Appleton AE Threaded Combination and Non-Combination Full Voltage Motor Starters Catalog Page
AE Threaded Combination and Non-Combination Full Voltage Motor Starters
Explosionproof, Dust-Ignitionproof, Watertight
Units Provide Disconnecting Means and Undervoltage, Circuit and Motor Running Protection.
NEC:
Class I, Division 1 and 2, Groups C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 4, 4X, 7CD, 9EFG
Controls
Applications
• “AE” series threaded type combination and non-combination
motor starters are used in areas where hazardous materials are
handled or stored.
• These units provide disconnecting means, undervoltage
protection, circuit protection and motor running protection.
• Full voltage across the line starting and stopping of squirrel
cage induction motors.
• Remote starting and stopping motor as needed.
Features
• Cast on slotted mounting feet.
• Ground lug package and installation instructions for termination
of ground wires.
• Reset operator with stainless steel shaft.
• Breaker handles can be locked in the ON or OFF position
(combination starters only).
• Drilled and tapped outlets.
• Standard outlets are determined by motor starter size.
• Outlets for remote control wiring.
• Plugged 1/2” outlets top and bottom for breather and drain.
• Three plugged 3/4” NPSM outlets drilled and tapped for
needed lights or switches.
• Ample space is provided for installation and wiring of additional
accessories.
• Painted removable pan.
• Enclosures are designed to accept GE , Square D and
Cutler-Hammer ✢ motor starters. For other brands—contact
your local representative. Cutler-Hammer furnished standard
unless otherwise specifi ed.
• Motor circuit protectors are available on combination starters.
• Enclosures furnished with or without components.
• Readily accessible circuit breaker mounted outside the center
housing.
• Rated for NEMA 4X (gray epoxy-coated inside and outside).
• Acme screw type square threads designed to prevent seizing.
• Bell threads are located inside the housing—protects against
damage or contaminants.
Standard Materials
• Housings: copperfree (4/10 of 1%) aluminum
• Shaft, bushings and exposed hardware: stainless steel
Standard Finishes
• Housings: epoxy - coated inside and outside
Options
• See modifi cations page.
NEC Certifications and Compliances
• UL Standards: UL 508, UL 698, UL 1203
• UL Classifi ed: E84577
NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION MOTOR STARTERS
Exterior Interior
GE is a registered trademark of General Electric Company.
Square D is a registered trademark of Schneider Electric.
✢ Cutler-Hammer is a registered trademark of Eaton Corporation.
© April 2015
621
AE Threaded Combination and Non-Combination Full Voltage Motor Starters
Explosionproof, Dust-Ignitionproof, Watertight
Units Provide Disconnecting Means and Undervoltage, Circuit and Motor Running Protection.
NEC:
Class I, Division 1 and 2, Groups C, D
Controls
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 4, 4X, 7CD, 9EFG
Catalog Numbering Guide
AE 0 T M 48 5 20
▲
NEC Certified
Explosionproof
Motor Starter
Enclosure:
AE - Combination Full
Voltage
AES - Full Voltage
NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION MOTOR STARTERS
NEMA Size:
0
1
2
3
4
5
M - Magnetic Only
T - Thermal Magnetic
Enclosure Type:
T - Threaded
Breaker Type:
Line Voltage:
24 - 240
48 - 480
60 - 600
Breaker Trip:
03 - 3 Amps
07 - 7 Amps
10 - 10 Amps
15 - 15 Amps
20 - 20 Amps
30 - 30 Amps
35 - 35 Amps
50 - 50 Amps
10 - 100 Amps
12 - 125 Amps
15 - 150 Amps
17 - 170 Amps
20 - 200 Amps
25 - 250 Amps
30 - 300 Amps
40 - 400 Amps
Suffix for Other
Options/Features:
See Modifications
Maximum Horsepower:
01 - 1
02 - 2
03 - 3
05 - 5
07 - 7.5
10 - 10
15 - 15
20 - 20
25 - 25
30 - 30
40 - 40
50 - 50
60 - 60
75 - 75
10 - 100
12 - 120
12 - 125
15 - 150
20 - 200
622
© April 2015
Loading...