
103T
Class 125, Rising Stem, Union Bonnet, NPT, Gate Valve
SUBMITTAL SHEET
Job Name:
Job Location:
Engineer:
Contractor:
Tag :
PO#:
Rep:
Wholesale Dist.:
DESCRIPTION
The Apollo® Model 103T (30 Series) Gate Valve provides a cost eective “Made in the USA” alternative to globally sourced multi-turn valves. These valves
are cast, machined, assembled, and tested in South Carolina. The Apollo® gate valve is ideal for use in a wide variety of plumbing and heating applications
including building service piping systems.
FEATU R ES
• Guided Solid Bronze Disc Wedge
• Adjustable Graphite Stem Packing
• Rising Stem
• Dezincification Resistant
• All Bronze Construction
• 100% Factory Tested Per MSS
• NPT Connection
• Union Bonnet
• Malleable Iron Rugged Hand Wheel
• 100% Cast, Machined and Assembled in the USA
• ARRA Compliant
PERFORMANCE RATING
• Saturated Steam:
• 125 psi (8.6 Bar) to 353°F(178°C)
• Cold Working Pressure:
200 psi (13.8 Bar) at 100°F
• Temperature Range*: -20°F to 406°F
*Valves should be in open position to allow complete
drainage during freezing conditions.
APPROVALS
• MSS SP-80 - Bronze Gate, Globe, Angle & Check
Valves - Type 2
STANDARD MATERIALS LIST
BODY
BONNET
STEM
UNION NUT
DISC WEDGE
PACKING
PACKING NUT
HAND WHEEL
NAMEPLATE
• ASME B1.20.1 - Pipe Threads, General Purpose (Inch)
• CRN 0C14667.5
DIMENSIONS
MODEL NO. PART NO. SIZE (IN.) HEIG HT OPEN (IN.) LENGTH (IN.) WEIG HT (LB.) CV (GP M)
103T14 30-051-01 1/4 ” 4.57 1.76 .90 3.0
103T38 30-052-01 3/8” 4.51 1.76 .87 6.0
103T12 30-053-01 1/2” 4.85 2.03 1.07 12.5
103T34 30-054-01 3/4” 5.71 2.07 1.43 24.0
103T1 30-055-01 1” 6.71 2.45 2.44 72.3
103T114 30-056-01 1 -1/4” 8.10 2.63 3.70 80.0
103T112 30-057-01 1-1/2” 9.08 2.88 4.95 119.0
103T2 30-058-01 2” 11.28 3.06 7.53 338.0
103T212 30-059-01 2-1/2” 14.58 4..96 15.33 395.0
103T3 30-050-01 3” 19.07 4.48 19.56 435.0
Bronze, ASTM B62
Bronze, ASTM B62
ASTM B21 UNS C46400
Bronse, ASTM B 371/B62
Bronze, ASTM B62
®
Grafoil
(Asbestos Free)
Brass, ASTM B16
Malleable Iron
Aluminum
(704) 841-6000
apollovalves.com
SS1191 © 07/18 Page 1 of 1
This specification is provided for reference only. Apollo reserves the right to change any portion of this specification without
notice and without incurring obligation to make such changes to Apollo products previously or subsequently sold.
Most current information available at apollovalves.com.