Aplex ARCHMI-912 User Manual
ARCHMI-9XX Series
12.1”, 15”, 15.6”, 17”, 18.5”, 21.5” Intel 4th Gen. Core i3,
Fanless Industrial Compact Size Panel PC
User Manual
Release Date Revision
Jul. 2015 V1.0
®2015 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw URL: www.aplextec.com
1
Revision History
Reversion
Date
Description
0.1
2015/04/22
For Preliminary Release
0.2
2015/05/27
Modify Motherboard Description
1.0
2015/07/21
Official Version, add 12.1” and Mount Description
ARCHMI-9XX Series User Manual
2
Warning!________________________
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.
Electric Shock Hazard – Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
Cet équipement génère, utilise et peut émettre une énergie de
radiofréquence et s'il n'est pas installé et utilisé conformément au manuel
d'instructions, il peut provoquer des interférences dans les communications
radio. Il a été testé et approuvé conforme aux limites pour un dispositif de classe
A et selon les règles de la FCC, qui sont conçues pour fournir une protection
raisonnable contre de telles interférences dans un environnement commercial. Le
fonctionnement de cet équipement dans une zone résidentielle est susceptible
de provoquer des interférences, dans ce cas l'utilisateur, à ses propres frais, devra
faire le nécessaire pour prendre toutes les mesures requises pour corriger le
problème.
Risque de choc électrique - Ne pas faire fonctionner la machine avec son capot
arrière enlevé. Des tensions dangereuses sont élevées à l'intérieur.
Avertissement!___________________
ARCHMI-9XX Series User Manual
3
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Precaution
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect.
Les piles usagée doivent être recyclées dans la mesure du possible. La mise au
rebut des piles usagées doit resecter les réglementations locales en vigueur en
matière de protection de l'environnement.
Disclaimer
This information in this document is subject to change without notice. In no event
shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this
document or in any related materials.
ARCHMI-9XX Series User Manual
4
Packing List
Accessories (as ticked) included in this package are:
□ Adaptor
□ Driver & manual CD disc
□ Other.___________________(please specify)
ARCHMI-9XX Series User Manual
5
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆ Avoid your system from static electricity on all occasions.
◆ Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
◆ Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.
Consignes de sécurité
Suivez les messages ci-dessous pour éviter que vos systèmes contre
les dommages:
◆ Éviter votre système contre l'électricité statique sur toutes les
occasions.
◆ Évitez les chocs électriques. Ne pas toucher les composants de cette
carte lorsque la carte est sous tension. Toujours débrancher lorsque le
système n'est pas en cours d'utilisation.
◆ Couper l'alimentation électrique lorsque vous changez tous les
périphériques matériels. Par exemple, lorsque vous connectez un
cavalier ou d'installer des cartes, une forte augmentation de la
puissance peut endommager les composants électroniques ou
l'ensemble du système.
ARCHMI-9XX Series User Manual
6
Table of Contents
Revision History…………………………………………………………………………………………………….1
Warning!/Avertissement!....................................…………………………….……………………2
Caution/Precaution/Disclaimer……..………………………………………………………………………3
Packing List…………………………………….…………………………………………………....................4
Safety Precautions/Consignes de sécurité……………….…..……………………....................5
Chapter 1 Getting Started
1.1 Features……..…………………..………………………...…………………………..8
1.2 Specifications…..………………...………………………………………………….8
1.3 Dimensions……..…………………....…………………………………………….10
1.4 Brief Description of ARCHMI-9XX…..….…..……………………….……14
1.5 Installation of HDD………….…………..………..…...…………………..…..18
1.6 VESA Mounting……………….…………..………..…...…………………..…..20
1.7 Panel Mounting…..………….…………..………..…...…………………..…..20
Chapter 2 Hardware
2.1 Mainboard Introduction…………………….....…………………………....21
2.2 Specifications…………………………..…………..………………………………21
2.3 Jumpers and Connectors Location……….……………………………...25
2.4 Jumpers Setting and Connectors…………..………………………..……26
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...……..……...…………………………56
3.2 BIOS Setup Utility……………………………..………………………………….56
3.3 Main Settings…………………………………..…..………………………………57
3.4 Advanced Settings………………………………………….…………………...58
3.5 Chipset Settings…………………………….………….………………………...62
3.6 Boot Settings……..…………………………..……………….…………………..64
3.7 Security Settings…..………………….…….…………….……………………..65
3.8 Save & Exit Settings………………………..……………..…………………....66
Chapter 4 Installation of Drivers
4.1 Intel (R) CORE AMT Driver…….………....……...………….………………69
4.2 Intel (R) VGA Chipset……………………..………………………….……......71
4.3 Intel (R) LAN Driver………..……………..…………………………..………...74
4.4 Realtek ALC662 HD Audio Driver....………………………………………77
4.5 USB 3.0 Driver……………………………..……………………………………….79
ARCHMI-9XX Series User Manual
7
4.6 Intel (R) AMT Driver…………………….……………………………………….82
Chapter 5 Touch Screen Installation
5.1 Windows 7/8/8.1 Universal Driver Installation for PenMount
6000 Series…………………………………………………………………………85
5.2 Software Functions……………………..……………………………………..96
Figures
Figure 1.1: Dimensions of ARCHMI-912(P)……….……….………………………….10
Figure 1.2: Dimensions of ARCHMI-915(P)……….……….……………………….…11
Figure 1.3: Dimensions of ARCHMI-916 Resistive Touch……..………….….…11
Figure 1.4: Dimensions of ARCHMI-916 Projected Capacitive Touch…….12
Figure 1.5: Dimensions of ARCHMI-917(P)……………………………………………12
Figure 1.6: Dimensions of ARCHMI-918(P)……………………………………………13
Figure 1.7: Dimensions of ARCHMI-921(P)……………………………………………13
Figure 1.8: Front View of ARCHMI-9XX Series………………………………………14
Figure 1.9: Rear View of ARCHMI-912(P)………………………………………………15
Figure 1.10: Rear View of ARCHMI-915(P)………………….………………………..15
Figure 1.11: Rear View of ARCHMI-916(P)…………….……………………………..16
Figure 1.12: Rear View of ARCHMI-917(P)……….……………………………….….16
Figure 1.13: Rear View of ARCHMI-918(P)…………………………………………...17
Figure 1.14: Rear View of ARCHMI-921(P)…..……………………………………....17
Figure 1.15: ARCHMI Series VESA Mounting.…………………………………….…20
Figure 1.16: ARCHMI Series Panel Mounting………………………………………..20
Figure 2.1: Motherboard Dimensions…………………………………………………..24
Figure 2.2: Jumpers and Connectors Location-Board Top……………………..25
Figure 2.3: Jumpers and Connectors Location-Board Bottom……………….25
ARCHMI-9XX Series User Manual
8
Chapter 1 Getting Started
ARCHMI-912(P)
ARCHMI-915(P)
ARCHMI-916(P)
ARCHMI-917(P)
ARCHMI-918(P)
ARCHMI-921(P)
System
CPU
Onboard Intel 4th Gen. Core i3 CPU Processors
Chipset
SoC
Memory
Onboard DDR3L 1600 MHz/8GB(option)
IO Port
USB
2 x USB 3.0 type A
Serial/Parallel
1 x RS-232 DB-9, COM2
1 x RS-232/422/485 DB-9, COM1, Default RS-232
1 x HDMI Port (Reserved, no printing)
Audio
1 x Audio Line Out
LAN
2 x GbE LAN RJ-45
Power
1 x 3-pin DC Power Input terminal
1 x 2-pin connector for power on/off button
Option
2 x RS-232 DB-9 + 1 x Mini-PCIe slot via TB-528C2ME1
2 x CAN bus via TB-528CAN2
2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1 x RS-232 DB-9 via TB-528C1U2P1
2 x USB 2.0 type A via TB-528U2
Storage Space
1.1 Features
12.1” 15”/15.6”/17”/18.5”/21.5” Industrial Compact Size Panel PC
Flat front panel touch screen
Fanless design
Intel 4th Gen. Core i3 CPU built-in
Onboard 4GB DDR 3L 1600 MHz/8GB(option)
9~36VDC wide-ranging power input
IP65 compliant front panel
Optional projected capacitive touchscreen support 7H anti-scratch surface
1.2 Specifications
ARCHMI-9XX Series User Manual
ARCHMI-9XX Series User Manual
9
Storage
1 x SD card slot, up to 32GB
1 x 2.5” SATA HDD bay for SATA HDD (Easy Accessible)
Expansion
Expansion Slot
1 x Internal Mini-PCIe slot full size
Display
Display Type
12.1” TFT LCD
15” TFT LCD
15.6” TFT LCD
17” TFT LCD
18.5” TFT LCD
21.5” TFT LCD
Resolution
800 x 600
1024 x 768
1366 x 768
1280 x 1024
1366 x 768
1920 x 1080
Max. Color
16.2M
16.2M
16.7M
16.7M
16.7M
16.7M
Luminance
450
300
300
350
300
250
Contrast Ratio
800 : 1
800 : 1
500 : 1
1000 : 1
1000 : 1
3000 : 1
Viewing Angle
160(H)/140(V)
170(H)/170(V)
160(H)/160(V)
170(H)/160(V)
170(H)/160(V)
178(H)/178(V)
Backlight
Lifetime
50,000 hrs
50,000 hrs
50,000 hrs
30,000 hrs
50,000 hrs
30,000 hrs
Touch Screen – Resistive Touch Window Type
TS Control
PenMount 6000 on Board
Interface
USB
Light
Transmission
Over 80%
Touch Screen – Projected Capacitive Type
TS Control
Chip on tail
Interface
USB
Light
Transmission
Over 90%
Power
Power Input
9~36V DC
Mechanical
Front Bezel
Flat Bezel Design
Front Bezel
Metal
Aluminum / Panel Mountiong
Rear Panel Metal
Aluminum / VESA Mount 100 x 100
Chassis Color
RAL 9007
IP Rating
Front Panel IP65
Dimensions(mm)
319 x 245 x
51.7
410 x 310 x
54.6
412 x 277.5 x
72
439 x 348 x
64.8
499.6 x 314.6
x 72
557 x 362 x
64.8
Operating System Support
OS Support
Windows 7 64-bit, WES 7, Windows 8, WES 8, Windows 8.1
Environmental
10
Operating
Temperature
0~50℃
Storage
Temperature
-20~60℃
Storage
Humidity
10 to 90% @ 40℃, non-condensing
Certification
CE / FCC Class A
1.3 Dimensions
Figure 1.1: Dimensions of ARCHMI-912(P)
ARCHMI-9XX Series User Manual
11
Figure 1.2: Dimensions of ARCHMI-915(P)
Figure 1.3: Dimensions of ARCHMI-916 Resistive Touch
ARCHMI-9XX Series User Manual
12
Figure 1.4: Dimensions of ARCHMI-916 Projective Capacitive Touch
Figure 1.5: Dimensions of ARCHMI-917(P)
ARCHMI-9XX Series User Manual
13
Figure 1.6: Dimensions of ARCHMI-918(P)
Figure 1.7: Dimensions of ARCHMI-921(P)
ARCHMI-9XX Series User Manual
14
1.4 Brief Description of ARCHMI-9XX
There are 12.1”, 15”, 15.6”, 17”, 18.5” and 21.5” Industrial Compact Size Panel
PC in ARCHMI-9XX series, which comes with flat front panel touch screen and fanless
design. It is powered by Intel 4th Gen. Core i3 CPU Processors, 4GB DDR3L 1600 MHz
(8GB is for option). ARCHMI series is 9~36V DC wide-ranging power input and IP65
compliant front panel. Optional projected capacitive touch support 7H anti-scratch
surface is ideal for use as PC-based controller for Industrial Automation & Factory
Automation.
Figure 1.8: Front View of ARCHMI-9XX Series
ARCHMI-9XX Series User Manual
15
Figure 1.9: Rear View of ARCHMI-912(P)
Figure 1.10: Rear View of ARCHMI-915(P)
ARCHMI-9XX Series User Manual
16
Figure 1.11: Rear View of ARCHMI-916(P)
Figure 1.12: Rear View of ARCHMI-917(P)
ARCHMI-9XX Series User Manual
17
Figure 1.13: Rear View of ARCHMI -918(P)
Figure 1.14: Rear View of ARCHMI-921(P)
ARCHMI-9XX Series User Manual
18
1.5 Installation of HDD
Step 1
There are 2 screws to deal with when
enclosing or removing the chassis.
Gently remove 2 screws.
Step 2
You can put or remove HDD into the
machine by pulling the HDD bracket.
Step 3
You can remove HDD by unscrewing 4
screws in the HDD bracket.
Note: 4 screws are packed in the packing
package.
ARCHMI-9XX Series User Manual
19
Step 4
There is a SD hole in the side of machine.
You can replace SD card from there.
ARCHMI-9XX Series User Manual
20
1.6 VESA Mounting
The ARCHMI series is designed to be VESA mounted as shown in Picture. Just
carefully place the unit through the hole and tighten the given screws from the rear
to secure the mounting.
Figure 1.15: ARCHMI Series VESA Mounting
1.7 Panel Mounting
There are four holes located along the four sides of the HMI. Insert the clamp from
the four sides and tighten them with the nuts provided.
Figure 1.16: ARCHMI Series Panel Mounting
ARCHMI-9XX Series User Manual
21
Chapter 2 Hardware
Specifications
Board Size
170mm x 113mm
CPU Support
Intel® Core™ i3-4010U /1.7GHz (onboard)
Intel® Core™ /i5-4310U /2.0 up to 3.00GHz (option）
Intel® Core™ /i7-4510U /2.0 up to 3.10GHz (option）
Chipset
SoC
Memory Support
Onboard 4GB DDR3L SDRAM
Graphics
Intel® HD Graphics 4400
Display Mode
1 x HDMI Port
1 x LVDS (18/24-bit dual LVDS)
1 x eDP Port (EDP1, option)
Support
Resolution
Up to 1920 x 1200 for HDMI
Up to 1920 x 1200 for LVDS (PS8625)
Up to 1920 x 1200 for eDP
Dual Display
HDMI + LVDS
Super I/O
ITE IT8518E
Fintek F81216AD
BIOS
AMI/UEFI
Storage
1 x SATAIII Connector (7P)
1 x SATAIII Connector (7P+15P)
2.1 Motherboard Introduction
SBC-7110 is a 4" industrial motherboard developed on the basis of Intel Haswell-U
Processors, which provides abundant peripheral interfaces to meet the needs of
different customers. Also, it features dual GbE ports, 5-COM ports and one Mini PCIE
configuration, one eDP port, one HDMI port, one LVDS interface. To satisfy the
special needs of high-end customers, CN1 and CN2 and CN3 richer extension
functions. The product is widely used in various sectors of industrial control.
2.2 Specifications
ARCHMI-9XX Series User Manual
22
1 x SD Slot
Ethernet
2 x PCIe Gbe LAN by Intel 82574L
USB
2 x USB 3.0 (type A)stack ports (USB3)
(USB 3.0: USB3-1/USB3-2, USB 2.0: USB1/USB2)
2 x USB 2.0 Pin header for CN3 (USB3/USB4)
1 x USB 2.0 Pin header for CN2 (USB5)
1 x USB 2.0 Pin header for CN1 (USB7 or Touch, option)
1 x USB 2.0 for MPCIE1 (USB8)
Serial
1 x RS232/RS422/RS485 port, DB9 connector for external (COM1)
Pin 9 w/5V/12V/Ring select
1 x RS232 port, DB9 connector for external (COM2)
Pin 9 w/5V/12V/Ring select
2 x UART for CN3 (COM3,COM4)
1 x RS422/485 header for CN2 (IT8518E/COM5)
1 x RS422/485 header for CN2 (IT8518E/COM6,option)
Digital I/O
8-bit digital I/O by Pin header (CN2)
4-bit digital Input
4-bit digital Output
4-bit digital I/O by Pin header (CN3)
2-bit digital Input
2-bit digital Output
Battery
Support CR2477 Li battery by 2-pin header (BAT1/CMOS)
Smart Battery
1 x Smart battery
Support 3 Serial Li battery by 10-pin header (BAT2)
Audio
Support Audio via Realtek ALC662-VD HD audio codec
Support Line-in, Line-out, MIC by 2x6-pin header
Keyboard /Mouse
1 x PS2 keyboard/mouse by box pin header (CN3)
Expansion Bus
1 x mini-PCI-express slot
1 x PCI-express (CN3)
Touch Ctrl
1 x Touch ctrl header for TCH1 (ITE8518E/COM6)
(JP4 setting：RS232 or USB 2.0)
Power
Management
Wide Range DC9V~36V input
1 x 3-pin power input connector
Switches and
1 x Power on/off switch (BT1/BT2/CN2/CN3)
ARCHMI-9XX Series User Manual
23
LED Indicators
1 x Reset (CN2)
1 x HDD LED status (CN2)
1 x Power LED status (CN1)
1 x Buzzer
External I/O port
2 x COM Ports (COM1/COM2)
2 x USB 3.0 Ports (stack)
2 x RJ45 GbE LAN Ports
1 x HDMI Port
1 x Stack audio Jack (Line out)
Watchdog Timer
Software programmable 1–255 level by Super I/O (Reserve)
Temperature
Operating: -20℃ to 70℃
Storage: -40℃ to 85℃
Humidity
10% - 90%, non-condensing, operating
Power
Consumption
12V /1.33A (Intel I3-4010U processor with 4GB DDR3L DRAM)
12V /1.33A (Intel I5-4310U processor with 4GB DDR3L DRAM)
12V /1.33A (Intel I7-4510U processor with 4GB DDR3L DRAM)
EMI/EMS
Meet CE/FCC class A
TB-528CAN2
2 x CAN bus
1 x SIM Card Socket
1 x mini-PCI-express slot
ARCHMI-9XX Series User Manual
24
(units :mm)
Figure 2.1: Motherboard Dimensions
ARCHMI-9XX Series User Manual
25
2.3 Jumpers and Connectors Location
Figure 2.2: Jumpers and Connectors Location- Board Top
Figure 2.3: Jumpers and Connectors Location- Board Bottom
ARCHMI-9XX Series User Manual
26
2.4 Jumpers Setting and Connectors
Model
Processor
Number
PBF
Cores/Threads
TDP
Remarks
SBC-7110-i34010-4G
I3-4010U
1.7GHz
2 / 4
15W
SBC-7110-i34010P-4G
i3-4010U
1.7GHz
2 / 4
15W
Option
SBC-7110-i54310-4G
i5-4310U
2.0 up to 3.0GHz
2 / 4
15W
Option
SBC-7110-i54310P-4G
i5-4310U
2.0 up to 3.0GHz
2 / 4
15W
Option
SBC-7110-i74510-4G
i7-4510U
2.0 up to 3.1GHz
2 / 4
15W
Option
SBC-7110-i74510P-4G
I7-4510U
2.0 up to 3.1GHz
2 / 4
15W
option
Pin#
Signal Name
1
Ground
2
VCC
3
Rotation detection
1. CPU1:
(FCBGA1168) onboard Intel Haswell-U Processors.
2. H3/H4/H5/H6 (option):
CPU1 Heat Sink Screw holes, four screw holes for intel Haswell-U Processors
Heat Sink assemble.
3. FAN1 (option):
(2.54mm Pitch 1x3 Pin Header), Fan connector, cooling fans can be connected
directly for use. You may set the rotation condition of cooling fan in menu of
BIOS CMOS Setup.
Note:
Output power of cooling fan must be limited under 5W.
4. U2/U3/U4/U5/U7/U8/U9/U10:
ARCHMI-9XX Series User Manual
(FBGA96) onboard DDR3L Memory.
27
Model
Memory
SBC-7110-i34010-4G
4GB
SBC-7110-i34010P-4G
4GB (option)
SBC-7110-i54310-4G
4GB (option)
SBC-7110-i54310P-4G
4GB (option)
SBC-7110-i74510-4G
4GB (option)
SBC-7110-i74510P-4G
4GB (option)
S-422(Switch)
Mode
Pin6 (Off)
ATX Power
Pin6 (On)
Auto Power on (Default)
Pin#
Mode
Open
ATX Power
Close 1-2
Auto Power on (Default)
Pin#
Signal Name
Pin1
VBAT
Pin2
Ground
JP3
CMOS
Open
NORMAL (Default)
Close 1-2
Clear CMOS
5. S-422 (PIN6):
(Switch), ATX Power and Auto Power on jumper setting.
6. PS_ON (option):
(2.0mm Pitch 1x2 Pin wafe Header), ATX Power and Auto Power on jumper
setting.
7. BAT1:
(1.25mm Pitch 1x2 Wafer Pin Header) 3.0V Li battery is embedded to provide
power for CMOS.
8. JP3:
(2.0mm Pitch 1x2 Pin Header) CMOS clear jumper, CMOS clear operation will
permanently reset old BIOS settings to factory defaults.
ARCHMI-9XX Series User Manual
28
Procedures of CMOS clear:
Pin#
Signal Name
Pin1
VCC_BAT1
Pin2
VCC_BAT1
Pin3
VCC_BAT1
Pin4
SMB_DAT_SW
Pin5
SMB_SCL_SW
Pin6
BAT1_TEMP
Pin7
Ground
Pin8
Ground
Pin9
Ground
Pin10
SET_BAT1_ON
Function
Specifications
Nominal voltage (3S1P)
11.1~12.6V
Charge voltage
12.6V
Charge current
0.5C
Pin#
Signal Name
Pin1
BAT2_LED+
a) Turn off the system and unplug the power cord from the power outlet.
b) To clear the CMOS settings, use the jumper cap to close pins 1 and 2 for
about 3 seconds then reinstall the jumper clip back to pins open.
c) Power on the system again.
d) When entering the POST screen, press the <ESC> or <DEL> key to enter
CMOS Setup Utility to load optimal defaults.
e) After the above operations, save changes and exit BIOS Setup.
9. BAT2:
(2.0mm Pitch 1x10 Wafer Pin Header), Smart battery Interface.
10. BAT_LED:
(2.0mm Pitch 1x4 Wafer Pin Header), The Charge status indicator for BAT2.
Pin1-Pin3: Charge LED status.
Pin2-Pin3: Discharge LED status.
Pin4-Pin3: EC LED status.
ARCHMI-9XX Series User Manual
29
Pin2
BAT2_LED-
Pin3
Ground
Pin4
RST_EC
Pin#
Signal Name
Pin1
DC+9V~36V
Pin2
Ground
Pin3
FG
Model
DC_IN1
SBC-7110-i34010U-4G
180°Connector
SBC-7110-I54310U-4G
180°Connector
SBC-7110-I74510U-4G
180°Connector
SBC-7110-I34010UP-4G
45°Connector
SBC-7110-I54310UP-4G
45°Connector
SBC-7110-I74510UP-4G
45°Connector
11. DC_IN1:
(5.08mm Pitch 1x3 Pin Connector), DC9V~36V System power input connector.
12. BT1/BT2:
Power on/off button, They are used to connect power switch button. The two
pins are disconnected under normal condition. You may short them
temporarily to realize system startup & shutdown or awaken the system from
sleep state.
13. LED2/LED3/LED4/LED5:
LED2: LED STATUS. Green LED for Motherboard EC status.
LED3: LED STATUS. Green LED for Power status.
LED4: LED STATUS. Green LED for Motherboard Standby Power Good status.
LED5: LED STATUS. Green LED for CPU1 status
14. HDMI1:
(HDMI 19P Connector), High Definition Multimedia Interface connector.
ARCHMI-9XX Series User Manual
Loading...