Model 101T
Job Name:
Job Location:
Engineer:
Tag:
Wholesale Distributor:
Representative:
P.O. Number:
Contractor:
Size
Model
Item Number
1/4”
101T14
30-001-01
3/8”
101T38
30-002-01
½”
101T12
30-003-01
¾”
101T34
30-004-01
1”
101T1
30-005-01
1-1/4”
101T114
30-006-01
1-½”
101T112
30-007-01
2”
101T2
30-008-01
2-1/2”
101T212
30-009-01
3”
101T3
30-000-01
Part Name
Material
Body
ASTM B62 Bronze
Bonnet
ASTM B62 Bronze
Stem
ASTM B371 Bronze
Disc
ASTM B62 Bronze
Packing
Grafoil®
Hand Wheel
Malleable Iron
Nameplate
Aluminum
Size
Height
(open)
in.
Length
(in.)
Weight
(Lbs)
Cv
(gpm)
¼”
4.57
1.76
.80
3.0
3/8”
4.51
1.76
.77
6.0
½”
4.85
2.03
1.0
12.5
¾”
5.71
2.07
1.30
24.0
1”
6.71
2.45
2.16
72.3
1-1/4”
8.1
2.63
3.2
80.0
1-1/2”
9.08
2.88
4.36
119.0
2”
11.28
3.06
7.01
338.0
2-1/2”
14.58
4.13
13.79
395.0
3”
19.07
4.48
17.7
435.0
CLASS 125 GATE VALVE
RISING STEM, NPT
(30 SERIES)
Description
The Apollo Model 101T (30 Series) Class 125 Gate valve
provides a cost effective “Made in the USA” alternative to
globally sourced multi-turn valves. These valves are cast,
machined, assembled, and tested in South Carolina. The Apollo
Gate valve can reliably be installed in most plumbing and heating
systems (or building service piping).
Features
Full Port
NPT Connection
Rising Stem
Screw-in Bonnet
Dezincification Resistant Bronze Construction
Guided Solid Bronze Disc
Back seat protection
Adjustable Graphite Stem Packing
Rugged Malleable Iron Hand Wheel
100% Factory tested
Cast, Machined and Assembled in the US
ARRA Compliant
Standards
MSS SP-80, “Bronze Gate, Globe, Angle & Check Valves”,
ASME B1.20.1, “Pipe Threads, General Purpose (Inch)”
CSA B51 CRN 0C14667.5
Performance Rating
Saturated Steam: 125 psi (8.6 Bar) to 353°F(178°C)
Cold Working Pressure: 200 psi (13.8 Bar) at 100°F
Temperature Range: -20°F to 406°F
Order Information
Material Specifications
Dimensions
Conbraco Industries, Inc. 701 Matthews Mint Hill Rd. Matthews NC 28105 USA ; www.apollovalves.com ; 704-841-6000
Conbraco Industries can accept no responsibility for possible errors in this document and reserves the right to alter its product design or construction without notice and without incurring any obligation
to make such changes on Conbraco products previously or subsequently sold. All product specifications are approximate and are provided for reference only.
SS1189 © 11/12 Page 1 of 1
Loading...