Apollo Conbraco 34CLF User Manual

SUBMIT TA L
2.61 2.61
6.50
SHEET
34CLF Series
Thermostatic High Capacity Mixing Valve
LEAD FREE
Job Name:
Job Location:
Engineer:
Contractor:
Tag :
PO#:
Rep:
Wholesale Dist.:
DESCRIPTION
FEATU R E S
• Standard Mix Temp. Range (-01) & optional Hydronic High Temp. (-H1)
• Sizes 3/4”, 1”, 1-1/4”, 1-1/2”, 2” FNPT
• Patented “Finger Grip” Pads for Easy Inline Shuttle Maintenance
• Hot & Cold Water Supply Failure Protection
• Certified 3rd Party Lead Free
• Made in USA - ARRA compliant
DIMENSIONS
PART
NUMBER
34CLF-104-01 3/4 ” FNPT
34CLF-105-01 1” FNPT
34CLF-106-01 1- 1/4” FNPT
34CLF-107-01 1 -1/2” FNPT
34CLF-108-01 2” FNPT
SIZE (IN.)
OPTIONS
• -01 (Standard Temp 90°F - 140°F)
• -H1 (Hydronic, High Temps/Non-ASSE 130°F - 180°F)
• Bronze Wye Strainer - Refer to 59LF Series
APPROVALS
• ASSE 1017 - Temperature Actuated Mixing Valve for Hot Water Distribution Systems
• CSA B125.3 - Plumbing Supply Fittings
• NSF/ANSI 372 - Lead Free
10.31
6.08
2.78
71
STANDARD MATERIALS LIST
BODY
TH ER MOSTAT
SHUTTLE CARTRIDGE
STEM
RE TAI NER
SPRING
LF Bronze A STM C8983 6
LF Copper/Brass (Wax Filled)
Glass Filled Nor yl
LF Bras s ASTM C27451
1/2” - 1 ”: ASTM C27451 1-1/4” - 2”: ASTM C89 836
Stainless Steel
6.77 MAX
PERFORMANCE RATING
• Minimum Flow Rate: 1.0 GPM*
• Maximum Pressure: 150 psig
• Maximum Temperature: 200°F
*when the valve is installed at or near hot water source w/ recirculated tempered water with a continuously operating pump.
*LEAD FREE: The wetted surfaces of this product shall contain no more than 0. 25% lead by weighted average. Complies with Federal Public Law 111-380. ANSI 3rd party approved and listed.
(704) 841-6000 apollovalves.com
SS1385 © 08/19 Page 1 of 1
This specification is provided for reference only. Apollo reserves the right to change any portion of this specification without notice and without incurring obligation to make such changes to Apollo products previously or subsequently sold. Most current information available at apollovalves.com.
Loading...