EN-1
SAFETY INSTRUCTIONS
Read through the following Safety Instructions before you start using the device.
Place the device on a stable surface.
Do not use the device in places that are exposed to oil, water, or dust.
Do not wrap the device with clothing. This might cause heat to build up, resulting
in fire.
Do not place any heavy object on the top of the device.
Do not drop the device. Doing so may cause device malfunction.
Do not insert any foreign objects into the opening slots of the device.
Do not expose the device directly to heated sources such as heaters or prolonged
direct sunlight.
Do not touch the device with wet hands.
Do not use strong cleaning solvents to clean the device. Wipe the device with a
slight damp soft cloth.
Keep the device out of the reach of small children.
Always handle the device with care.
Do not try to disassemble or repair the device. Doing so may cause damage to the
device and may void the warranty.
Do not dispose the device via conventional domestic waste as it is embedded
with a built-in battery. Please dispose it properly according to the local regulation.
Keep this user manual in a convenient place so that you can refer to it if
neccessary.
EN-2
CONTENTS
INTRODUCTION ...................................................................................................... 5
Features ...................................................................................................................... 5
Package Contents ........................................................................................................ 5
Product Overview ....................................................................................................... 6
Front View ............................................................................................................... 6
Rear View ................................................................................................................ 6
LED Indicators ............................................................................................................. 7
GETTING STARTED .................................................................................................. 8
Charging the Device .................................................................................................... 8
Turning the Device On/Off .......................................................................................... 8
Installing a Memory Card/USB Flash drive ................................................................. 9
Installing a memory card ......................................................................................... 9
Installing a USB flash drive ...................................................................................... 9
OPERATING YOUR DEVICE ..................................................................................... 10
Single Touch Backup Function .................................................................................. 10
Using Wi-Backup APP ................................................................................................ 11
Connecting to Your Mobile Devices ...................................................................... 11
Viewing Files .......................................................................................................... 13
Downloading Files ................................................................................................. 15
Uploading Files ...................................................................................................... 18
Copying Files .......................................................................................................... 20
Sharing Files ........................................................................................................... 23
NETWORK CONFIGURATION ................................................................................. 24
Configuring Wi-Fi Hotspot ........................................................................................ 24
Configuring Wi-Fi Repeater....................................................................................... 26
Configuring Other Network Settings ........................................................................ 28
Configuring Password for Wi-Fi Connection ......................................................... 28
Changing OSD Language ....................................................................................... 29
Resetting to Default .............................................................................................. 29
Changing Administrator Password ........................................................................ 29
EN-3
Advanced Settings ................................................................................................. 30
Setting Single Touch Backup Path ......................................................................... 32
APPENDIX ............................................................................................................. 35
Specifications ............................................................................................................ 35
Charging Other Mobile Devices ................................................................................ 36
Resetting the Device ................................................................................................. 36
Contacting Us ............................................................................................................ 37
EN-4
Wi-Backup
USB cable
INTRODUCTION
Features
Supports two-way transfer and sharing data wirelessly between a memory card /
USB flash drive.
Supports “One Touch Backup” and “Real-time Backup” to backup files from a
memory card / USB flash drive to an external hard drive directly.
Supports Power Bank feature for charging your mobile devices.
Free downloadable APP for data management on Android and iOS devices.
Wireless sharing of videos, photos, music, and documents.
Supports up to 5 mobile devices to access files simultaneously.
Built-in Lithium battery provides up to 12 hours of operation time.
Built-in Ethernet port for portable wireless access point.
Its compact design makes it ideal to bring and use when traveling.
Bundled with a USB cable for charging.
Package Contents
Carefully unpack and make sure the following items are included in the package.
EN-5
No.
Item
Description
1
USB 2.0 port
(USB-B)
Connect USB storage devices such as USB flash drive or
external hard disk drive.
2
Memory card slot
Insert a memory card.
3
Mode switch
Slide to switch to different mode.
4
One Touch Backup
button
Press to transfer data between a memory card / USB
flash drive to an external hard drive.
5
Status LEDs
Indicate the system operation status.
No.
Item
Description
1
Reset hole
Insert the pointed object to reboot the system.
2
Micro USB port
Connect a USB cable to charge the battery.
3
Ethernet port
Connect to a local area network (LAN) using a RJ-45
cable.
4
USB 2.0 port
(USB-A)
Connect USB storage devices such as USB flash drive or
external hard disk drive.
Product Overview
Front View
Rear View
EN-6
LED Type
LED Color
Description
Power ( )
Green
The device is turned on.
Orange
The device battery is low.
Wi-Fi ( )
Blue
Wi-Fi connection is active.
Media ( )
Green
A memory card or USB drive is inserted into its
respective slot/port.
Charging ( )
Red
Battery charging in progress.
Off
Charging complete.
LED Indicators
The LED color varies depending on the system and function status.
EN-7
GETTING STARTED
Charging the Device
When the Power LED lights orange, you need to charge the device using the supplied
USB cable.
1. Connect one end of the USB cable to the USB port of the device.
2. Connect the other end of the USB cable to the computer or power adapter of
Smartphone/tablet.
The Charging LED lights red while the battery is charging. When the battery is
fully charged, the Charging LED will automatically turn off.
Turning the Device On/Off
To power on:
Slide the Mode switch to .
The Power LED lights green, indicating the device is turned
on.
Note:
The Wi-Fi function will be activated approximately
25 seconds (blinking blue light) after the device is
turned on.
To power off:
Slide the Mode switch to OFF.
EN-8
or
Installing a Memory Card/USB Flash drive
This device is equipped with one memory card slot and two USB ports.
Installing a memory card
Insert the memory card with the gold contacts facing down into its slot.
Installing a USB flash drive
Plug the USB flash drive directly into the available USB port.
Note:
If you plug a USB flash drive to the USB port on the front of the device and
install an SD card at the same time, the system will recognize the SD card as
the first priority.
Do NOT remove the memory card or USB flash drive while file transferring is in
progress.
EN-9
LED Color and Behavior
Description
Orange (Solid)
Ready to copy files.
Orange (Blinks)
File copying process in progress.
Green (Solid)
File copying process is complete.
Red (Solid)
File copying process is failed.
or
OPERATING YOUR DEVICE
Single Touch Backup Function
With this function, you can use this device as a card reader and backup files from a
memory card / USB flash drive to an external hard drive directly.
1. Insert an SD card into the card slot or plug USB flash drive to the USB port.
2. Plug a USB flash drive or an external hard drive to the USB port on the rear of the
device.
3. After the Single Touch Backup LED lights orange, press the Single Touch Backup
button for more than 2 second to copy all files from the SD card / USB flash drive
(USB-B) to a USB flash drive / HDD (USB-A). Wait until the Single Touch Backup
LED lights green, indicating that the backup function is complete.
To cancel the backup function during the file transfer, press and hold the
Single Touch Backup button until the Single Touch Backup LED lights green
and fades out. Wait until the Single Touch Backup LED lights orange, indicating
that the backup function is cancelled.
Single Touch Backup LED Indicator
EN-10
Mobile Device Type
System Requirements
Android
Android OS 2.3~2.x, and 4.0~4.x
iOS
iOS 5.0 and above
Android
iOS
Using Wi-Backup APP
Connecting to Your Mobile Devices
List of Supported Devices
Initial Setup
Step 1: Install APP
Download and install Wi-Backup APP from Play Store / App Store.
EN-11
Android
iOS
Step 2: Power ON
Slide the Mode switch to . Refer to the “Turning the Device On/Off” section on
page 8.
Step 3: Connect to Your Mobile Device
1. On your mobile device, launch Settings.
2. Set the Wi-Fi setting to ON.
The available networks are listed.
3. Tap Wi-Backup_xxxxxx to connect to the device.
EN-12
File Type
File Format
Video
M4V / MP4 / MOV
Music
MP3 / WAV / AAC
Picture
JPG / BMP / PNG
Document
PDF / DOC / PPT / TXT / HTM / XLS / PPTX / DOCX / XLSX
Android Device
iOS Device
Viewing Files
Supported File Format
Note:
To view document file:
On HTC/Samsung mobile devices, you can use Polaris Office APP to
view the document.
On other Android devices, you can install OliveOffice APP or similar
applications to view the document.
To play media files (video or music):
On iPhone, you can use OPlayer Lite APP to play the media files. On
iPad, you can use OPlayer HD Lite APP to play the media files.
On Android device, you can use MX Player or Mobo Player APP.
To view files stored in the memory card/USB flash drive, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Browse the folder category. If you plug a single partition disk (< 128GB), there are
four types of categories are displayed on the screen.
EN-13
Android Device
iOS Device
Note:
To access all files directly on your USB flash drive or SD card, tap SD/USB-B or
USB-A.
3. Tap the desired folder category and browse the files.
EN-14
[Select option]
[Save to mobile device]
[Save to Collections]
Downloading Files
To save the desired file(s) stored in the memory card/USB flash drive into your
mobile device, perform the following:
Android Device
1. On your mobile device, launch Wi-Backup APP.
2. Select and hold the file that you want to download.
3. Select one of the following options:
Save to Device Library: Copy the file into your mobile device.
Download to App: Copy the file into Collections tab.
Note:
To select several files at simultaneously, tap and select the desired files.
Then tap to display the options menu.
To rename the selected file, tap Rename.
To move the selected file to another folder, tap Move.
To delete the selected file, tap Delete.
4. Select the location where you want to save the file and tap OK.
EN-15
[Option1. Select > 1 file]
[Option 2. Select single file]
[Save to Collections]
[Save to iPhone/iPad]
iOS Device
1. On your mobile device, launch Wi-Backup APP.
2. Browse the files and tap Edit.
3. Select the file that you want to download. Then tap and select one of the
following options:
Save to library: Copy the file into your iPhone/iPad (Camera Roll).
Download: Copy the file into Collections tab.
EN-16
Note:
To rename the selected file, tap Rename.
To move the selected file to another folder, tap Move.
To delete the selected file, tap Delete.
4. Select the location where you want to save the file and tap Done.
EN-17
[Select option]
[Select the files and choose
upload location]
[Save to SD card/USB flash
drive]
Uploading Files
To upload the desired file(s) stored in your mobile device into the memory card/USB
flash drive, perform the following:
Android Device
1. On your mobile device, launch Wi-Backup APP. Then tap Collections tab.
2. Tap Upload from Smart Device and select the file that you want to upload.
Note:
To select multiple files, tap and select the desired files.
3. Then select the location where you want to save the file into the SD card/USB
flash drive and tap Upload.
EN-18
[Select option]
[Select file(s) to upload]
iOS Device
1. On your mobile device, launch Wi-Backup APP. Then tap Collections tab.
2. Tap Upload from Camera Roll or Upload From Music Library and select the file(s)
that you want to upload. When finished with the file selection, tap Done.
3. Then select the location where you want to save the file(s) into the SD card/USB
flash drive and tap Done.
EN-19
[Select option]
[Select and hold the file
then select copy]
[Save to SD card/USB flash
drive]
Copying Files
To copy the file(s) stored in your SD card into the USB flash drive (or vice versa),
perform the following:
Android Device
1. Insert an SD card or a USB flash drive into its slot and plug a USB flash drive to the
USB port on the rear of the device.
2. On your mobile device, launch Wi-Backup APP.
3. Tap USB-A or SD/USB-B.
4. Select and hold the file that you want to copy and then tap Copy.
5. Then select the location where you want to save the file into the SD card/USB
flash drive and tap Copy.
Note:
After the copy operation is complete, tap Status tab or review Backup_log.txt
from the root directory of the target device to check the Backup history.
Do NOT remove the memory card or USB flash drive while file transferring is in
progress.
EN-20
[Select option]
[Select single file]
[Tap Copy to save to SD
card/USB flash drive]
iOS Device
1. Insert an SD card or a USB flash drive into its slot and plug a USB flash drive to the
USB port on the rear of the device.
2. On your mobile device, launch Wi-Backup APP.
3. Tap USB-A or SD/USB-B.
4. Browse the file and tap Edit.
5. Select the file that you want to copy and then tap > Copy.
Ex. When select single file:
EN-21
[Select option]
[Select multiple files]
[Tap Copy to save to SD
card/USB flash drive]
Ex. When select multiple files:
6. Then select the location where you want to save the file into the SD card/USB
flash drive and tap Done.
Note:
After the copy operation is complete, tap Status tab or review Backup_log.txt
from the root directory of the target device to check the Backup history.
Do NOT remove the memory card or USB flash drive while file transferring is in
progress.
EN-22
Android
iOS
Sharing Files
To share files via a sharing application, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Select the file to share.
Android Device
Tap and hold the file that you want to share and tap Export.
iOS Device
Browse the file and tap Edit. Then select the file that you want to share and
tap > Export.
3. Select the desired sharing application.
Note:
The available sharing application varies depending on the applications
installed in your mobile device.
EN-23
Android
iOS
NETWORK CONFIGURATION
Configuring Wi-Fi Hotspot
You can configure this device as a gateway and enable you to use this device as a
wireless access point.
To configure this function, perform the following:
1. Connect one end of the RJ-45 cable to the Ethernet port of the device.
2. Plug the other end of the RJ-45 cable to the Ethernet port on a router or network
switch.
3. On your mobile device, launch Wi-Backup APP.
4. Tap Settings tab.
5. Tap Device Setting > Gateway(WAN).
6. The WAN Interface Setup page appears. Select the type of internet connection
you are using.
EN-24
Note:
Please contact your local Internet Service Provider (ISP) if you are not sure
about the type of network connections you are using and the required
parameters to complete the system configuration.
7. Tap Apply. The system will automatically reboot.
8. To use the Wi-Fi connection, simply connect your portable device (i.e. tablet,
notebook, or Smartphone) to the device. See “Connecting to Your Mobile Devices”
on page 11.
EN-25
Android
iOS
Configuring Wi-Fi Repeater
This device also supports Wi-Fi Repeater function. When your mobile device is
getting poor Wi-Fi signal from this device, you can connect this device to an available
wireless router to extend the range of the Wi-Fi network.
To configure this function, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > WiFi Repeater. The available networks are listed.
4. Tap the desired wireless network.
EN-26
Android
iOS
Note:
Some networks require a network security key or a password. Enter the
password and tap Connect.
EN-27
Android
iOS
Configuring Other Network Settings
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. On Device Setting page, you can also configure the Wi-Fi setting connection,
change the OSD language, reset to default, and other advanced settings.
Note:
Tap Home to return to File Server page.
The Advanced Settings option is reserved for advanced configuration only. It is
recommended not to alter these settings unless instructed by our Customer
Service.
Configuring Password for Wi-Fi Connection
To prevent unauthorized access to this device, we highly recommend you create a
password.
To configure a password, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > WiFi Setting.
4. The WiFi AP Setting page appears. Select the encryption type and enter the
password.
5. Tap Apply to save the settings.
EN-28
Changing OSD Language
To change the on-screen display (OSD) language, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > Multiple Language.
4. Select the desired language and tap Apply to save the settings.
Resetting to Default
To restore all parameters to the default settings, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > Reset to Default.
4. A confirmation message appears on the screen. Tap OK to reset the device.
Changing Administrator Password
To set or change the user name and password, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > Admin. Password.
4. The Password Setup page appears. Configure the following options:
New User Name: Enter the new user name.
New Password: Enter the new password.
Confirmed Password: Reenter the new password.
5. Tap Apply to save the settings.
EN-29
Android
iOS
Advanced Settings
Setting DLNA
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > Advanced Settings > DLNA
Note:
The default setting is Disable, tap Enable > Apply
After 5 seconds in rebooting, the DLNA setting is done.
EN-30
Android
iOS
Setting Samba
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > Advanced Settings > Samba
Note:
The default setting is Disable, tap Enable > Apply
After 20 seconds in rebooting, the Samba setting is done.
EN-31
Android
iOS
Setting Single Touch Backup Path
To configure this function, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab
3. Tap Set One Touch Backup Path tab
Note:
The Set One Touch Backup Path page appears.
Default Settings: Source Path / sdb1(USB/SD), Target Path / sda1(USB)
EN-32
Android
iOS
Android
iOS
4. Tap Choose tab, then select desired backup source path.
(Ex: Select USB-A)
EN-33
Android
iOS
Android
iOS
5. Select the folder you would like to backup files, then tap OK tab.
(Ex: Select SG folder)
6. Tap Save tab to save the path settings.
EN-34
Item
Specifications
Hardware Specifications
Standard
IEEE 802.11b/g/n standards compliant
Wireless LAN
1T1R Mode (150Mbps)
Antenna
Exclusive built-in PCB Antenna
Interface
Micro USB Port for PC Card Reader Mode / USB Charger Mode
RJ45 (WAN Port)
Reset (3Sec) button
Slide Switch for Wireless Mode & Power Bank Mode
Push Button Key for Single Touch Backup Mode
USB-A for USB-HDD (Max. 1A) /
USB-B for UFD / Power Bank Mode (Max. 2.0A)
Memory Card I/F for SD / SDHC / SDXC / MMC
Frequency Range
2.400 ~ 2.4835 GHz (subject to local regulations)
Data Rate
802.11n: up to 150Mbps
802.11g: 6,9,12,18,24,36,48,54Mbps
802.11b: 1,2,5.5,11Mbps
Coverage Area
Up to 3 times faster than existing 802.11b/g product
Battery Type
Li-Polymer Rechargeable Battery
It provides up to 12 hours of operation time based on SDHC 32GB
with MP4 Video File (1.42GB_2Hours) Continuous Playback
DC Power Input
for Recharge
DC5V Power Input (max. 1A) is designed for recharge
(depending on the USB Adapter / Port)
Software Specifications
WAN
DHCP Client
Static IP
PPPoE (for ADS,L etc)
Wi-Fi
Channel Number selection
20MHz / 40MHz channel bandwidth selection
Support updating different SSID / Password
Support WiFi Repeater & Gateway Mode
High security supported: WEP 64 / 128 bit, WPA, WPA2, WPA2
Mixed
File System for
SD/SDHC/SDXC,
UFD / USB-HDD
FAT16/32 (VFAT) File System
exFAT File System
NTFS File System
APPENDIX
Specifications
EN-35
Charging Other Mobile Devices
You can use this device as a Power Bank to charge another mobile device.
1. Connect one end of the USB cable to the USB port of the device.
2. Connect the other end of the USB cable to the USB port of your mobile device.
3. Slide the Mode switch to . The battery charging will start automatically.
4. Disconnect the USB cable when the charging process is complete.
Resetting the Device
When the device hangs, insert a pointed object such as a paper clip into the Reset
Hole for four seconds until the Wi-Fi LED turns off.
The system will automatically reset all parameters to the default settings and reboot.
EN-36
Contacting Us
When you encounter any problem while using this device, try to reset the device as
described in the previous section.
If the problem still persists, you can contact us by using the Send Feedback option in
the Settings (Wi-Backup APP) or by visiting www.apotop.com/tw.
EN-37
Loading...