ARCHMI-8XX Series
7”, 8”, 10.1”, 12.1”, 15”, 15.6”, 17”, 18.5”, and 21.5” Intel Atom E3845/Celeron N2930,
Fanless Industrial Compact Size Panel PC
User Manual
Release Date Revision
Apr. 2016 V1.5
®2016 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883 URL: www.aplextec.com
ARCHMI-8XX Series User Manual
1
Revision History
Reversion
Date
Description
1.0
2015/03/25
Official Version
1.1
2015/07/15
Modify Motherboard Description, add Mounting
Description and BIOS OS Selection on P.67
1.2
2015/10/20
Add “UL” Certificate, Modify OS Support
1.3
2016/02/02
Modify Bay Trail to Atom or Celeron, Add 8GB
Memory Spec. for option, UPS battery for
option, and power consumption, com driver
installation, and Net Weight Spec. ; Modify USB
Spec. to 2 x USB 3.0, OS Support Spec., and 17”
and 15” LCD Spec.. Change product and
dimension images. Modify motherboard spec. in
p. 28~35, 37~38, 41~44
1.4
2016/02/26
Modify OS Support Spec.
1.5
2016/04/19
Modify memory Spec.: Remove 2GB memory,
and change 4GB memory from option to default.
Add warning words about UL Certificate.
ARCHMI-8XX Series User Manual
2
Warning!________________________
Avertissement!___________________
Risque de choc électrique - Ne pas faire fonctionner la machine avec son capot
arrière enlevé. Des tensions dangereuses sont élevées à l'intérieur.
Cet équipement génère, utilise et peut émettre une énergie de
radiofréquence et s'il n'est pas installé et utilisé conformément au manuel
d'instructions, il peut provoquer des interférences dans les communications
radio. Il a été testé et approuvé conforme aux limites pour un dispositif de classe
A et selon les règles de la FCC, qui sont conçues pour fournir une protection
raisonnable contre de telles interférences dans un environnement commercial. Le
fonctionnement de cet équipement dans une zone résidentielle est susceptible
de provoquer des interférences, dans ce cas l'utilisateur, à ses propres frais, devra
faire le nécessaire pour prendre toutes les mesures requises pour corriger le
problème.
Electric Shock Hazard – Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.
ARCHMI-8XX Series User Manual
3
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Precaution
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect.
Les piles usagée doivent être recyclées dans la mesure du possible. La mise au
rebut des piles usagées doit resecter les réglementations locales en vigueur en
matière de protection de l'environnement.
Disclaimer
This information in this document is subject to change without notice. In no event
shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this
document or in any related materials.
This product is intended to be supplied by a Listed Power Adapter or DC power
source, output meets SELV, rated 9-36Vdc, 4.5-1.5A or 12Vdc, 4.5A or 19Vdc, 6.31A.,
Tma = 50degree C, and the altitude of operation = 2000m.
If need further assistance with purchasing the power source, please contact to
manufacturer for further information.
ARCHMI-8XX Series User Manual
4
Packing List
Accessories (as ticked) included in this package are:
□ Adaptor
□ Driver & manual CD disc
□ Other.___________________(please specify)
ARCHMI-8XX Series User Manual
5
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆ Avoid your system from static electricity on all occasions.
◆ Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
◆ Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.
Consignes de sécurité
Suivez les messages ci-dessous pour éviter que vos systèmes contre
les dommages:
◆ Éviter votre système contre l'électricité statique sur toutes les
occasions.
◆ Évitez les chocs électriques. Ne pas toucher les composants de cette
carte lorsque la carte est sous tension. Toujours débrancher lorsque le
système n'est pas en cours d'utilisation.
◆ Couper l'alimentation électrique lorsque vous changez tous les
périphériques matériels. Par exemple, lorsque vous connectez un
cavalier ou d'installer des cartes, une forte augmentation de la
puissance peut endommager les composants électroniques ou
l'ensemble du système.
ARCHMI-8XX Series User Manual
6
Table of Contents
Revision History…………………………………………………………………………………………………….1
Warning!/Avertissement!......................................................…………………………….…2
Caution/Precaution/Disclaimer……..………………………………………………………………………3
Packing List…………………………………….……………………………………………………………………..4
Safety Precautions/Consignes de sécurité………………………………….…..……………………..5
Chapter 1 Getting Started
1.1 Features………………………..………………………...…………………………..8
1.2 Specifications…………………...………………………………………………….8
1.3 Dimensions………………………....…………………………………………….11
1.4 Brief Description of ARCHMI-8XX…..….………………………….……17
1.5 Installation of HDD – 7”/8 ”…………..…………...…………………..…..22
1.6 Installation of HDD – 10.1”/15.6”/18.5”………………………………24
1.7 Installation of HDD – 12.1”/15”/17”/21.5”………………….……….25
1.8 VESA Mounting…………………………………..………………………………27
1.9 Panel Mounting……………………………………..………………….……….27
Chapter 2 Hardware
2.1 Motherboard Introduction……………………...……………..………....28
2.2 Specifications…………………………..…………………………………………28
2.3 Jumpers and Connectors Location……………………………………...32
2.4 Jumpers Setting and Connectors…………………………………..……33
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...…….……...…………………………46
3.2 BIOS Setup Utility……………………………………………………………….46
3.3 Main Settings……………………………………..………………………………47
3.4 Advanced Settings……………………………………………………………...48
3.5 Chipset Settings……………………………………….………………………...56
3.6 Security Settings…………………………………………….…………………..58
3.7 Boot Settings…..………………………………………….……………………..59
3.8 Save & Exit Settings……………………………………..…………………....60
Chapter 4 Installation of Drivers
4.1 Intel (R) AtomTM SoC Chipset ………..……...………….………………63
ARCHMI-8XX Series User Manual
7
4.2 Intel (R) VGA Chipset……………………………………………….……......66
4.3 Intel (R) LAN Driver………..………………………………………..………...70
4.4 Realtek ALC662 HD Audio Driver Installation………………………73
4.5 USB 3.0 Driver…………………………………………………………………….74
4.6 Com Driver…..…………………………………………………………………….77
Chapter 5 Touch Screen Installation
5.1 Windows XP/2003/Vista/7 Universal Driver Installation for
PenMount 6000 Series...……………….…………………………………...80
5.2 Software Functions…………………………………………………………....90
Figures
Figure 1.1: Dimensions of ARCHMI-807(P).……………………..……………......11
Figure 1.2: Dimensions of ARCHMI-808(P).……………………..………………...11
Figure 1.3: Dimensions of ARCHMI-810(P).……………………..…………………12
Figure 1.4: Dimensions of ARCHMI-812(P).……………………..…………………12
Figure 1.5: Dimensions of ARCHMI-815(P).……………………..…………………13
Figure 1.6: Dimensions of ARCHMI-816(Resistive Touch)..……….…………13
Figure 1.7: Dimensions of ARCHMI-816(Projected Capacitive Touch)...14
Figure 1.8: Dimensions of ARCHMI-817(P)..……………………………………….14
Figure 1.9: Dimensions of ARCHMI-818(P)….……………………………………..15
Figure 1.10: Dimensions of ARCHMI-821(Resistive Touch)………………….15
Figure 1.11: Dimensions of ARCHMI-821(Projected Capacitive Touch).16
Figure 1.12: Front View of ARCHMI-8XX Series…………………………………..17
Figure 1.13: Rear View of ARCHMI-807/808……………………………………..…18
Figure 1.14: Rear View of ARCHMI-810………………………………………….….18
Figure 1.15: Rear View of ARCHMI-812………………………………………….….19
Figure 1.16: Rear View of ARCHMI-815………………………………………….….19
Figure 1.17: Rear View of ARCHMI-816……………………………………….….….20
Figure 1.18: Rear View of ARCHMI-817……………………………………….….….20
Figure 1.19: Rear View of ARCHMI-818………………………………………….….21
Figure 1.20: Rear View of ARCHMI-821………………………………………………21
Figure 1.21: ARCHMI Series VESA Mounting………………………………………27
Figure 1.22: ARCHMI Series Panel Mounting……………………………………...27
Figure 2.1: Motherboard Dimensions………………………………………….…….31
Figure 2.2: Jumpers and Connectors Location-Board Top……………….….32
Figure 2.3: Jumpers and Connectors Location-Board Bottom…………..…32
ARCHMI-8XX Series User Manual
8
Chapter 1 Getting Started
1.1 Features
7”/8”/10.1”/12.1”/15”/15.6”/17”/18.5”/21.5” Industrial Compact Size Panel PC
Flat front panel touch screen
Fanless design
Intel Celeron N2930(1.83GHz) CPU built-in/Atom E3845(1.91GHz) for option
Onboard 4GB DDR 3L 1600 MHz/8GB(option)
9~36VDC wide-ranging power input
IP65 compliant front panel
Optional projected capacitive touchscreen support 7H anti-scratch surface
1.2 Specifications
ARCHMI-8XX Series
System
CPU
Onboard Intel Celeron N2930(1.83GHz )/Atom E3845(1.91GHz) for option
Chipset
SoC
Memory
Onboard 4GB DDR 3L 1600 MHz/8GB(option)
IO Port
USB
2 x USB 3.0 type A
Serial/Parallel
1 x RS-232 DB-9(COM2)
1 x DB-9 RS-232/422/485 (Default RS-232)(COM1)
Audio
1 x Audio Line Out
LAN
2 x GbE LAN RJ-45
Power
1 x 3-pin DC Power input terminal
1 x 2-pin connector for power on/off button
Option
(Not available for
ARCHMI-807 and
ARCHMI-808)
2 x RS-232 DB-9 + 1 x Mini-PCIe slot via TB-528C2ME1
2 x CAN bus via TB-528CAN2
2 x USB 2.0 type A Via TB-528U2
2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1xRS-232 DB-9 + 1 x Power button
via TB-528C1U2P1 (TB-528C1U2 for ARCHMI-810)
UPS Battery 21W/10.8W/1.95Ah(3S1P)
ARCHMI-8XX Series User Manual
9
UPS Battery and TB-528 expansion board can’t be used in the same time
for ARCHMI-810/812/816/818
Storage Space
Storage
1 x SD card slot, up to 32GB
1 x MO-297 SATA SSD bay (Easy Accessible) (for 7”/8”)
1 x 2.5" SATA HDD bay for SATA HDD (Easy Accessible)
Expansion
Expansion Slot
1 x Internal Mini-PCIe slot full size
Touch Screen – Resistive Touch Window Type
TS Control IC
PenMount 6000 on Board
Interface
USB
Light Transmission
Over 80%
Touch Screen – Projected Capacitive Type
TS Control IC
Chip on tail
Interface
USB
Light Transmission
Over 90%
Power
Power Input
9~36V DC
Mechanical
Construction
RAL 9007
IP Rating
IP65 compliant front panel
Environmental
Operating
temperature
0~50°C
Storage temperature
-20~60°C
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC Class A / UL
Operating System Support
OS Support
Windows Embedded Compact 7, Windows Embedded Standard 7, Windows
7 Pro(FES), Windows 7 Ultimate(FES), Windows Embedded 8 Standard,
Windows Embedded 8.1 Industry Pro, Windows 10 IoT Enterprise 2015LTSB
ARCHMI-8XX Series User Manual
10
ARCHMI-807(P)
ARCHMI-808(P)
ARCHMI-810(P)
ARCHMI-812(P)
ARCHMI-815(P)
Display
Display Type
7” TFT LCD
8” TFT LCD
10.1” TFT LCD
12.1” TFT LCD
15” TFT LCD
Max. Resolution
800 x 480
800 x 600
1280 x 800
800 x 600
1024 x 768
Max. Color
262K
16.2M
16.2M
16.2M
16.7M
Luminance(cd/m²)
350
350
350
450
450
Contrast Ratio
400 : 1
500 : 1
800 : 1
800 : 1
800 : 1
Viewing angle
140(H)/110(V)
140(H)/125(V)
160(H)/160(V)
160(H)/140(V)
160(H)/140(V)
Backlight Lifetime
40,000 hrs
40,000 hrs
40,000 hrs
50,000 hrs
60,000 hrs
Power Consumption
Power
Consumption
MAX:14.1W
(807)
MAX: 13.7W
(807P)
MAX:14.5W
(808)
MAX:13.4W
(808P)
MAX:11.2W
(810)
MAX:14.0W
(810P)
MAX:14.6W
(812)
MAX:15.2W
(812P)
MAX:17.8W
(815)
MAX:17.8W
(815P)
Mechanical
Mounting
VESA Mount 75 x 75
VESA Mount 100 x 100
Dimensions(mm)
202 x 149 x 40
231.1 x 176.1 x 50
285 x 189 x 48.9
319 x 245 x 51.7
410 x 310 x 54.7
Net Weight
1.2 Kg
1.9 Kg
1.9 Kg
2.5 Kg
4.4 Kg
ARCHMI-816(P)
ARCHMI-817(P)
ARCHMI-818(P)
ARCHMI-821(P)
Display
Display Type
15.6” TFT LCD
17” TFT LCD
18.5” TFT LCD
21.5” TFT LCD
Max. Resolution
1366 x 768
1280 x 1024
1366 x 768
1920 x 1080
Max. Color
16.7M
16.2M
16.7M
16.7M
Luminance (cd/m²)
300
350
300
250
Contrast Ratio
500 : 1
1000 : 1
1000 : 1
3000 : 1
Viewing angle
160 (H)/ 160 (V)
170 (H)/ 160 (V)
170 (H)/ 160 (V)
178 (H)/ 178 (V)
Backlight Lifetime
50,000 hrs
30,000 hrs
50,000 hrs
30,000 hrs
Power Consumption
Power Consumption
MAX:20.3W(816)
MAX:18.1W(816P)
MAX:22.1W(817)
MAX:25W(817P)
MAX:29.8W(818)
MAX:28.6W(818P)
MAX:26.7W(821)
MAX:26.7W(821P)
Mechanical
Mounting
VESA Mount 100 x 100
Dimensions(mm)
412 x 277.5 x 60.4
439 x 348 x 64.8
499.6 x 314.6 x 59.9
557 x 362 x 64.8
Net Weight
4.8 Kg
5.1 Kg
5.9 Kg
7.8 Kg
ARCHMI-8XX Series User Manual
11
1.3 Dimensions
Figure 1.1: Dimensions of ARCHMI-807(P)
Figure 1.2: Dimensions of ARCHMI-808(P)
ARCHMI-8XX Series User Manual
12
Figure 1.3: Dimensions of ARCHMI-810(P)
Figure 1.4: Dimensions of ARCHMI-812(P)
ARCHMI-8XX Series User Manual
13
Figure 1.5: Dimensions of ARCHMI-815(P)
Figure 1.6: Dimensions of ARCHMI-816 (Resistive Touch)
ARCHMI-8XX Series User Manual
14
Figure 1.7: Dimensions of ARCHMI-816P (Projected Capacitive Touch)
Figure 1.8: Dimensions of ARCHMI-817(P)
ARCHMI-8XX Series User Manual
15
Figure 1.9: Dimensions of ARCHMI-818(P)
Figure 1.10: Dimensions of ARCHMI-821 (Resistive Touch)
ARCHMI-8XX Series User Manual
16
Figure 1.11: Dimensions of ARCHMI-821P (Projected Capacitive Touch)
ARCHMI-8XX Series User Manual
17
1.4 Brief Description of ARCHMI-8XX
There are 7”, 8”, 10.1”, 12.1”, 15”, 15.6”, 17”, 18.5” and 21.5” Industrial
Compact Size Panel PC in ARCHMI-8XX series, which comes with flat front panel
touch screen and fanless design. It is powered by Intel Atom E3845(1.91GHz) or
Celeron N2930(1.83GHz) CPU built-in, 4GB DDR3L 1600MHz (8GB is for option).
ARCHMI series is 9~36V DC wide-ranging power input and IP65 compliant front panel.
Optional projected capacitive touch support 7H anti-scratch surface is ideal for use as
PC-based controller for Industrial Automation & Factory Automation.
Figure 1.12: Front View of ARCHMI-8XX Series
ARCHMI-8XX Series User Manual
18
Figure 1.13: Rear View of ARCHMI-807/808
Figure 1.14: Rear View of ARCHMI-810
ARCHMI-8XX Series User Manual
19
Figure 1.15: Rear View of ARCHMI-812
Figure 1.16: Rear View of ARCHMI-815
ARCHMI-8XX Series User Manual
20
Figure 1.17: Rear View of ARCHMI -816
Figure 1.18: Rear View of ARCHMI-817
ARCHMI-8XX Series User Manual
21
Figure 1.19: Rear View of ARCHMI-818
Figure 1.20: Rear View of ARCHMI-821
ARCHMI-8XX Series User Manual
22
1.5 Installation of HDD – 7” and 8”
Step 1
There are two screws to deal with when
enclosing or removing the chassis.
Gently remove two screws.
Step 2
There is a SSD card in the bracket. Gently
remove the screw, then carefully pull
SSD card.
Step 3
Take out SSD Card bracket.
ARCHMI-8XX Series User Manual
23
Step 4
You can replace SSD card by unscrewing
four screws as shown in the picture.
Note: four screws are packed in the
packing list.
Step 5
There is a SD card hole in the side of the
machine. You can replace SD card from
there.
Step 6
Gently screw the screws.
ARCHMI-8XX Series User Manual
24
1.6 Installation of HDD – 10.1”/15.6”/18.5”
Step 1
There are two screws to deal with when
enclosing or removing the chassis.
Gently remove two screws.
Step 2
Take the storage cover beside the HMI.
Step 3
You can put or remove HDD into the
machine by pulling the HDD bracket.
ARCHMI-8XX Series User Manual
25
Step 4
There is a SD hole in the side of machine.
You can replace SD card from there.
1.7 Installation of HDD – 12.1”/15”/17”/21.5”
Step 1
There are 2 screws to deal with when
enclosing or removing the chassis.
Gently remove 2 screws.
Step 2
You can put or remove HDD into the
machine by pulling the HDD bracket.
ARCHMI-8XX Series User Manual
26
Step 3
You can remove HDD by unscrewing 4
screws in the HDD bracket.
Note: 4 screws are packed in the packing
package.
Step 4
There is a SD hole in the side of machine.
You can replace SD card from there.
ARCHMI-8XX Series User Manual
27
1.8 VESA Mounting
The ARCHMI series is designed to be VESA mounted as shown in Picture. Just
carefully place the unit through the hole and tighten the given screws from the rear
to secure the mounting.
Figure 1.21: ARCHMI Series VESA Mounting
1.9 Panel Mounting
There are four holes located along the four sides of the HMI. Insert the clamp from
the four sides and tighten them with the nuts provided.
Figure 1.22: ARCHMI Series Panel Mounting
ARCHMI-8XX Series User Manual
28
Chapter 2 Hardware
2.1 Motherboard Introduction
SBC-7111 is a 4" industrial motherboard developed on the basis of Intel Bay trail-I/M
Processors, which provides abundant peripheral interfaces to meet the needs of
different customers. Also, it features dual GbE ports, 3-COM ports and one Mini PCIE
configuration, one VGA port, one HDMI port, one LVDS interface. To satisfy the
special needs of high-end customers, CN1 and CN2 and CN3 richer extension
functions. The product is widely used in various sectors of industrial control.
2.2 Specifications
Specifications
Board Size
170mm x 113mm
CPU Support
Intel Atom E3845 / 1.91GHz (4cores, 10W, onboard)
Intel Atom E3815 / 1.46GHz (1cores , 5W, option)
Intel Celeron N2930 / 1.83 up to 2.16GHz (4cores, option)
Intel Celeron N2807 / 2.16GHz (2cores, option)
Chipset
SoC
Memory Support
Onboard 2GB DDR3L SDRAM (E3845/N2930/E3815/N2807, option)
Onboard 4GB DDR3L SDRAM (E3845/N2930, option)
Onboard 8GB DDR3L SDRAM (E3845/N2930, option)
Graphics
Intel® HD Graphics 542/792MHz (E3845)
Intel® HD Graphics 313/854MHz (N2930)
Intel® HD Graphics 400MHz (E3815)
Intel® HD Graphics 313/750MHz (N2807)
Display Mode
1 x HDMI Port
1 x LVDS (18/24-bit dual LVDS)
1 x CRT Port
Support
Resolution
Up to 1920 x 1200 for HDMI
Up to 1920 x 1200 for LVDS (PS8625)
Up to 1920 x 1200 for CRT
Dual Display
HDMI + LVDS
ARCHMI-8XX Series User Manual
29
HDMI + CRT
LVDS + CRT
Super I/O
ITE IT8518E
Fintek F81216AD
BIOS
AMI/UEFI
Storage
1 x SATAII Connector (7P)
1 x SATAII Connector (7P + 15P)
1 x SD Slot
Ethernet
2 x PCIe Gbe LAN by Intel 82574L
USB
USB 3.0 Hub(USB5534B):
2 x USB 3.0/USB 2.0 (type A)stack ports (E3-USB5/E3-USB6)
1 x USB 2.0 Pin header for CN1 (E3-USB8)
1 x USB 2.0 for USB Touch (E3-USB7)
USB 2.0 Hub(USB2514)
1 x USB 2.0 Pin header for CN2 (E-USB9)
2 x USB 2.0 Pin header for CN3 (E-USB10/E-USB11)
1 x USB 2.0 for MPCIE1 (E-USB12)
Touch Ctrl
1 x Touch ctrl header for TCH1 (E3-USB7)
Serial
1 x RS232/RS422/RS485 port, DB9 connector for external (COM1) Pin 9
w/5V/12V/Ring select
1 x RS232 port, DB9 connector for external (COM2) Pin 9
w/5V/12V/Ring select
2 x UART for CN3 (COM3,COM4)
2 x RS422/485 header for CN2 (IT8518E:COM5/COM6)
Digital I/O
8-bit digital I/O by Pin header (CN2)
4-bit digital Input
4-bit digital Output
4-bit digital I/O by Pin header (CN3)
2-bit digital Input
2-bit digital Output
Battery
Support CR2477 Li battery by 2-pin header (BAT1/CMOS)
Audio
Support Audio via Realtek ALC662-VD HD audio codec
Support Line-in, Line-out, MIC by 2x6-pin header
Keyboard /Mouse
1 x PS2 keyboard/mouse by box pin header (CN3)
ARCHMI-8XX Series User Manual
30
Expansion Bus
1 x mini-PCI-express slot
1 x PCI-express (CN3)
Power Management
Wide Range DC9V~36V input
1 x 3-pin power input connector
POE Power in
1 x 4 Wafer Pin header (DC_IN2)
DC12V input
Switches and LED
Indicators
1 x Power on/off switch (BT1/BT2/PS_SW1/CN2/Cn3)
1 x Reset (CN2)
1 x Power LED status (CN1)
1 x HDD LED status (CN2)
1 x Buzzer
External I/O port
2 x COM Ports (COM1/COM2)
1 x USB 2.0 Port (stack)
2 x USB 3.0/2.0 Ports (stack)
2 x RJ45 GbE LAN Ports
1 x HDMI Port
1 x Stack audio Jack (Line out)
Temperature
Operating: -20℃ to 70℃
Storage: -40℃ to 85℃
Humidity
10% - 90%, non-condensing, operating
Power Consumption
12V /0.80A (Intel Atom E3845 processor with 4GB DDR3L DRAM)
12V /0.60A (Intel Atom E3815 processor with 2GB DDR3L DRAM)
12V /0.70A (Intel Celeron N2930 processor with 4GB DDR3L DRAM)
12V /0.55A (Intel Celeron N2807 processor with 2GB DDR3L DRAM)
EMI/EMS
Meet CE/FCC class A
ARCHMI-8XX Series User Manual
31
(units :mm)
Figure 2.1: Motherboard Dimensions
ARCHMI-8XX Series User Manual
32
2.3 Jumpers and Connectors Location
Figure 2.2: Jumpers and Connectors Location- Board Top
Figure 2.3: Jumpers and Connectors Location- Board Bottom
ARCHMI-8XX Series User Manual
33
2.4 Jumpers Setting and Connectors
1. U2:
(FCBGA1170), onboard Intel Bay trail-I/M Processors.
Model
Processor
Number
PBF
Cores/Threads
TDP
Remarks
SBC-7111-E3845-2G
E3845
1.91GHz
4 / 4
10W SBC-7111-E3845-4G
E3845
1.91GHz
4 / 4
10W
Option
SBC-7111-E3845-8G
E3845
1.91GHz
4 / 4
10W
Option
SBC-7111-N2930-2G
N2930
1.83 up to
2.16GHz
4 / 4
4.5 /7.5W
Option
SBC-7111-N2930P-CN3V-2G
N2930
1.83 up to
2.16GHz
4 / 4
4.5/7.5W
Option
SBC-7111-N2930-4G
N2930
1.83 up to
2.16GHz
4 / 4
4.5/7.5W
Option
SBC-7111-N2930-8G
N2930
1.83 up to
2.16GHz
4 / 4
4.5/7.5W
Option
SBC-7111-E3815-2G
E3815
1.46GHz
1 / 1
5W
Option
SBC-7111-N2807-2G
N2807
1.58 up to
2.16GHz
2 / 2
2.5/4.3W
option
2. H3/H4/H5/H6 (option):
U2 Heat Sink Screw holes, four screw holes for Intel Bay trail-I/M Processors
Heat Sink assemble.
3. U3/U4/U5/U6/U8/U9/U10/U11:
(FBGA96), Onboard DDR3L Memory.
Model
Memory
SBC-7111-E3845-2G
2GB
SBC-7111-N2930-2G
2GB (option)
SBC-7111-N2930P-CN3V-2G
2GB (option)
SBC-7111-E3815-2G
2GB (option)
SBC-7111-N2807-2G
2GB (option)
SBC-7111-E3845-4G
4GB (option)
SBC-7111-N2930-4G
4GB (option)
SBC-7111-E3845-8G
8GB (option)
SBC-7111-N2930-8G
8GB (option)
ARCHMI-8XX Series User Manual
34
4. S-422 (PIN6):
(Switch), ATX Power and Auto Power on jumper setting.
S-422(Switch)
Mode
Pin6 (Off)
Manual Power on
Pin6 (On)
Auto Power on (Default)
5. BAT1:
(1.25mm Pitch 1x2 Wafer Pin Header) 3.0V Li battery is embedded to provide
power for CMOS.
Pin#
Signal Name
1
VBAT
2
Ground
6. DC_IN1:
(5.08mm Pitch 1x3 Pin Connector), DC9~36V System power input connector.
Pin#
Power Input
1
DC+9V~36V
2
Ground
3
FG Model
DC_IN1
SBC-7111-E3845-xG
180°Connector
SBC-7111-N2930-xG
180°Connector
SBC-7111-E3815-xG
180°Connector
SBC-7111-N2807-xG
180°Connector
SBC-7111-N2930P-xG
45°Connector
SBC-7111-E3845P-XG
45°Connector
SBC-7111-N2930P-CN3V-XG
45°Connector
7. DC_IN2:
(2.0mm Pitch 1x4 wafer Pin Header) DC12V POE power input connector.
Pin#
Signal Name
1
VCC_BAT
2
VCC_BAT
3
Ground
4
Ground
ARCHMI-8XX Series User Manual
35
SBC-7111 R2.XX
POE Module
DC_IN2
TB-528NE1U2POE/12V OUT (30W)
8. BT1/BT2/P_SW1:
Power on/off button, They are used to connect power switch button. The two
pins are disconnected under normal condition. You may short them temporarily
to realize system startup & shutdown or awaken the system from sleep state.
BT2
BT1
P_SW1
●
●
○
Default
● ○ ●
Option
9. FAN1(option):
(2.54mm Pitch 1x3 Pin Header), Fan connector, cooling fans can be connected
directly for use. You may set the rotation condition of cooling fan in menu of
BIOS CMOS Setup.
Pin#
Signal Name
1
Ground
2
VCC
3
Rotation detection
Note:
Output power of cooling fan must be limited under 5W.
10. VGA1:
(CRT 2.0mm Pitch 2x6 Pin Header), Video Graphic Array Port, Provide 2x6Pin
cable to VGA Port.
Signal Name
Pin#
Pin#
Signal Name
CRT_RED
1 2 Ground
CRT_GREEN
3 4 Ground
CRT_BLUE
5 6 VGA_EN
CRT_H_SYNC
7 8 CRT_DDCDATA
CRT_V_SYNC
9
10
CRT_DDCCLK
Ground
11
12
Ground
ARCHMI-8XX Series User Manual
36
VGA hot plug setting:
VGA1 (Pin Header)
Function
Pin4-Pin6 (Close)
VGA Simulation Disabled
Pin4-Pin6 (Open)
VGA Simulation Enabled
Use the 2.0mm jumper cap to close pin4 and pin6
11. HDMI1:
(HDMI 19P Connector), High Definition Multimedia Interface connector.
12. JP6:
(2.0mm Pitch 2x2 Pin Header), LVDS jumper setting.
JP6
Function (CN1)
Pin1-Pin2 (Close)
Single channel LVDS
Pin1-Pin2 (Open)
Dual channel LVDS (Default)
Pin3-Pin4 (Close)
8/24 bit (Default)
Pin3-Pin4 (Open)
6/18 bit
13. U18:
AT24C02-DIP8,The EEPROM IC（U18）is the set of LVDS resolution. If you need
other resolution settings, please upgrade U18 data.
Model
LVDS resolution
SBC-7111-E3845-2G
SBC-7111-E3845-4G
SBC-7111-N2930-2G
SBC-7111-E3845-4G
SBC-7111-E3815-2G
1280*1024 (Default)
800*480 (option)
800*600 (option)
1024*768 (option)
1920*1080 (option)
14. INVT1:
(2.0mm Pitch 1x6 wafer Pin Header), Backlight control connector for LVDS.
ARCHMI-8XX Series User Manual
37
Pin#
Signal Name
1
+DC12V
2
+DC12V
3
Ground
4
Ground
5
BKLT_EN_OUT
6
BKLT_CTRL
15. CN1:
(1.25mm Pitch 2x20 Connector, DF13-40P), for 18/24-bit LVDS output connector,
fully supported by Parad PS8625(DP to LVDS), the interface features dual
channel 24-bit output. Low Voltage Differential Signaling, A high speed, low
power data transmission standard used for display connections to LCD panels.
Function
Signal Name
Pin#
Pin#
Signal Name
Function
LVDS
12V_S0
2 1 12V_S0
LVDS
BKLT_EN_OUT
4 3 BKLT_CTRL
Ground
6 5 Ground
LVDS_VDD5
8 7 LVDS_VDD5
LVDS_VDD3
10 9 LVDS_VDD3
Ground
12
11
Ground
LA_D0_P
14
13
LA_D0_N
LA_D1_P
16
15
LA_D1_N
LA_D2_P
18
17
LA_D2_N
LA_D3_P
20
19
LA_D3_N
LA_CLKP
22
21
LA_CLKN
LB_D0_P
24
23
LB_D0_N
LB_D1_P
26
25
LB_D1_N
LB_D2_P
28
27
LB_D2_N
LB_D3_P
30
29
LB_D3_N
LB_CLKP
32
31
LB_CLKN
Ground
34
33
Ground
E3_USB8
(USB2.0)
D3_USB3
(USB2.0)
E3_USB8_P
36
35
E3_USB8_N
5V_S5_USB
38
37
5V_S5_USB
Power LED
PWR_LED+
40
39
Ground
Power LED
ARCHMI-8XX Series User Manual
38
16. JP4:
(2.0mm Pitch 2x2 wafer Pin Header), Touch jumper setting.
JP4
Touch (TCH1)
Close 1-2 (default)
-
Open 3-4 (default)
-
Close 3-4 (option)
Hardware Enabled
17. TCH1:
(2.0mm Pitch 1x6 wafer Pin Header), internal Touch controller connector.
Pin#
Signal Name
1
SENSE
2
X+ 3 X- 4 Y+ 5 Y-
6
GND_EARCH
18. JP1:
(2.0mm Pitch 2x3 Pin Header), COM1 jumper setting, pin 1~6 are used to select
signal out of pin 9 of COM1 port.
JP1 Pin#
Function
Close 1-2
COM1 RI (Ring Indicator) (default)
Close 3-4
COM1 Pin9: DC+5V (option)
Close 5-6
COM1 Pin9: DC+12V (option)
19. S_232:
(Switch), COM1 jumper setting, it provides selectable RS232 or RS422 or RS485
serial signal output.
Function
S_232 Pin#
RS232 (Default)
ON: Pin1, Pin2, Pin3, Pin4
RS422 (option)
OFF: Pin1, Pin2, Pin3, Pin4
RS485 (option)
OFF: Pin1, Pin2, Pin3, Pin4
20. S_422:
(Switch), COM1 setting, it provides selectable RS232 or RS422 or RS485 serial
signal output.
ARCHMI-8XX Series User Manual
39
Function
S_422 Pin#
RS232 (Default)
OFF: Pin1, Pin2, Pin3, Pin4, Pin5
RS422 (option)
ON: Pin1, Pin2, Pin3, Pin4, Pin5
RS485 (option)
ON: Pin1, Pin2, Pin3, Pin4, Pin5
S-422
Mode
Pin6 (Off)
Manual Power on
Pin6 (On)
Auto Power on (Default)
21. COM1:
(Type DB9M), Rear serial port, standard DB9 Male serial port is provided to
make a direct connection to serial devices. COM1 port is controlled by pins
No.1~6 of JP1, select output Signal RI or 5V or 12V, for details, please refer to
description of JP1 and S_232 and S_422 setting.
RS232 (Default)
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP1 select Setting (RI/5V/12V)
BIOS Setup:
Advanced/F81216SEC Super IO Configuration/Serial Port 1 Configuration 【RS-232】
RS422 (option)
Pin#
Signal Name
1
422_RX+
2
422_RX-
3
422_TX-
4
422_TX+
ARCHMI-8XX Series User Manual
40
5
Ground
6
NC 7 NC 8 NC 9 NC
BIOS Setup:
Advanced/F81216SEC Super IO Configuration/Serial Port 1 Configuration 【RS-422】
RS485 (option)
Pin#
Signal Name
1
NC 2 NC 3 485-
4
485+
5
Ground
6
NC 7 NC 8 NC 9 NC
BIOS Setup:
Advanced/F81216SEC Super IO Configuration/Serial Port 1 Configuration 【RS-485】
22. JP2:
(2.0mm Pitch 2x3 Pin Header), COM2 jumper setting, pin 1~6 are used to select
signal out of pin 9 of COM2 port.
JP2 Pin#
Function
Close 1-2
COM2 RI (Ring Indicator) (default)
Close 3-4
COM2 Pin9: DC+5V (option)
Close 5-6
COM2 Pin9: DC+12V (option)
23. COM2:
(Type DB9M),Rear serial port, standard DB9 Male serial port is provided to
make a direct connection to serial devices.
ARCHMI-8XX Series User Manual
41
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP2 select Setting (RI/5V/12V)
24. LED1, LED2 (option) :
LED1: LED STATUS. Green LED for Power Good status.
LED2: LED STATUS. Green LED for Touch Power Status.
LED3: LED STATUS. Green LED for EC Power status.
LED4: LED STATUS. Green LED for Motherboard Standby Power Good status.
25. SATA_P(option):
(2.5mm Pitch 1x2 box Pin Header), One onboard 5V output connector are
reserved to provide power for SATA devices.
Pin#
Signal Name
1
+DC5V
2
Ground
Note:
Output current of the connector must not be above 1A.
26. SATA2(option):
(SATA 7Pin), SATA Connectors, one SATA connector are provided, with transfer
speed up to 3.0Gb/s.
27. SATA1:
(SATA 7Pin+15Pin), SATA Connectors, one SATA connector are provided, with
transfer speed up to 3.0Gb/s.
28. SD1:
(SD card slot), Secure Digital Memory Card socket.
ARCHMI-8XX Series User Manual
42
29. MPCIE1:
(Socket 52Pin), mini PCIe socket, it is located at the top, it supports mini PCIe devices
with USB2.0 and LPC and SMBUS and PCIe signal. MPCIe card size is 30x50.95mm.
30. H1/H2:
MPCIE1 SCREW HOLES, H1and H2 for mini PCIE card (30mmx50.95mm)
assemble.
31. F_AUDIO1:
(2.0mm Pitch 2X6 Pin Header), Front Audio, An onboard Realtek ALC662-VD
codec is used to provide high-quality audio I/O ports. Line Out can be
connected to a headphone or amplifier. Line In is used for the connection of
external audio source via a Line in cable. MIC is the port for microphone input
audio.
Signal Name
Pin#
Pin#
Signal Name
+5V
1 2 GND_AUD
LINE-OUT-L
3 4 LINE-OUT-R
FRONT_JD
5 6 LINE1_JD
LINE_IN-L
7 8 LINE-IN-R
MIC-IN-L
9
10
MIC-IN-R
GND-AUD
11
12
MIC1_JD
32. LINE_OUT1:
(Diameter 3.5mm Jack), HD Audio port, an onboard Realtek ALC662-VD codec
is used to provide high quality audio I/O ports. Line Out can be connected to a
headphone or amplifier.
33. USB3:
USB3-5/USB3-6: (Double stack USB type A), Rear USB connector, it provides up
to two USB3.0 port, support USB full-speed and low-speed signaling.
Each USB Type A Receptacle (2 Ports) Current limited value is 2.0A.
If the external USB device current exceeds 2.0A, please separate connectors
into different Receptacle.
ARCHMI-8XX Series User Manual
43
34. LAN1/LAN2:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M
RJ-45 Ethernet ports are provided. Used intel 82574L chipset, LINK LED (green)
and ACTIVE LED (yellow) respectively located at the left-hand and right-hand
side of the Ethernet port indicate the activity and transmission state of LAN.
35. BUZ1:
Onboard buzzer.
36. CN2:
(DF13-30P Connector) For expand output connector, It provides eight GPIO,
one RS422 or RS485, one USB2.0, one Power on/off, one Reset.
Function
Signal Name
Pin#
Pin#
Signal Name
Function
5V
5V_S5
2 1 5V_S5
5V
SOC_GPIO10
GPIO_IN2
4 3 GPIO_IN1
SOC_SPIO09
SOC_GPIO26
GPIO_IN4
6 5 GPIO_IN3
SOC_GPIO17
SOC_GPIO05
GPIO_OUT2
8 7 GPIO_OUT1
SOC_GPIO04
SOC_GPIO08
GPIO_OUT4
10 9 GPIO_OUT3
SOC_GPIO06
Ground
12
11
Ground
485 or 422
485+_422TX+
14
13
485-_422TX5-
485 or 422
RS422
422_RX+
16
15
422_RX5-
RS422
485 or 422
485+_422TX6+
18
17
485-_422TX6-
485 or 422
RS422
422_RX6+
20
19
422_RX6-
RS422
5V
5V_S0
22
21
HDD_LED+
HDD LED
USB2.0
5V_USB09
24
23
5V_USB01
USB2.0
E_USB9_P
26
25
E_USB9_N
Ground
28
27
FP_RST-
RESET
Power auto on
PWRBTN_ON
30
29
Ground
COM5/COM6 BIOS Setup：
Advanced/IT8518Super IO Configuration/Serial Port 1 Configuration【RS-485】
Advanced/IT8518Super IO Configuration/Serial Port 1 Configuration【RS-422】
Advanced/IT8518Super IO Configuration/Serial Port 2 Configuration【RS-485】
Advanced/IT8518Super IO Configuration/Serial Port 2 Configuration【RS-422】
37. EC_GPIO1:
(2.0mm Pitch 1X10 Pin Header)For expand connector, it provides brightness adjustment
function
ARCHMI-8XX Series User Manual
44
Pin#
Signal Name
1
Ground
2
GPA0_ONOFF
3
GPA1_SPK-
4
GPE6_BKLT-
5
GPE0_BKLT+
6
SPKGPC3_SPK+
7
BKL_CTRL_PWR
8
ADC6_BKLT_CTRL
9
ADC7_L_SENSE
10
3.3V
38. CN3:
(1.27mm Pitch 2X30 Female Header), for expand output connector, it provides
four GPIO, two USB 2.0,one PS/2 mouse, one PS/2 keyboard, two uart, one
PCIex1, one SMbus. connected to the TB-528 riser Card.
Function
Signal Name
Pin#
Pin#
Signal Name
Function
5V_S5_USB
1 2 5V_S5_USB
5V_S5_USB
3 4 5V_S5_USB
USB1011_OC
5 6 PSON_ATX-
E-USB10
E_USB10_N
7 8 E_USB10_P
E-USB10
E-USB11
E_USB11_N
9
10
E_USB11_P
E-USB11
Ground
11
12
Ground
PS/2 MS
PS2_MSCLK
13
14
PS2_MSDATA
PS/2 MS
PS/2 KB
PS2_KBCLK
15
16
PS2_KBDATA
PS/2 KB
COM4
(UART)
COM4_RI
17
18
COM4_DCD-
COM4
(UART)
COM4_TXD
19
20
COM4_RXD
COM4_DTR
21
22
RICOM4_RTS-
COM4_DSR
23
24
COM_CTS-
Ground
25
26
Ground
COM3
(UART)
COM3_RI
27
28
COM3_DCD-
COM3
(UART)
COM3_TXD
29
30
COM3_RXD
COM3_DTR
31
32
DSRCOM3_RTS-
COM3_DSR
33
34
DTRCOM3_CTS-
GPIO23
SOC_GPIO23
35
36
ICH_GPIO22
GPIO12
GPIO25
SOC_GPIO25
37
38
ICH_GPIO24
GPIO24
Ground
39
40
Ground
ARCHMI-8XX Series User Manual
45
PCIE
PCIE_TX0_DN
41
42
PCIE_TX0_DP
PCIE
PCIE_RX0_DN
43
44
PCIE_RX0_DP
Ground
45
46
Ground
PCIE_REFCLK0_DN
47
48
PCIE_REFCLK0_DP
PCIE0_WAKE_N
49
50
PLTRST_3P3_N
SMBUS
SMB_CLK_S0
51
52
SMB_DATA_S0
SMBUS
PCIE
PCIE_CLKREQ0_N
53
54
Ground
3P3V_S5
55
56
PWRBTN_ON-
Power Auto on
3P3V_S5
57
58
3P3V_S5
12V
12V_S0
59
60
12V_S0
12V
ARCHMI-8XX Series User Manual
46
Chapter 3 BIOS Setup
3.1 Operations after POST Screen
After CMOS discharge or BIOS flashing operation, press [Delete] key to enter CMOS
Setup.
After optimizing and exiting CMOS Setup, the POST screen displayed for the first time
is as follows and includes basic information on BIOS, CPU, memory, and storage
devices.
3.2 BIOS Setup Utility
Press [Delete] key to enter BIOS Setup utility during POST, and then a main menu
containing system summary information will appear.
ARCHMI-8XX Series User Manual
47
3.3 Main Settings
System Time:
Set the system time, the time format is:
Hour : 0 to 23
Minute : 0 to 59
ARCHMI-8XX Series User Manual
48
Second : 0 to 59
System Date:
Set the system date, the date format is:
Day: Note that the ‘Day’ automatically changes when you set the date.
Month: 01 to 12
Date: 01 to 31
Year: 1998 to 2099
3.4 Advanced Settings
3.4.1 ACPI Settings
Enable ACPI Auto Conf:
[Disabled]
[Enabled]
Enable Hibernation:
ARCHMI-8XX Series User Manual
49
[Enabled]
[Disabled]
ACPI Sleep State:
[S3 (Suspend to RAM) ]
[Suspend Disabled]
Lock Legacy Resources:
[Disabled]
[Enabled]
3.4.2 F81216SEC Super IO Configuration
Super IO chip F81216SEC
Serial Port 1 Configuration
UART1 Mode Selection：
[RS-232]
[RS-485]
[RS-422]
Serial Port 2 Configuration
Change Settings [Auto]
Serial Port 3 Configuration
Change Settings [Auto]
Serial Port 4 Configuration
Change Settings [Auto]
3.4.3 IT8518 Super IO Configuration
Super IO chip IT8518/IT8519
Serial Port 1 Configuration
Backlight PWM Controller（COM5）：
[RS-485]
[RS-422]
Serial Port 2 Configuration (COM6)
Change Settings [Auto]
3.4.4 Intel（R）Smart Connect Technology
ISCT Support
[Disabled]
[Enabled]
ARCHMI-8XX Series User Manual
50
3.4.5 Serial Port Console Redirection
COM0
Console Redirection
[Disabled]
[Enabled]
Console Redirection Settings
Legacy Console Redirection
Legacy Console Redirection settings
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection
[Disabled]
[Enabled]
Console Redirection Settings
3.4.6 CPU Configuration
Socket 0 CPU Information
Intel(R) Atom(TM) CPU E3845 @ 1.91GHz
CPU Signature
30679
Microcode Patch
901
Max CPU Speed
1910 MHz
Mix CPU Speed
500 MHz
Processor Cores
4
Intel HT Technology
Not Supported
Intel HT-X Technology
Supported
L1 Data Cache
24KB x 4
L1 Code Cache
32KB x 4
L2 Cache
1024KB x 2
L2 Cache
Not Present
CPU Thermal configuration
CPU Speed 1918 MHz
64-bit Supported
Hyper-Threading:
[Enabled]
[Disabled]
ARCHMI-8XX Series User Manual
51
Limit CPUID Maximum:
[Disabled]
[Enabled]
Execute Disable Bit:
[Enabled]
[Disabled]
Intel Virtualization Technology:
[Enabled]
[Disabled]
Power Technology
[Energy Efficient]
[Disabled]
[Custom]
3.4.7 PPM Configuration
CPU C State Report
[Enabled]
[Disabled]
Max CPU C-state
[C7]
[C6]
[C1]
SOix
[Disabled]
[Enabled]
3.4.8 Thermal Configuration Parameters
3.4.9 IDE Configuration
Serial-ATA(SATA)
[Enabled]
[Disabled]
SATA Test Mode
[Disabled]
[Enabled]
SATA Speed Support
[Gen2]
[Gen1]
ARCHMI-8XX Series User Manual
52
SATA ODD Port
[No ODD]
[Porto ODD]
[Port1 ODD]
[Disabled]
SATA Mode
[AHCI Mode]
[IDE Mode]
Serial-ATA Port 0
[Enabled]
[Disabled]
SATA Port0 Hotplug
[Disabled]
[Enabled]
Serial-ATA Port 1
[Enabled]
[Disabled]
SATA Port1 Hotplug
[Disabled]
[Enabled]
SATA Port0
Not Present
SATA Port1
Not Present
3.4.10 Miscellaneous Configuration
ARCHMI-8XX Series User Manual
53
High Precision Timer
[Enabled]
[Disabled]
Boot Timer with HPET Timer
[Disabled]
[Enabled]
PCI Express Dynamic Clock Gating
[Disabled]
[Enabled]
OS Selection
Use the OS Selection option to select an operating system for the system.
Note:
Users must go to this item to select the OS mode before installing corresponding
OS driver, otherwise problems will occur when installing the driver.
3.4.11 LPSS & SCC Configuration
LPSS & SCC Configuration
[ACPI Mode]
SCC Configuration
SCC eMMC Support
[eMMC AUTO MODE]
SCC eMMC 4.5 DDR50 Support
[Enabled]
SCC eMMC 4.5 HS200 Support
[Disabled]
eMMC Secure Erase
[Disabled]
SCC SDIO Support
[Enabled]
SCC SD Card Support
[Enabled]
SDR25 Support for SDCard
[Disabled]
SDR50 Support for SDCard
[Enabled]
MIPI HSI Support
[Disabled]
LPSS Configuration
LPSS DMA #1 Support
[Enabled]
LPSS DMA #2 Support
[Enabled]
LPSS I2C #1 Support
[Enabled]
LPSS I2C #2 Support
[Enabled]
LPSS I2C #3 Support
[Enabled]
LPSS I2C #4 Support
[Enabled]
ARCHMI-8XX Series User Manual
54
LPSS I2C #5 Support
[Enabled]
LPSS I2C #6 Support
[Enabled]
LPSS I2C #7 Support
[Enabled]
NFC
[Disabled]
Touch Pad
[Disabled]
I2C touch Device Address
LPSS HSUART #1 Support
[Disabled]
LPSS HSUART #2 Support
[Disabled]
LPSS PWM #1 Support
[Enabled]
LPSS PWM #2 Support
[Enabled]
LPSS SPI Support
[Enabled]
3.4.12 System Component
3.4.13 Network Stack Configuration
Network Stack [Disabled]
3.4.14 CSM Configuration
CSM Support
[Enabled]
CSM16 Module Version
07.76
GateA20 Active
[Upon Request]
[Always]
Option ROM Messages
[Force BIOS]
[Keep Current]
Boot option filter
[UEFI and Legacy]
[Legacy only]
[UEFI only]
Network
[UEFI]
[Do not launch]
[Legacy]
Storage
[UEFI]
[Do not launch]
[Legacy]
Video
[Legacy]
[UEFI]
ARCHMI-8XX Series User Manual
55
[Do not launch]
Other PCI devices
[UEFI]
[Do not launch]
[Legacy]
3.4.15 SDIO Configuration
3.4.16 USB Configuration
USB Configuration
USB Module Version 8.11.02
USB Devices:
1 keyboard, 1 Mouse，2 Hubs
Legacy USB Support:
[Enabled]
[Disabled]
XHCI Hand-off:
[Enabled]
[Disabled]
EHCI Hand-off:
[Disabled]
[Enabled]
USB Mass Storage Driver Support
[Enabled]
[Disabled]
USB hardware delays and time-outs：
USB transfer time-out:
[20 sec]
[10 sec]
[5 sec]
[1 sec]
Device reset time-out:
[20 sec]
[10 sec]
[30 sec]
[40 sec]
Device power-up delay
[Auto]
[Manual]
ARCHMI-8XX Series User Manual
56
3.4.17 Platform Trust Technology
3.4.18 Security Configuration
3.5 Chipset Settings
3.5.1 Host Bridge
►Intel IGD Configuration
►IGD – LCD Control
Force Lid Status
[On]
[Off]
BIA
[Auto]
ALS Support
[Disabled]
IGD Flat Panel
[Auto]
Pannel Scaling
[Auto]
►Memory Frequency and Timing
►Graphics Power Management Control
Memory Information
Total Memory
4096 MB(DDR3L)
Memory Slot0
4096 MB(DDR3L)
DIMM#1
Not Present
ARCHMI-8XX Series User Manual
57
Max TOLUD
[Dynamic]
[2GB]
[2.25GB]
[2.5GB]
[2.75GB]
[3GB]
3.5.2 South Bridge
►Azalia HD Audio
►USB Configuration
USB OTG Support
[Disabled]
USB VBUS
[On]
XHCI Mode
[Smart Auto]
USB2 Link Power Management
[Enabled]
USB 2.0(EHCI) Support
[Enabled]
USB EHCI debug
[Disabled]
USB Per Port Control
[Enabled]
USB Port 0
[Enabled]
USB Port 1
[Enabled]
USB Port 2
[Enabled]
USB Port 3
[Enabled]
ARCHMI-8XX Series User Manual
58
3.6 Security Settings
3.6.1 Administrator Password
3.6.2 User Password
Type the password with up to 20 characters and then press Enter key. This will
clear all previously typed CMOS passwords. You will be requested to confirm the
password. Type the password again and press Enter key. You may press Esc
key to abandon password entry operation.
To clear the password, just press Enter key when password input window pops
up. A confirmation message will be shown on the screen as to whether the password
ARCHMI-8XX Series User Manual
59
will be disabled. You will have direct access to BIOS setup without typing any
password after system reboot once the password is disabled.
Once the password feature is used, you will be requested to type the password each
time you enter BIOS setup. This will prevent unauthorized persons from changing
your system configurations.
Also, the feature is capable of requesting users to enter the password prior to
system boot to control unauthorized access to your computer. Users may enable the
feature in Security Option of Advanced BIOS Features. If Security Option is set to
System, you will be requested to enter the password before system boot and when
entering BIOS setup; if Security Option is set to Setup, you will be requested for
password for entering BIOS setup.
3.7 Boot Settings
Setup Prompt Timeout [1]
Bootup Numlock State
[On]
[off]
Quiet Boot
[Disabled]
ARCHMI-8XX Series User Manual
60
[Enabled]
Fast Boot
[Disabled]
[Enabled]
Boot Option Priorities
Boot Option #1
Sets the system boot order
Hard Drive BBS Priorities [SATA PM:*** … ]
Boot Option #1
SATA PM:***…
******
Disabled
3.8 Save & Exit Settings
Save Changes and Exit
Save & Exit Setup save Configuration and exit ?
[Yes]
[No]
ARCHMI-8XX Series User Manual
61
Discard Changes and Ext
Exit Without Saving Quit without saving?
[Yes]
[No]
Save Changes and Reset
Save & reset Save Configuration and reset?
[Yes]
[No]
Discard Changes and Reset
Reset Without Saving Reset without saving?
[Yes]
[No]
Save Changes
Save Setup Values Save configuration?
[Yes]
[No]
Discard Changes
Load Previous Values Load Previous Values?
[Yes]
[No]
Restore Defaults
Load Optimized Defaults Load optimized Defaults?
[Yes]
[No]
Save user Defaults
Save Values as User Defaults Save configuration?
[Yes]
[No]
Restore user Defaults
Restore User Defaults Restore User Defaults?
[Yes]
[No]
Launch EFI Shell from filesystem device
WARNING Not Found
[ok]
Reset System with ME disable ModeMEUD000
ME will runs into the temporary disable mode, Ignore if ME Ignition
FWMEUD001.
ARCHMI-8XX Series User Manual
62
Chapter 4 Installation of Drivers
This chapter describes the installation procedures for software and drivers under the
windows 7. The software and drivers are included with the motherboard. The
contents include Intel chipset driver, VGA driver, LAN drivers, Audio driver, USB 3.0
Driver, and Com Driver Installation instructions are given below.
Important Note:
After installing your Windows operating system, you must install first the Intel
Chipset Software Installation Utility before proceeding with the installation of
drivers.
ARCHMI-8XX Series User Manual
63
4.1 Intel(R) AtomTM SoC Chipset
To install the Intel chipset driver, please follow the steps below.
Step 1. Select Intel (R) AtomTM SoC Chipset from the list
Step 2. Click Next to setup program.
ARCHMI-8XX Series User Manual
64
Step 3. Read the license agreement. Click Yes to accept all of the terms of the
license agreement.
Step 4. Click Next to continue.
ARCHMI-8XX Series User Manual
65
Step 5. Click Next.
Step 6. Select Yes, I want to restart this computer now. Click Finish, then remove
any installation media from the drives.
ARCHMI-8XX Series User Manual
66
4.2 Intel(R) VGA Chipset
To install the VGA drivers, follow the steps below to proceed with the installation.
Step 1.Select Intel(R) VGA Chipset
Step 2. Click Automatically run WinSAT and enable the Windows Aero desktop
theme(if supported). Click Next.
ARCHMI-8XX Series User Manual
67
Step 3. Read license agreement. Click Yes.
Step 4. Click Next.
ARCHMI-8XX Series User Manual
68
Step 5. Click Install.
Step 6. Click Install.
ARCHMI-8XX Series User Manual
69
Step 7. Click Next.
Step 8. Click Yes, I want to restart this computer now. Then click Finish.
ARCHMI-8XX Series User Manual
70
4.3 Intel(R) LAN Driver
To install the Intel (R) LAN driver, please follow the steps below.
Step 1. Select Intel(R) 82574L LAN Driver from the list.
Step 2. . Click Next.
ARCHMI-8XX Series User Manual
71
Step 3. Read license agreement. Click I accept the terms in the license agreement.
Click Next.
Step 4. Click Next to continue.
ARCHMI-8XX Series User Manual
72
Step 5. Click Install to begin the installation.
Step 6. Click Finish to exit the wizard.
ARCHMI-8XX Series User Manual
73
4.4 Realtek ALC662 HD Audio Driver Installation
To install the Realtek ALC662 HD Audio Driver, please follow the steps below.
Step 1. Select Realtek AL662 HD Audio Driver from the list
Step 2. Click Next to continue.
ARCHMI-8XX Series User Manual
74
Step 3. Click Yes, I want to restart my computer now. Click Finish to complete the
installation.
4.5 USB 3.0 Driver
To install the USB 3.0 Driver, please follow the steps below.
Step 1. Select USB 3.0 Driver from the list
ARCHMI-8XX Series User Manual
75
Step 2. Click Next to continue.
Step 3. Read the license agreement. Then click Yes to continue.
ARCHMI-8XX Series User Manual
76
Step 4. Click Next to continue.
Step 5. Click Next to continue.
ARCHMI-8XX Series User Manual
77
Step 6. Select Yes, I want to restart this computer now. Then click Finish to complete
the installation.
4.6 Com Driver
To install the Com Driver, please follow the steps below.
Step 1. Select Com Driver from the list
ARCHMI-8XX Series User Manual
78
Step 2. Click Next to continue.
Step 3. Click install to begin the installation.
ARCHMI-8XX Series User Manual
79
Step 4. Click Finish to complete the installation.
ARCHMI-8XX Series User Manual
80
Chapter 5 Touch Screen Installation
This chapter describes how to install drivers and other software that will allow your
touch screen work with different operating systems.
5.1 Windows XP/2003/Vista/7 Universal Driver
Installation for PenMount 6000 Series
Before installing the Windows XP/2003/Vista/7 driver software, you must have the
Windows XP/2003/Vista/7 system installed and running on your computer. You must
also have one of the following PenMount 6000 series controller or control boards
installed: PM6500, PM6300.
5.1.1 Installing Software(Resistive Touch)
If you have an older version of the PenMount Windows 7 driver installed in your
system, please remove it first. Follow the steps below to install the PenMount
DMC6000 Windows 7 driver.
Step 1. Insert the product CD, the screen below would appear. Click Touch Panel
Driver.
ARCHMI-8XX Series User Manual
81
Step 2. Select Resistive Touch.
Step 3. Click Next to continue.
ARCHMI-8XX Series User Manual
82
Step 4. Read the license agreement. Click I Agree to agree the license agreement.
Step 5. Choose the folder in which to install PenMount Windows Universal Driver.
Click Install to start the installation.
ARCHMI-8XX Series User Manual
83
Step 6. Click Yes to continue.
Step 7. Click Finish to complete installation.
ARCHMI-8XX Series User Manual
84
5.1.2 Installing Software (Projected Capacitive)
Step 1. Insert the product CD, the screen below would appear. Click touch panel
driver.
Step 2. Select Projected Capacitive.
ARCHMI-8XX Series User Manual
85
Step 3. Click Next to continue.
Step 4. Select I accept the terms of the license agreement. Click Next.
ARCHMI-8XX Series User Manual
86
Step.5. Click Next to continue.
Step 6. Click Install RS232 interface driver.
ARCHMI-8XX Series User Manual
87
Step 7. Select None. Click Next.
Step 8. Click OK.
Step 9. Click Support Muti-Monitor System. Click Next.
ARCHMI-8XX Series User Manual
88
Step 10. Go to C:\Program Files\eGalaxTouch. Click Next.
Step 11. Click Next.
ARCHMI-8XX Series User Manual
89
Step 12. Click Create a eGalaxTouch Utility shortcut on desktop. Click Next.
Step 13. Wait for installation.
Step 14. Click Yes to do 4 point calibration.
ARCHMI-8XX Series User Manual
90
5.2 Software Functions
5.2.1 Software Functions(Resistive Touch)
Upon rebooting, the computer automatically finds the new 6000 controller board.
The touch screen is connected but not calibrated. Follow the procedures below to
carry out calibration.
1. After installation, click the PenMount Monitor icon “PM” in the menu bar.
2. When the PenMount Control Panel appears, select a device to “Calibrate.”
PenMount Control Panel(Resistive Touch)
The functions of the PenMount Control Panel are Device, Multiple Monitors ,Tools
and About, which are explained in the following sections.
Device
In this window, you can find out that how many devices be detected on your system.
Calibrate
This function offers two ways to calibrate your touch screen. ‘Standard Calibration’
adjusts most touch screens. ‘Advanced Calibration’ adjusts aging touch screens.
ARCHMI-8XX Series User Manual
91
Standard Calibration
Click this button and arrows appear pointing to red
squares. Use your finger or stylus to touch the red
squares in sequence. After the fifth red point calibration
is complete. To skip, press ‘ESC’.
Advanced Calibration
Advanced Calibration uses 4, 9, 16 or 25 points to
effectively calibrate touch panel linearity of aged touch
screens. Click this button and touch the red squares in
sequence with a stylus. To skip, press ESC’.
Step 1. Please select a device then click “Configure”. You can also double click the device too.
ARCHMI-8XX Series User Manual
92
Step 2.Click “Standard Calibration” to start calibration procedure
NOTE: The older the touch screen, the more Advanced Mode calibration points
you need for an accurate calibration. Use a stylus during Advanced Calibration for
greater accuracy. Please follow the step as below:
ARCHMI-8XX Series User Manual
93
Step 3. Select Device to calibrate, then you can start to do Advanced Calibration.
NOTE: Recommend to use a stylus during Advanced Calibration for greater accuracy.
Plot Calibration Data
Check this function and a touch panel linearity
comparison graph appears when you have finished
Advanced Calibration. The blue lines show linearity
before calibration and black lines show linearity after
calibration.
Turn off EEPROM
storage
The function disable for calibration data to write in
Controller. The default setting is Enable.
ARCHMI-8XX Series User Manual
94
Setting
Touch Mode
This mode enables and disables the mouse’s ability to drag
on-screen icons – useful for configuring POS terminals.
Mouse Emulation – Select this mode and the mouse
functions as normal and allows dragging of icons.
Click on Touch – Select this mode and mouse only provides a
click function, and dragging is disables.
Beep Sound
Enable Beep Sound – turns beep function on and off
Beep on Pen Down – beep occurs when pen comes down
Beep on Pen Up – beep occurs when pen is lifted up
Beep on both – beep occurs when comes down and lifted up
Beep Frequency – modifies sound frequency
Beep Duration – modifies sound duration
Cursor Stabilizer
Enable the function support to prevent cursor shake.
Use press and
hold as right click
You can set the time out and area for you need.
ARCHMI-8XX Series User Manual
95
Edge Compensation
You can use Edge Compensation to calibrate more subtly.
ARCHMI-8XX Series User Manual
96
About
This panel displays information about the PenMount controller and driver version.
Multiple Monitors
Multiple Monitors support from two to six touch screen displays for one system. The
PenMount drivers for Windows XP/2003/Vista/7 support Multiple Monitors. This
function supports from two to six touch screen displays for one system. Each
monitor requires its own PenMount touch screen control board, either installed
inside the display or in a central unit. The PenMount control boards must be
connected to the computer COM ports via the USB interface. Driver installation
procedures are the same as for a single monitor. Multiple Monitors support the
following modes:
Windows Extends Monitor Function
Matrox DualHead Multi-Screen Function
nVidia nView Function
NOTE: The Multiple Monitor function is for use with multiple displays only. Do not
use this function if you have only one touch screen display. Please note once you
turn on this function the rotating function is disabled.
Enable the multiple display function as follows:
ARCHMI-8XX Series User Manual
97
1. Check the Enable Multiple Monitor Support box; then click Map Touch Screens
to assign touch controllers to displays.
2. When the mapping screen message appears, click OK.
3. Touch each screen as it displays “Please touch this monitor”. Following this
sequence and touching each screen is called mapping the touch screens.
4. To uching all screens completes the mapping and the desktop reappears on the
monitors.
5. Select a display and execute the “Calibration” function. A message to start
calibration appears. Click OK.
ARCHMI-8XX Series User Manual
98
6. “Touch this screen to start its calibration” appears on one of the screens. Touch
the screen.
7. “Touch the red square” messages appear. Touch the red squares in sequence.
8. Continue calibration for each monitor by clicking Standard Calibration and
touching the red squares.
NOTES:
1. If you use a single VGA output for multiple monitors, please do not use the
Multiple Monitor function. Just follow the regular procedure for calibration on
each of your desktop monitors.
2. The Rotating function is disabled if you use the Multiple Monitor function.
3. If you change the resolution of display or screen address, you have to redo Map
Touch Screens, so the system understands where the displays are.
About
This panel displays information about the PenMount controller and this driver version.
PenMount Monitor Menu Icon
The PenMount monitor icon (PM) appears in the menu bar of Windows
XP/2003/Vista/7 system when you turn on PenMount Monitor in PenMount Utilities.
ARCHMI-8XX Series User Manual
99
PenMount Monitor has the following function
Control Panel
Open Control Panel Windows
Beep
Setting Beep function for each device
Right Button
When you select this function, a mouse icon appears in
the right-bottom of the screen.
Click this icon to switch between Right and Left Button
functions.
Exit
Exits the PenMount Monitor function.
Configuring the Rotate Function
1. Install the rotation software package.
2. Choose the rotate function (0°, 90°, 180°, 270°) in the 3rd party software. The
calibration screen appears automatically. Touch this point and rotation is
mapped.
NOTE: The Rotate function is disabled if you use Monitor Mapping
Loading...