconduit hubs on
each end of xture. Two close-up plugs per end are furnished.
Mounts straight down, or at 45° angle to either side. Can be
mounted horizontally, or mounted vertically on wall. Gasketed
end caps remove easily for wiring or relamping.
• Explosionproof, heat-resistant and impact-resistant glass
tubes protect lamps.
• Cool-operating uorescent lamps provide excellent color
rendition and high lumen output per watt. Average lamp life
is 20,000 hours. Lamps are furnished.
• Corrosion resistant.
• Reector (optional) is designed for efcient distribution.
Installs and removes using only a screwdriver.
• Appleton APL xtures are supplied with energy-saving Class
P ballasts, equipped with an automatic thermally activated
protective device.
Standard Materials
• End housing: copperfree (4/10 of 1% max.) aluminum
• Housing hood and optional reectors: heavy gauge aluminum
• Wire guard: stainless steel
Standard Finishes
• End housings and hood: two-coat baked gray epoxy nish
• Reector: white baked powder coat polyester reecting surface
NEC/CEC Certifications and Compliances
• UL Standard: UL 1598, UL 844
• UL Listed: E10794
• CSA Standard: C22.2 No. 250, C22.2 No. 137
• CSA Certied: 025428
Two Lamp APL with Optional Reflector
Four Lamp APL with Optional Reflector
Illustrated Feature
Two Lamp APL
Four Lamp APL
APL Fixture shown with explosionproof,
gasketed end caps removed, allowing
access for wiring and relamping.
Certified to meet the Canadian Electrical Code (CEC) only.
514
APL Two and Four Lamp Fluorescent Factory Sealed Luminaires