Aplex ARCHMI-716 User Manual

0

ARCHMI-7XX

15.6”, 17”, 18.5”, and 21.5”, Intel Atom Low Power D2550, Fanless

Industrial Compact Size Panel PC (SBC-7106A)

User Manual

Release Date Revision

Jun. 2015 V1.2

®2015 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan

Aplex Technology, Inc.

15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan

Tel: [phone] Fax: [phone] E-mail: [e-mail] URL: www.aplextec.com

ARCHMI-7XX (SBC-7106A) User Manual

1

Revision History

Reversion

Date

Description

1.0

2014/0 9/1 0

Official Version

1.1

2014/12/24

Add 15.6” and 18.5” Product Information

1.2

2015/06/16

Add VESA Mount and Panel Mount Description

ARCHMI-7XX (SBC-7106A) User Manual

2

Warning!________________________

Risque de choc électrique - Ne pas faire fonctionner la machine avec son capot arrière
enlevé. Des tensions dangereuses sont élevées à l'intérieur.

Electric Shock Hazard – Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.

Cet équipement génère, utilise et peut émettre une énergie de radiofréquence et
s'il n'est pas installé et utilisé conformément au manuel d'instructions, il peut provoquer
des interférences dans les communications radio. Il a été testé et approuvé conforme
aux limites pour un dispositif de classe A et selon les règles de la FCC, qui sont
conçues pour fournir une protection raisonnable contre de telles interférences dans un
environnement commercial. Le fonctionnement de cet équipement dans une zone
résidentielle est susceptible de provoquer des interférences, dans ce cas l'utilisateur, à
ses propres frais, devra faire le nécessaire pour prendre toutes les mesures requises
pour corriger le problème.

This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply with the
limits for a Class A computing device pursuant to FCC Rules, which are designed to
provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to take
whatever measures may be required to correct the interference.

Avertissement!___________________

ARCHMI-7XX (SBC-7106A) User Manual

3

Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.

Precaution
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect.
Les piles usagée doivent être recyclées dans la mesure du possible. La mise au
rebut des piles usagées doit resecter les réglementations locales en vigueur en
matière de protection de l'environnement.

Disclaimer
This information in this document is subject to change without notice. In no event
shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this
document or in any related materials.

ARCHMI-7XX (SBC-7106A) User Manual

4

Packing List

Accessories (as ticked) included in this package are:

□ Adaptor

□ Driver & manual CD disc

□ Other.___________________(please specify)

ARCHMI-7XX (SBC-7106A) User Manual

5

Safety Precautions

Follow the messages below to prevent your systems from damage:

◆ Avoid your system from static electricity on all occasions.

◆ Prevent electric shock. Don‘t touch any components of this card when

the card is power-on. Always disconnect power when the system is not
in use.

◆ Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.

Consignes de sécurité

Suivez les messages ci-dessous pour éviter que vos systèmes contre
les dommages:

◆ Éviter votre système contre l'électricité statique sur toutes les
occasions.

◆ Évitez les chocs électriques. Ne pas toucher les composants de cette
carte lorsque la carte est sous tension. Toujours débrancher lorsque le
système n'est pas en cours d'utilisation.

◆ Couper l'alimentation électrique lorsque vous changez tous les
périphériques matériels. Par exemple, lorsque vous connectez un
cavalier ou d'installer des cartes, une forte augmentation de la
puissance peut endommager les composants électroniques ou
l'ensemble du système.

ARCHMI-7XX (SBC-7106A) User Manual

6

Table of Contents

Revision History…………………………………………………………………………………………………….1

Warning!/Avertissement!..............................................…………………………….……..….2

Caution/Precaution/Disclaimer……..……………………………..………………………………………3

Packing List………………………………..……….………………………………………………………………..4

Safety Precautions/Consignes de sécurité………………………………….………………………….5

Chapter 1 Getting Started

1.1 Features……………………………………………...…………………………..8

1.2 Specifications……………………….………………………………………….8

1.3 Dimensions……………………………..…………………………………….…11

1.4 Brief Description of ARCHMI-7XX……….…………………….…...15

1.5 Installation of HDD ………………………………………...…………..…19

1.6 VESA Mounting………………………………………………………………..21

1.7 Panel Mounting……………………………………………………………….21

Chapter 2 Hardware

2.1 Motherboard Introduction…………........……….……..…………....22

2.2 Specifications……………………………………………………………………22

2.3 Jumpers and Connectors Location………………………………….…26

2.4 Jumpers Setting and Connectors………………………………………27

Chapter 3 BIOS Setup

3.1 Operations after POST Screen……………..……………………………56

3.2 BIOS Setup Utility………………………………………………….………….56

3.3 Main Settings……………………………………………………………………58

3.4 Advanced Settings…………………………………….……………………...59

3.5 Chipset Settings………………………………………….…………………...65

3.6 Boot Settings…………………………………………………………………...68

3.7 Security Settings……………………………………………..……………….71

3.8 Save & Exit Settings………………………………………..………………..72

ARCHMI-7XX (SBC-7106A) User Manual

7

Chapter 4 Installation of Drivers

4.1 Intel Chipset Driver……...……………………………………..…………...75

4.2 Intel Graphics Media Accelerator Driver……………..………......78

4.3 Intel (R) Network Adapter…………………………………..…………….81

4.4 Realtek ALC662 HD Audio Driver Installation…………….………84

Chapter 5 Touch Screen Installation

5.1 Windows XP/2003/Vista/7 Universal Driver Installation for

PenMount 6000 Series...…………………….....……………………...86

5.2 Software Functions…………………………………………………………..96

Figures

Figure 1.1: Dimensions of ARCHMI-716(P)...…………………………..11
Figure 1.2: Dimensions of ARCHMI-717(P).………………………….…12
Figure 1.3: Dimensions of ARCHMI-718(P)….………………………….13
Figure 1.4: Dimensions of ARCHMI-721(P).……………………...…….14
Figure 1.5: Front View of ARCHMI-716(P).………………………..…...15
Figure 1.6: Rear View of ARCHMI-716(P).………………………...……15
Figure 1.7: Front View of ARCHMI-717(P).……………………………..16
Figure 1.8: Rear View of ARCHMI-717(P)….……………………….……16
Figure 1.9: Front View of ARCHMI-718(P)….……………………..……17

Figure 1.10: Rear View of ARCHMI-718(P)….………………………....17

Figure 1.11: Front View of ARCHMI-721(P)….…………………..…….18
Figure 1.12: Rear View of ARCHMI-721(P)….………………….………18
Figure 1.13: ARCHMI Series VESA Mounting…………………………..21
Figure 1.14: ARCHMI Series Panel Mounting………………………….21
Figure 2.1: Motherboard Dimensions…………………………….………25
Figure 2.2: Jumpers and Connectors Location-Board Top……….26
Figure 2.3: Jumpers and Connectors Location-Board Bottom...26

ARCHMI-7XX (SBC-7106A) User Manual

8

Chapter 1 Getting Started

ARCHMI-716(P)

ARCHMI-717(P)

ARCHMI-718(P)

ARCHMI-721(P)

System

CPU

Onboard Intel Atom Cedar View D2550 1.86GHz Dual Core Processors

Chipset

Intel NM10 Express Chipset

Memory

Onboard 4GB DDR III 800 MHz

IO Port

USB

2 x USB 2.0 type A

Serial/Parallel

1 x RS-232 DB-9

1 x DB-9 RS-232/422/485 (Default RS-232)

Audio

1 x Audio Line Out

LAN

2 x GbE LAN RJ-45

Power

1 x 3-pin DC Power input terminal

1 x 2-pin power switch

Power LED Light

1 x Power LED light

Option

2 x RS-232 DB-9 + 1 x Mini-PCIe slot via TB-528C2ME1

2 x CAN bus via TB-528CAN2

2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1xRS-232 DB-9 via TB-528C1U2P1

2 x USB 2.0 type A + via TB-528U2

Storage Space

Storage

1 x 2.5" SATA HDD bay for SATA HDD (Easy Accessible)

1 x SD card slot, up to 32GB

1.1 Features

 15.6”/17”/18.5”/21.5” Industrial Compact Size Panel PC
 Flat front panel touch screen
 Fanless design
 Intel Atom D2550 1.86GHz CPU built-in
 Onboard 4GB DDR III 800 MHz
 9~36VDC wide-ranging power input
 IP65 compliant front panel
 Optional projected capacitive touchscreen support 7H anti-scratch surface

1.2 Specifications

ARCHMI-7XX (SBC-7106A) User Manual

9

Display

Display Type

15.6”

17”

18.5”

21.5”

Max. Resolution

1366 x 768

1280 x 1024

1366 x 768

1920 x 1080

Max. Color

16.7M

16.7M

16.7M

16.7M

Luminance (cd/m²)

300

350

300

250

Contrast Ratio

500 : 1

1000 : 1

1000 : 1

3000 : 1

Viewing angle

160 (H) / 160 (V)

170 (H) / 160 (V)

170 (H) / 160 (V)

178 (H) / 178 (V)

Backlight Lifetime

50,000 hrs

30,000 hrs

50,000 hrs

30,000 hrs

Touch Screen – Resistive Touch Window Type

TS Control IC

PenMount 6000 on Board

Interface

USB

Light Transmission

Over 80%

Touch Screen – Projected Capacitive Type

TS Control IC

Chip on tail

Interface

USB

Light Transmission

Over 90%

Power

Power Input

9~36V/DC

Mechanical

Construction

RAL 9007

IP Rating

IP65 compliant front panel

Mounting

Panel Mounting VESA 100 x 100 mm

Dimension (mm)

412 x 278 x 60.4

439 x 348 x 64.8

500 x 315 x 60

557 x 362 x 64.8

Environmental

Operating

temperature

0~50℃

Storage temperature

-20~60℃

Storage humidity

10 to 90% @ 40°C, non- condensing

Certification

CE / FCC Class A

Operating System Support

OS Support

Windows 32-bit XP Pro, Windows 7 32-bit, Windows CE 6.0, Fedora 14

Note 1: ARCHMI series is covered by one or more of the following patents: US6, 570,
884, US6,115,776, and US6,327,625.
** Please be notice.
Due to the limitation for Intel N2000/D2000 EMGD driver, therefore ARCHMI will
have some limitation under XP.

ARCHMI-7XX (SBC-7106A) User Manual

10

1. The Intel EMGD driver version is v1.15

2. It will have the unknown device under device management due

to not support the Intel HDA device (refer to the photo below)

3. It will need install the correct driver by LCD panel size/resolution,

totally four version : 800*480, 800*600, 1024*768(18bit),
1024*768(24bit)

4. The original driver not support VGA display will have to

customize

ARCHMI-7XX (SBC-7106A) User Manual

11

1.3 Dimensions

Figure 1.1: Dimensions of ARCHMI-716(P)

ARCHMI-7XX (SBC-7106A) User Manual

12

Figure 1.2: Dimensions of ARCHMI-717(P)

ARCHMI-7XX (SBC-7106A) User Manual

13

Figure 1.3: Dimensions of ARCHMI-718(P)

ARCHMI-7XX (SBC-7106A) User Manual

14

Figure 1.4: Dimensions of ARCHMI-721(P)

ARCHMI-7XX (SBC-7106A) User Manual

15

1.4 Brief Description of ARCHMI-7XX

There are 15.6”, 17”, 18.5” and 21.5” Industrial Compact Size Panel PC in

ARCHMI series, which comes with flat front panel touch screen and fanless design. It

is powered by Intel Atom D2550 1.8GHz CPU built-in, 4GB DDR III 800 MHz. ARCHMI

series is 9~36VDC wide-ranging power input and IP65 compliant front panel. Optional

projected capacitive touch screen support 7H anti-scratch surface is ideal for use as a

PC-based controller for Industrial Automation & Factory Automation.

Figure 1.5: Front View of ARCHMI-716(P)

Figure 1.6: Rear View of ARCHMI-716(P)

ARCHMI-7XX (SBC-7106A) User Manual

16

Figure 1.7: Front View of ARCHMI-717(P)

Figure 1.8: Rear View of ARCHMI-717(P)

ARCHMI-7XX (SBC-7106A) User Manual

17

Figure 1.9: Front View of ARCHMI-718(P)

Figure 1.10: Rear View of ARCHMI-718(P)

ARCHMI-7XX (SBC-7106A) User Manual

18

Figure 1.11: Front View of ARCHMI-721(P)

Figure 1.12: Rear View of ARCHMI-721(P)

ARCHMI-7XX (SBC-7106A) User Manual

19

1.5 Installation of HDD

Step 1

There are 2 screws to deal with when
enclosing or removing the chassis. Gently
remove 2 screws.

Step 2

You can put or remove HDD into the machine
by pulling the HDD bracket.

Step 3

You can remove HDD by unscrewing 4 screws
in the HDD bracket.
Note: 4 screws are packed in the packing
package.

ARCHMI-7XX (SBC-7106A) User Manual

20

Step 4

There is a SD hole in the side of machine. You
can replace SD card from there.

ARCHMI-7XX (SBC-7106A) User Manual

21

1.6 VESA Mounting

The ARCHMI series is designed to be VESA mounted as shown in Picture. Just
carefully place the unit through the hole and tighten the given screws from the rear
to secure the mounting.

Figure 1.13: ARCHMI Series VESA Mounting

1.7 Panel Mounting

There are four holes located along the four sides of the HMI. Insert the clamp from
the four sides and tighten them with the nuts provided.

Figure 1.14: ARCHMI Series Panel Mounting

ARCHMI-7XX (SBC-7106A) User Manual

22

Chapter 2 Hardware

Specifications

Board Size

170mm x 113mm

CPU Support

Intel Atom D2550 /1.86GHz (2cores,10W, onboard)

Intel Atom N2600 /1.60GHz (2cores,3.5W, option）

Chipset

Intel NM10 Express

Memory Support

Onboard 4GB DDRIII SDRAM (D2550)

Onboard 2GB DDRIII SDRAM (N2600,option)

Graphics

Integrated Intel GMA 3650 (D2550)
Integrated Intel GMA 3600 (N2600)

Display Mode

1 x CRT Port

1 x HDMI Port
1 x LVDS (18/24-bit dual LVDS)

Support

Resolution

Up to 1920 x 1200 for CRT
Up to 1920 x 1200 for HDMI

Up to 1920 x 1200 for LVDS (PS8625)

Dual Display

CRT+LVDS
CRT+HDMI
LVDS+HDMI

Super I/O

Winbond W83627UHG-E

2.1 Motherboard Introduction

SBC-7106A is a 4" industrial motherboard developed on the basis of Intel

Cedarview-M/D Processors and NM10, which provides abundant peripheral

interfaces to meet the needs of different customers. Also, it features dual GbE ports,

3-COM ports and one Mini PCIE configuration, one VGA port, one HDMI port, one

LVDS interface. To satisfy the special needs of high-end customers, CN1 and CN2 and

CN3 richer extension functions. The product is widely used in various sectors of

industrial control.

2.2 Specifications

ARCHMI-7XX (SBC-7106A) User Manual

23

BIOS

AMIBIOS

Storage

1 x SATA Connector (7P)
1 x SATA Connector (7P+15P)
1 x SD Socket (USB to SD)

Ethernet

2 x PCIe Gbe LAN by Intel 82574L

USB

2 x USB 2.0 (type A)stack ports (USB4/USB5)

2 x USB 2.0 Pin header for CN3 (USB2/USB3)
1 x USB 2.0 Pin header for CN1 (USB0,option)
1 x USB 2.0 Pin header for CN2 (USB1)
1 x USB 2.0 for MPCIE1 (USB7)

Serial

1 x RS232/RS422/RS485 port, DB9 connector for external
COM1)

pin 9 w/5V/12V/Ring select

1 x RS232 port, DB9 connector for external (COM2)

pin 9 w/5V/12V/Ring select

1 x RS422/485 header for CN2 (COM3)
2 x UART for CN3 (COM5,COM6)

Digital I/O

8-bit digital I/O by Pin header (CN2)

4-bit digital Input
4-bit digital Output

4-bit digital I/O by Pin header (CN3)

2-bit digital Input
2-bit digital Output

Battery

Support CR2477 Li battery by 2-pin header

Audio

Support Audio via Realtek ALC662 HD audio codec

Support Line-in, Line-out, MIC by 2x6-pin header

Keyboard /Mouse

1 x PS2 keyboard/mouse by 1x6 box pin header (CN3)

Expansion Bus

1 x mini-PCI-express slot
1 x PCI-express (CN3)

Touch Ctrl

1 x Touch ctrl header for TCH1 (COM4)

Power
Management

Wide Range DC9V~36V input

1 x 3-pin power input connector

Switches and
LED Indicators

1 x Power on/off switch (BT1/BT2/CN2/CN3)

1 x Reset (CN2)

ARCHMI-7XX (SBC-7106A) User Manual

24

1 x Power LED status (CN1)

1 x HDD LED status (CN2)
1 x Buzzer

External I/O port

2 x COM Ports (COM1/COM2)

2 x USB 2.0 Ports (stack)
2 x RJ45 GbE LAN Ports
1 x HDMI Port
1 x Stack audio Jack (Line out)

Watchdog Timer

Software programmable 1 – 255 second by Super I/O

Temperature

Operating: -20℃ to 70℃

Storage: -40℃ to 85℃

Humidity

5% - 95%, non-condensing, operating

Power

Consumption

12V /0.95A (Intel Atom N2600 processor with 2GB DDR3
DRAM)

EMI/EMS

Meet CE/FCC class A

TB-528CAN2

2 x CAN bus

1 x SIM Card Socket

1 x mini-PCI-express slot

ARCHMI-7XX (SBC-7106A) User Manual

25

(units :mm)

Figure 2.1: Motherboard Dimensions

ARCHMI-7XX (SBC-7106A) User Manual

26

2.3 Jumpers and Connectors Location

Figure 2.2: Jumpers and Connectors Location- Board Top

Figure 2.3: Jumpers and Connectors Location- Board Bottom

ARCHMI-7XX (SBC-7106A) User Manual

27

2.4 Jumpers Setting and Connectors

Model

CPU

SBC-7106A-D25-4G

D2550

SBC-7106A-D25P-4G

D2550（option）

SBC-7106A-N26-2G

N2600（option）

Model

Memory

SBC-7106A-D25-4G

4GB

SBC-7106A-D25P-4G

4GB（option）

SBC-7106A-N26-2G

2GB（option）

JP5

Mode

Open

ATX Power

Close

Auto Power on (option)

S-422

Mode

Pin11-12（Off）

ATX Power

Pin11-12（On）

Auto Power on (Default)

1. CPU1:

(FCBGA559), onboard Intel Intel Cedarview-M/D Processors

2. H3/H4/H5/H6:

CPU1 and U53 Heat Sink Screw holes, four screw holes for intel D2550 (or N2600)
and NM10 Heat Sink assemble.

3. U5/U6/U7/U8/U9/U10/U11/U12:

Onboard DDRIII Memory

4. JP5:

(2.0mm Pitch 1x2 box Pin Header), ATX Power and Auto Power on jumper
setting.

5. JP3:

(2.0mm Pitch 1x2 Pin Header) CMOS clear jumper, CMOS clear operation will
permanently reset old BIOS settings to factory defaults.

ARCHMI-7XX (SBC-7106A) User Manual

28

JP3

CMOS

Open

Normal (Default)

Close 1-2

Clear CMOS

Model

JP3

SBC-7106A-N26

No

SBC-7106A-D25

Yes

SBC-7106A-D25P

Yes

Pin#

Signal Name

Pin1

VBAT

PIN2

Ground

Pin#

Power Input

Pin1

DC+9V~32V

Pin2

Ground

Pin3

FG

Model

DC_IN1

SBC-7106A-D25

180°Connector

SBC-7106A-D25P

45°Connector

SBC-7106A-N26

180°Connector

Procedures of CMOS clear:

a) Turn off the system and unplug the power cord from the power outlet.
b) To clear the CMOS settings, use the jumper cap to close pins 1 and 2 for about 3

seconds then reinstall the jumper clip back to pins open.
c) Power on the system again.
d) When entering the POST screen, press the <F1> or <DEL> key to enter CMOS

Setup Utility to load optimal defaults.
e) After the above operations, save changes and exit BIOS Setup.

6. BAT1:

(1.25mm Pitch 1x2 box Pin Header) 3.0V Li battery is embedded to provide
power for CMOS.

7. DC_IN1:

(5.08mm Pitch 1x3 Pin Connector),DC9V~32V System power input connector.

ARCHMI-7XX (SBC-7106A) User Manual

29

8. BT1/BT2:

Pin#

Signal Name

1

Ground

2

VCC

3

Rotation detection

Model

CPU_FAN1

SBC-7106A-D25

Yes

SBC-7106A-D25P

Yes

SBC-7106A-N26

No

Signal Name

Pin#

Pin#

Signal Name

CRT_RED

1

2

Ground

CRT_GREEN

3

4

Ground

CRT_BLUE

5

6

VGA_EN

CRT_H_SYNC

7

8

CRT_DDCDATA

CRT_V_SYNC

9

10

CRT_DDCCLK

Ground

11

12

Ground

Power on/off button, They are used to connect power switch button. The two
pins are disconnected under normal condition. You may short them temporarily
to realize system startup & shutdown or awaken the system from sleep state.

9. CPU_FAN1:

(2.54mm Pitch 1x3 Pin Header),Fan connector, cooling fans can be connected
directly for use. You may set the rotation condition of cooling fan in menu of
BIOS CMOS Setup.

Note:

Output power of cooling fan must be limited under 5W.

10. VGA1:

(CRT 2.0mm Pitch 2X6 Pin Header), Video Graphic Array Port, Provide 2x6Pin
cable to VGA Port.

ARCHMI-7XX (SBC-7106A) User Manual