Apollo Conbraco 163S-LF User Manual
163S-LF Series
Class 125, PTFE Disc, Solder Swing Check
SUBMITTAL SHEET
DESCRIPTION
The lead free* Apollo® Model 163S-LF (61YLF Series) Swing Check provides a reliable, long lasting, “Made in the USA” alternative to globally sourced
check valves for potable water service. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials. The
Apollo® swing check may be installed in either horizontal or vertical orientation with upward flow.
LEAD FREE
Job Name:
Job Location:
Engineer:
Contractor:
Tag :
PO#:
Rep:
Wholesale Dist.:
FEATU R ES
• Lead Free* – ANSI 3rd Party Certified
• Dezincification Resistant Bronze Construction
• Renewable PTFE Seat Disc
• 100% Factory Tested per MSS SP-139
• Solder Connection
• Cast, Machined and Assembled in the USA
APPROVALS
• MSS SP-80 Design & Tested
• MSS SP-139, “Copper Alloy Gate, Globe, &
Check Valves”
• ASME B16.18, “Cast Copper Alloy Solder Joint
Pressure Fittings
• CSA B51 CRN 0C14667.5
• ARRA Compliant
PRECAUTIONARY NOTE:
PERFORMANCE RATING
• Cold Working Pressure:
200 psi (13.8 Bar) at 100°F
• Temperature Range*: 20°F to 406°F
*Valves should be in open position to allow complete
drainage during freezing conditions.
Not recommended for applications which may
induce pulsation or repetitive vibration. See
Installation Manual for details.
DIMENSIONS
MODEL
NUMBER
163S12LF 61YLF-103-T1 1/2” 1.65 2.53 .62 7.0
163S34LF 61YLF-104-T1 3/4 ” 1.9 3.36 .91 12.0
163S1LF 61YLF-105-T1 1” 2.26 4.07 1.7 28.6
163S114LF 61YLF-106-T1 1- 1/4” 2.99 5.28 3.2 39.0
163S112LF 61YLF-107-T1 1-1/2” 2.99 5.28 2.7 56.0
163S2LF 61YLF-108-T1 2” 3 .74 6.50 4.9 152.0
Warning: Do not use in reciprocating compressor service.
PART
NUMBER
SIZE
(IN.)
HEIGHT
(IN.)
LENGTH
(IN.)
WEIGHT
(LB.)CV(GPM )
STANDARD MATERIALS LIST
BODY
CAP
HANGER
PIN
SE AT
PLUG
ASTM B584-C8 9836 Bronze
ASTM B584-C8 9836 Bronze
304 Stainless Steel or
ASTM B584 C 89836 Bronze
304 Stainless Steel
PTFE
ASTM B16 Brass
*LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public Law 111-380 . ANSI 3rd party approved and listed.
(704) 841-6000
apollovalves.com
SS1322 © 07/18 Page 1 of 1
This specification is provided for reference only. Apollo reserves the right to change any portion of this specification without
notice and without incurring obligation to make such changes to Apollo products previously or subsequently sold.
Most current information available at apollovalves.com.
Loading...