APM Base Unit for Power Over Ethernet -201 User Manual

APM CO., LTD

)

)

)

j

)

g

)

(+)

(+)

(-)

(-)

(+)

(+)

(-)

(-)

5

APM-201

Base Unit for Power Over Ethernet

1. Features：

1.1. Single-Port Power Injector

1.2. IEEE 802.3af compliant

1.3. No Software Required

1.4. Easy to Install

1.5. Use Existing Ethernet Cable

2. Input Specifications：

2.1. Power Interface ： DC Jack (See Pin Assignment

2.2. Data Interface ： RJ-45 jack (See Pin Assignment

2.3. Input Voltage ： 48V ± 10 % * Applied from External Switching Adapter ( 90 ~ 264Vac

2.4. Input Current ： 400 mA Max.

1 of 1

3. Output Specification：

3.1. PD Detection & Classification ：

4. General Specification：

4.1. Operating Temperature ： 0℃ ~ +50℃

IEEE 802.3af compliant 4.2. Storage Temperature ： -20℃ ~ +70℃

3.2. Interface ： RJ-45

3.3. Output Volta

3.4. Output Current ： 0.35 A Max.

3.5. Output Power ： 15.4W Max.

3.6. LED Display ： PoE Not Active (Orange), PoE Active (Green)

ack (See Pin Assignment

e ： 48V ± 10 %(42,53

4.3. Humidity ： Up to 90 %

4.4. Cooling ： Free air convection

5. Pin Assignment :

Pin LAN IN LAN Out Pin

1 Tx
2 Tx
3 Rx
4 N.C. +48V 4
5 N.C. +48V 5
6 Rx
7 N.C. GND 7
8 N.C. GND 8

Tx

Tx

Rx

Rx

1

2

3

6

6. Mechanical Dimension :

Units : m/m & Tolerance : 0.xx ± 0.2

1F, No.49, Alley 24, Lane 75, Sec 3, Kang-Ning Rd, Nei-Hu Dist, Taipei 114, Taiwan, R.O.C.

www.apm.com.tw [e-mail] Tel: [phone] Fax: [phone]