
36H Series
Model PRH - High Capacity Pressure Reducing Valve
DESCRIPTION
The Apollo® PRH (36H Series) Pressure Reducing Valves are designed for commercial, industrial,
and institutional applications to reduce incoming water pressure for protection of plumbing
system components and to reduce water consumption. The valves are made with proven
ASTM grade bronze and stainless steel materials. The PRH provides high capacity ow with low
pressure drop. It is designed with an integral by-pass relief to protect against thermal expansion
downstream. The bottom access enables easy in-line cleaning or seat replacement.
Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO Number:
Representative:
Wholesale Distributor:
FEATURES
• Sealed Spring Cage for Vault Installation
• Ultra-high Flow Capacity
• Internal Thermal Expansion By-pass
• Local Code Approvals
• Standard Factory Setting: 50 psi
• Three spring ranges cover 10 – 125 psi
• Stainless Steel Bolts and Spring
• 150 lb ANSI B16.24 Flange Connection
Option
• In-line strainer option
• 100% MADE IN THE USA
PERFORMANCE RATING
•
Maximum Operating Pressure: up to 400 psig
• Temperature Range: 33 °F – 180 °F
APPROVALS
• ASSE 1003
• CSA B356
Not intended for potable water
PART NUMBER
36H - X X X - 0X
END CONNECTIONS
2 - FNPT x FNPT (Standard) 0 - Standard 3 - 1/2”
7 - Flanged (2-1/2” - 3” only) 1 - With Y-Strainer 4 - 3/4” 02 - 10-35 psig
OPTIONS SIZE PRESSURE RANGE
01 - 25-75 psig (Standard)
5 - 1” 03 - 75-125 psig
6 - 1-1/4”
7 - 1-1/2”
8 - 2”
9 - 2-1/2”
0 - 3”
MODEL NUMBER
PRH - X X X X
END CONNECTIONS
T - Threaded Y - with
F - ANSI 150# Flanges Y-Strainer H - 75-125 psig (set at 100) 34 - 3/4”
(2-1/2” - 3” only) L - 10-35 psig (set at 25) 1 - 1”
ACCESSORIES
PRESSURE ADJ. RANGE SIZE
Standard
- 25-75 psig (set at 50) 12 - 1/2”
114 - 1-1/4”
112 - 1-1/2”
2 - 2”
212 - 2-1/2”
3 - 3”
STANDARD MATERIALS LIST
Part Name Material
Body Bronze, ASTM B584
Bonnet/Cap Bronze, ASTM B584
Diaphragm FDA approved Buna-N W/ Nylon
Seat disc FDA approved EPDM
Yok e Bronze, ASTM B-16
Springs Stainless Steel
O-Rings FDA approved Nitrile
Apollo Valves, Manufactured by Conbraco Industries, Inc.
701 Matthews Mint-Hill Road, Matthews, NC 28105 USA
www.apollovalves.com | (704) 841-6000
This specication is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion of this specication without notice and without incurring
obligation to make such changes to Conbraco products previously or subsequently sold. Please visit our website @ www.apollovalves.com for the most current information.
SS1087 © 10/14 Page 1 of 2

36H Series
Model PRH - High Capacity Pressure Reducing Valve
DIMENSIONS
Model
Number
Part
Number
Size
(in.)
A B C D E F
Dimensions (in.)
PRH 36H-203 1/2 4.12 2.25 9.25 1.87 8.37 4.00 7.00 6.0
PRH 36H-204 3/4 4.12 2.25 9.25 2.44 9.00 4.00 8.00 6.0
PRH 36H-205 1 4.82 2.31 9.81 4.00 10.25 4.70 12.00 8.0
PRH 36H-206 1 1/4 6.19 3.19 13.20 3.37 12.50 6.50 29.00 24.0
PRH 36H-207 1 1/2 6.75 3.19 13.20 3.87 13.13 6.50 29.00 23.0
PRH 36H-208 2 8.12 3.50 16.00 4.63 16.00 7.63 47.00 38.0
PRH 36H-209 2 1/2 8.12 3.50 16.00 6.00 17.70 7.63 49.00 37.0
PRH 36H-200 3 10.37 4.00 19.12 7.00 20.50 9.75 87.00 70.0
Flanged
PRH 36H-709 2 1/2 10.37 3.50 16.00 7.12 21.70 7.63 105.00 55.0
PRH 36H-700 3 12.50 4.00 19.12 8.12 24.50 9.75 132.00 104.0
* Nominal dimensions are shown. Allowances must be made for manufacturers’ tolerances.
FLOW CAPACITY (GPM)
Pipe Size
Fall-O*
(PSI)
5 8.5 10 11.5
1/2”
10 13.6 16 18.4 10 61.5 72.3 83.1
15 17.9 21 24.2 15 90.1 106.0 121.9
20 21.3 25 28.8 20 113.1 133.0 153.0
5 10.6 12.5 14.4
3/4”
10 20.4 24.0 27.6 10 126.7 149.0 171.4
15 28.1 33.0 38.0 15 174.3 205.0 235.8
20 34.0 40.0 46.0 20 231.2 272.0 312.8
5 17.0 20.0 23.0
1”
10 29.8 35.0 40.3 10 132.6 156.0 179.4
15 40.8 48.0 55.2 15 200.6 236.0 271.4
20 51.0 60.0 69.0
5 21.3 25.0 28.8
1-1/4”
10 51.9 61.0 70.2 10 176.0 207.0 238.1
15 80.8 95.0 109.3 15 282.5 332.4 382.3
20 106.3 125.0 143.8 20 365.5 430.0 494.5
* Fall O is the dierence between the PRV’s set pressure and the owing pressure at any given demand.
Pressure Dierential (PSI)
25 50 75
Pipe Size
1-1/2”
2”
2-1/2”
3”
Fall-O *
(PSI)
Wt.
(lbs.)
w/strainer
Wt.
(lbs.)
wo/strainer
D
Pressure Dierential (PSI)
25 50 75
5 29.8 35.0 40.3
5 55.3 65.0 74.8
5 58.7 69.0 79.4
20 271.2 319.0 366.9
5 80.8 95.0 109.3
F
TOP VIEW
C
USA
USA9USA
B
E
A
PRH SERIES PRV FLOW RATE VS. PRESSURE FALL-OFF
Note: Flow curves are based on static conditions of
100 psi inlet pressure and 50 psi outlet pressure.
Pressure Fall-o is the decrease in downstream
regulated pressure when the ow increases.
Apollo Valves, Manufactured by Conbraco Industries, Inc.
701 Matthews Mint-Hill Road, Matthews, NC 28105 USA
This specication is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion of this specication without notice and without incurring
obligation to make such changes to Conbraco products previously or subsequently sold. Please visit our website @ www.apollovalves.com for the most current information.
SS1087 © 10/14 Page 2 of 2
www.apollovalves.com | (704) 841-6000