APM APE-502401a-1 User Manual

APE-502401a-1
AP Specification
Standards Compliance
SDRAM Flash Radio Frequency Type Modulation Frequency Band
Transmission Power Transmission Rate Access Point Interfaces Sensitivity Antenna Type Security Systems
IEEE 802.11a IEEE 802.3 IEEE 802.3u IEEE 802.3af 32 M Byte 8 M Byte DSSS/ OFDM IEEE 802.11a : OFDM with BPSK, QPSK, 16QAM, 64QAM IEEE 802.11a:
5.15 ~ 5.25 GHz (lower band)
5.25 ~ 5.35 GHz (middle band)
5.725 ~ 5.825 GHz (hi-band)
Frequency can be adjusted from software
IEEE 802.11a: 20 dBm IEEE 802.11a: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 and 108Mbps Auto sensing MDI/MDI-X Ethernet 10/100Base-TX: RJ-45 IEEE 802.11a: -70dBm @ 54Mbps, PER<10% Integrated 15dBi 5.0GHz flat panel antenna 64-bit/ 128-bit/ 152-bit WEP encryption; Wi-Fi Protected Access (WPA) and WPA2
1 of 2
APM CO., LTD
22F-6, No.180, Jingping Rd, Jhonghe City, Taipei County 23581, Taiwan, R.O.C.
www.apm.com.tw apm.sales@msa.hinet.net Tel: +886 2 89431966 Fax: +886 2 89434944
2 of 2
APM CO., LTD
Wireless Setting
Software/Firmware
Operating Environment PoE Regulatory Approval Network Management System OS Support Warranty
Operation Mode – AP / Wireless Client / Repeater / Wireless Bridge (WDS) PtP and PtMP Wireless Mode – 11a/ Super A Site Survey DHCP Client Suppressed SSID Support DFS and TPC Support VLAN Support Multiple SSID Wireless access control by MAC address (deny or accept) WPA Support (WPA personal and enterprise) Web-based configuration via popular browser (MS IE, Netscape…) Windows “Locator” program to help find IP in DHCP client mode Firmware upgrade and configuration backup via Web Rouge AP Detection Reset to default by WebUI SNMP V2.0 Operating Temperature: -30 ~ +70°C DC 48 Volt ± 5%; 0.4A (Max.); AC adapter AC 110V ~ 240V
Windows 2000/XP
One year limited
Standard Accessories
25M Cable 2M Cable
Bracket Kit (U Bolt) Power over Ethernet
Bracket Kit
22F-6, No.180, Jingping Rd, Jhonghe City, Taipei County 23581, Taiwan, R.O.C.
www.apm.com.tw apm.sales@msa.hinet.net Tel: +886 2 89431966 Fax: +886 2 89434944
Loading...