0
ARCDIS-1XX
(TB-6028)
8”, 15.6”, 17”, 18.5”, 21.5” front panel IP65 aluminum die-casting chassis Display
User Manual
Release Date Revision
Jul. 2015 V1.2
®2015 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw URL: www.aplextec.com
ARCDIS-1XX (TB-6028) User Manual
1
Revision History
Reversion
Date
Description
1.0
2014/10/03
Official Version
1.1
2015/06/10
Add 15.6”, 17”, and 18.5”
1.2
2015/07/24
Delete description of die-casting,
Modify Power Consumption
ARCDIS-1XX (TB-6028) User Manual
2
Warning!___________________________
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions manual, it may
cause interference to radio communications. It has been tested and found to
comply with the limits for a Class A computing device pursuant to FCC Rules,
which are designed to provide reasonable protection against such interference
when operated in a commercial environment. Operation of this equipment in
a residential area is likely to cause interference in which case the user at his
own expense will be required to take whatever measures may be required to
correct the interference.
Electric Shock Hazard – Do not operate the machine with its back cover
removed. There are dangerous high voltages inside.
Disclaimer
This information in this document is subject to change without notice. In no event
shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this
document or in any related materials.
ARCDIS-1XX (TB-6028) User Manual
3
Table of Contents
Revision History………………………………………………………………………………….1
Warning!………………………………………………………………………………….……..….2
Disclaimer……………………….……………………………………………….…………………2
Chapter 1 Getting Started
1.1 Features…………………………………………………..…………………………….5
1.2 Specifications…………………………………………………………………………5
1.3 Dimensions……………………...……………...…..…………………………….…7
1.4 System Diagram(Full Function)................................................12
1.5 Brief Description of ARCDIS-1XX …………….………..………………….13
1.6 Display Mode…………………………………………..…………………………..19
Chapter 2 OSD
2.1 AD Board OSD Functions………….…...………..….…..……………….….20
2.2 OSD Controls……………………………..…………….…………………….……21
2.3 OSD Functions…………………………………………..………………………...22
2.4 OSD Default Parameter……………..…………….………………………....22
2.5 Main Menu………………………………..…………….……………………......23
Chapter 3 Installation
3.1 Windows 2000/XP/2003/Vista Universal Driver Installation for
PenMount 6000 Series…..……………………..………………………...…27
3.2 Installing Software (Resistive Touch Screen Type)…………..…..27
3.3 Software Functions (Resistive Touch Screen Type)………………30
3.4 Installing Software (Projected Capacitive Touch)…….............38
3.5 Software Functions (Projected Capacitive Touch)………….……43
Appendix A: Board Descriptions & Specifications 51
Descriptions…………………………………….………………………………………...51
Specifications…………………………..…………….………………………………....51
Board Dimensions………………….…………………….……………………………52
ARCDIS-1XX (TB-6028) User Manual
4
Appendix B: Panel Mounting and VESA Mounting 53
Figures
Figure 1.1: Dimensions of ARCDIS-108(P)………….…………………..…..7
Figure 1.2: Dimensions of ARCDIS-116(P)……………………………………8
Figure 1.3: Dimensions of ARCDIS-117(P)..………………………………...9
Figure 1.4: Dimensions of ARCDIS-118(P)…………………………………10
Figure 1.5: Dimensions of ARCDIS-121(P)…………………………………11
Figure 1.6: System Diagram of ARCDIS-1XX……………………………...12
Figure 1.7: Front View of ARCDIS-108(P)……….………………………….14
Figure 1.8: Rear View of ARCDIS-108(P)……………….…………………..14
Figure 1.9: Front View of ARCDIS-116(P)…………………………………..15
Figure 1.10: Rear View of ARCDIS-116(P)……………………………….…15
Figure 1.11: Front View of ARCDIS-117(P)…………………………………16
Figure 1.12: Rear View of ARCDIS-117(P)………………………….………16
Figure 1.13: Front View of ARCDIS-118(P)…………………………………17
Figure 1.14: Rear View of ARCDIS-118(P)………………………………....17
Figure 1.15: Front View of ARCDIS-121(P)…………………………….….18
Figure 1.16: Rear View of ARCDIS-121(P)………….……………………...18
Figure A: Dimensions of TB-6028……………………………………………..52
Figure B: Panel mounting and VESA mounting………………………….53
ARCDIS-1XX (TB-6028) User Manual
5
Chapter 1 Getting Started
ARCDIS-108(P)
ARCDIS-116(P)
ARCDIS-117(P)
ARCDIS-118(P)
ARCDIS-121(P)
Hardware
Display Type
8” color TFT
LCD
15.6”color TFT
LCD
17”color TFT
LCD
18.5”color TFT
LCD
21.5”color TFT
LCD
External I/O Port
Default I/O:
1 x 3 pins terminal block power input 9~36V DC
1 x DVI
1 x VGA
1 x USB for Touch control
Option I/O:
1 x RCA
1 x RS-232 DB-9 for Resistive Touch control
OSD Control
On board controller, extendable key pad from connector
Transfer Board OSD Membrane Keypad
Speaker
1 x 3W AMP internal pin header for option
LCD
Max. Resolution
800 x 600
1366 x 768
1280 x 1024
1366 x 768
1920 x 1080
Max. Color
16.2M
16.7M
16.7M
16.7M
16.7M
Luminance(cd/m²)
350
300
350
300
250
Contrast Ratio
500 : 1
500 : 1
800 : 1
1000 : 1
3000 : 1
Viewing Angle
(H/V)
140°/125°
160°/160°
160°/140°
170°/160°
178°/178°
Backlight Lifetime
40,000 hrs
50,000 hrs
50,000 hrs
50,000
30,000 hrs
1.1 Features
Solid Aluminum chassis
Variety of LCD panel size selections
Front bezel IP65
VGA and DVI input, RCA is for option
9~36V DC wide range power input
1.2 Specifications
ARCDIS-1XX (TB-6028) User Manual
6
Power Input
9~36V DC on board
Power
Consumption
MAX:
4.7W(108)
MAX:
3.6W(108P)
MAX:
12.3W(116)
MAX:
12.8W(116P)
MAX:
14.3W(117)
MAX:
18.4W(117P)
MAX:
21.5W(118)
MAX:
20.4W(118P)
MAX:
21.7W(121)
MAX:
24.9W(121P)
Touch Screen (ARCDIS-1XX)
Type
Resistive Touch Window
Interface
USB / RS-232
Light Transmission
Over 80%
Touch Screen (ARCDIS-1XXP)
Type
Projected Capacitive
Interface
USB
Light Transmission
Over 90%
Mechanical
Construction
Aluminum chassis
Aluminum Die-casting chassis only for 8”
Dimensions
231 x 176 x 51
mm
412 x 277.5 x
60.4 mm
439 x 348 x 64.8
mm
499.6 x 314.6 x
59.9 mm
557 x 362 x 64.8
mm
Net Weight
1.8 kg
4.5 kg
9.56 kg
5.9 kg
7.3 kg
Mounting
Panel / VESA
75x75
Panel / VESA 100x100
Environment Specifications
Operating
Temperature
0 ~ 50 ℃ (32 ~ 122 ℉)
Storage
Temperature
-20 ~ 60 ℃ (-4 ~ 140 ℉)
Storage Humidity
10 ~ 90% @40℃ Non-condensing
IP Rating
Front Panel IP65
Certificate
CE/FCC Class A
ARCDIS-1XX (TB-6028) User Manual
7
1.3 Dimensions
Figure 1.1: Dimensions of ARCDIS-108(P)
ARCDIS-1XX (TB-6028) User Manual
8
Figure 1.2: Dimensions of ARCDIS-116(P)
ARCDIS-1XX (TB-6028) User Manual
9
Figure 1.3: Dimensions of ARCDIS-117(P)
ARCDIS-1XX (TB-6028) User Manual
10
Figure 1.4: Dimensions of ARCDIS-118(P)
ARCDIS-1XX (TB-6028) User Manual
11
Figure 1.5: Dimensions of ARCDIS-121(P)
ARCDIS-1XX (TB-6028) User Manual
12
1.4 System Diagram (Full Function)
Figure 1.6: System diagram of ARCDIS-1xx
ARCDIS-1XX (TB-6028) User Manual
13
1.5 Brief Description of ARCDIS-1XX
ARCDIS-1XX with TB-6028 AD Board is a total IP65 aluminum front bezel and
chassis LCD Display, which comes with 8 inch (luminance of 350 cd/m²), 15.6 inch
(luminance of 300 cd/m²), 17 inch (luminance of 350 cd/m²), 18.5 inch (luminance of
300 cd/m²) and 21.5 inch (luminance of 250 cd/m²) TFT LCD. ARCDIS-108(P) comes
with a viewing angle of 140 (H) degrees and 125 (V) degrees. ARCDOS-116(P) comes
with a viewing angle of 160 (H) degrees and 160 (V) degrees. ARCDIS-117(P) comes
with a viewing angle of 160 (H) degrees and 140 (V) degrees. ARCDIS-118(P) comes
with a viewing angle of 170(H) degrees and 160 (V) degrees. ARCDIS-121(P) comes
with a viewing angle of 178 (H) degrees and 178 (V) degrees. ARCDIS-1XX has more
outstanding features, thus giving the best in monitoring and control applications.
ARCDIS-108 can be VESA-75 mounted. ARCDIS-116, 117, 118 and ARCDSI-121 can be
VESA-100 mounted.
ARCDIS-1XX (TB-6028) User Manual
14
Figure 1.7: Front View of ARCDIS-108(P)
Figure 1.8: Rear View of ARCDIS-108(P)
ARCDIS-1XX (TB-6028) User Manual
15
Figure 1.9: Front View of ARCDIS-116(P)
Figure 1.10: Rear View of ARCDIS-116(P)
ARCDIS-1XX (TB-6028) User Manual
16
Figure 1.11: Front View of ARCDIS-117(P)
Figure 1.12: Rear View of ARCDIS-117(P)
ARCDIS-1XX (TB-6028) User Manual
17
Figure 1.13: Front View of ARCDIS-118(P)
Figure 1.14: Rear View of ARCDIS-118(P)
ARCDIS-1XX (TB-6028) User Manual
18
Figure 1.15: Front View of ARCDIS-121(P)
Figure 1.16: Rear View of ARCDIS-121(P)
ARCDIS-1XX (TB-6028) User Manual
19
1.6 Display Mode
Item
Resolution
H Freq.(kHz)
V Freq.(Hz)
Remark
1
640x350@70
31.469
70.087
VGA
2
640x400@70
31.469
70.087
VGA
3*
640x480@60
31.469
59.940
VESA
4
640x480@66
35.000
66.667
MAC
5
640x480@72
37.861
72.809
VESA
6*
640x480@75
37.500
75.000
VESA
7
720x400@70
31.469
75.000
TEXT
8
800x600@56
35.156
56.250
VESA
9*
800x600@60
37.879
60.317
VESA
10
800x600@72
48.077
72.188
VESA
11*
800x600@75
46.875
75.000
VESA
12
832x624@75
49.107
75.087
MAC
13
848x480@60
31.020
60.000
VESA
14*
1024x768@60
48.363
60.004
VESA
15*
1024x768@75
60.023
75.029
VESA
17
1152x864@70
63.850
70.000
VESA
18
1152x864@75
67.500
75.000
VESA
19
1152x900@76
71.809
76.149
SUN
20*
1280x768@60
47.730
60.000
VESA
21*
1280x768@75
60.290
74.890
VESA
22
1280x960@60
60.000
60.000
VESA
23*
1280x1024@60
63.980
60.000
VESA
24*
1280x1024@75
79.976
75.025
VESA
25*
1366x768@60
47.710
60.020
VESA
26
1440x900@60
56.040
60.000
VESA
27
1440x1050@60
65.320
59.980
VESA
28
1440x1050@75
82.280
74.870
VESA
29*
1920x1080@60
67.500
60.000
VESA
ARCDIS-1XX (TB-6028) User Manual
20
Chapter 2 OSD
Cable Not Connected
2.1 AD Board OSD Functions
Auto Adjust Up/Left Down/Right Power
Menu/Entry Power Indicator
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press
(don’t let them go) the buttons until the AC power cord is connected and the
“RGB” appears on the top left corner of your screen. Now it can be put into the
burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord.
Then press the button (If not workable, press the button and don’t let
them go) until the AC power cord is connected. Please don’t let your fingers go until
the AC power cord is connected again and the wording of “RGB” appears on the top
left corner of your screen, and wait for 3 second. Under the non-signal entry
situation, if is seen, exit is thus successfully made.
ARCDIS-1XX (TB-6028) User Manual
21
When the Burn-in Mode is Unable to Eradicate…
1.) If the “RGB” is still on the top left corner of the screen, press to enter
“Miscellaneous” and choose “Reset”, and then Yes, and press . When the
screen goes black, disconnect power and repeat the above steps.
2.) If the “RGB” is not found, disconnect the AC power cord first. Then press the
buttons (don’t let them go) until the AC power cord is connected, and
wait for 2 to 3 seconds. When “RGB” appears, repeat the above steps.
2.2 OSD Controls
To make any adjustment, select the following:
1. Press (Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
3. Press (Menu) and then choose the item with the ( / or +/-) key.
4. Press (Menu) and then adjust the quality with the ( / or +/-) key.
ARCDIS-1XX (TB-6028) User Manual
22
2.3 OSD Function
ARCDIS-108(P)
ARCDIS-116(P)
ARCDIS-117(P)
ARCDIS-118(P)
ARCDIS-121(P)
Luminance
Brightness
50
50
50
50
50
Contrast
50
50
50
50
50
Management
H. Position
auto
auto
auto
auto
auto
V. Position
auto
auto
auto
auto
auto
Pixel Clock
auto
auto
auto
auto
auto
Phase
auto
auto
auto
auto
auto
Color
sRGB
sRGB
sRGB
sRGB
sRGB
Red
50
50
50
50
50
Green
50
50
50
50
50
Blue
50
50
50
50
50
OSD
H. Position
50
50
50
50
50
V. Position
50
50
50
50
50
OSD time 7 7 7 7
7
Language
English
1. Power button: Power on/off
2. Down button: Brightness
3. Up button: Volume
4. Menu button: Menu
5. Auto button: Auto adjustment
2.4 OSD Default Parameter
ARCDIS-1XX (TB-6028) User Manual
23
2.5 Main Menu
In the Main menu, there are the following items:
Color
Image Setting
Position
OSD Menu
Language
Misc.
Exit
For Color, check out the following:
Contrast
Brightness
Color Adjust
Color Temp
Back
ARCDIS-1XX (TB-6028) User Manual
24
For Image setting, check out the following:
Clock
Phase
Gamma
Sharpness
Back
In the Position, there are the following:
H. Position
V. Position
Back
ARCDIS-1XX (TB-6028) User Manual
25
In the OSD menu, there are:
OSD H. Pos.
OSD V. Pos.
OSD Timer
Back
In the Language menu, there are:
English
Frances
Germany
Spanish
Traditional Chinese
Simplified Chinese
Japanese
ARCDIS-1XX (TB-6028) User Manual
26
In the Misc menu, there are:
Signal Source
Select VGA: Analogue VGA Input
Select DVI: Digital DVI-D Input
Select AV: Composite Video Input
Select SV: S-Video Video Input
Reset
Back
ARCDIS-1XX (TB-6028) User Manual
27
Chapter 3 Installation
3.1 Windows XP/2003/Vista/7 Universal Driver
Installation for PenMount 6000 Series
Before installing the Windows XP/2003/Vista/7 driver software, you must have the
Windows XP/2003/Vista/7 system installed and running on your computer. You must
also have one of the following PenMount 6000 series controller or control boards
installed: PM6500, PM6300.
3.2 Installing Software (Resistive Touch Screen Type)
If you have an older version of the PenMount Windows XP/2003/Vista/7 driver
installed in your system, please remove it first. Follow the steps below to install the
PenMount DMC6000 Windows XP/2003/Vista/7 driver.
Step 1. Click Next to continue.
ARCDIS-1XX (TB-6028) User Manual
28
Step 2. Read the license agreement. Click I Agree to agree the license agreement.
Step 3. Choose the folder in which to install PenMount Windows Universal Driver.
Click Install to start the installation.
ARCDIS-1XX (TB-6028) User Manual
29
Step 4. Wait for installation. Then click Next to continue.
Step 5. Click Continue Anyway.
ARCDIS-1XX (TB-6028) User Manual
30
Step 6. Click Finish to complete installation.
3.3 Software Functions (Resistive Touch Screen Type)
Upon rebooting, the computer automatically finds the new 9036CH5 control board.
The touch screen is connected but not calibrated. Follow the procedures below to
carry out calibration.
1. After installation, click the PenMount Monitor icon “PM” in the menu bar.
2. When the PenMount Control Panel appears, click “Calibrate”.
PenMount Control Panel
The functions of the PenMount Control Panel are Calibrate, Multiple Monitors, Tools,
and About, which are explained in the following sections.
Device
In this window, you can find out that how many devices are detected on your
system.
ARCDIS-1XX (TB-6028) User Manual
31
Standard
Calibration
Click this button and arrows appear pointing to red squares. Use
your finger or stylus to touch the red squares in sequence. After
the fifth red point calibration is complete. To skip, press “ESC”.
Advanced
Calibration
Advanced Calibration uses 4, 9, 16 or 25 points to effectively
calibrate touch panel linearity of aged touch screens. Click this
button and touch the red squares in sequence with a stylus. To
skip, press “ESC”.
Calibrate
This function offers two ways to calibrate your touch screen. “Standard Calibration”
adjusts most touch screens. “Advanced Calibration” adjusts aging touch screens.
Standard Calibration
Step 1. Please select a device then click “Configure”. You can also double click the
device too.
ARCDIS-1XX (TB-6028) User Manual
32
Step 2. Click Standard Calibration
NOTE: The older the touch screen is, the more Advanced Mode calibration points
you need for an accurate calibration. Use a stylus during Advanced
Calibration for greater accuracy.
ARCDIS-1XX (TB-6028) User Manual
33
Advanced Calibration – click Advanced Calibration
Plot Calibration Data
Check this function and a touch panel linearity comparison
graph appears when you have finished Advanced
Calibration. The blue lines show linearity before calibration
and black lines show linearity after calibration.
Multiple Monitors
Multiple Monitors support from two to six touch screen displays for one system.
The PenMount drivers for Windows XP/2003/Vista/7 support Multiple Monitors. This
function supports from two to six touch screen displays for one system. Each
monitor requires its own PenMount touch screen control board, either installed
inside the display or in a central unit. The PenMount control boards must be
connected to the computer COM ports via the RS-232 interface. Driver installation
procedures are the same as for a single monitor. Multiple Monitors support the
following modes:
ARCDIS-1XX (TB-6028) User Manual
34
Windows Extends Monitor Function
Matrox DualHead Multi-Screen Function
nVidia nView Function
NOTE: The Multiple Monitor function is for use with multiple displays only.
Do not use this function if you have only one touch screen display.
Please note once you turn on this function the rotating function is
disabled.
Enable the multiple display function as follows:
1. Check the Multiple Monitor Support box; then click Map Touch Screens to
assign touch controllers to displays.
2. When the mapping screen message appears, click OK.
3. Touch each screen as it displays “Please touch this monitor”. Following this
sequence and touching each screen is called mapping the touch screens.
ARCDIS-1XX (TB-6028) User Manual
35
4. Touching all screens completes the mapping and the desktop reappears on
Draw
Tests or demonstrates the PenMount touch screen
operation.
Right Button Icon
Enable right button function. The icon can show on
Desktop or System Tray (menu bar).
the monitors.
5. Select a display and execute the “Calibration” function. A message to start
calibration appears. Click OK.
NOTES:
1. If you use a single VGA output for multiple monitors, please do not use the
Multiple Monitor function. Just follow the regular procedure for calibration on
each of your desktop monitors.
2. The Rotating function is disabled if you use the Multiple monitor function.
3. If you change the resolution of display or screen address, you have to redo
Map Touch Screens, so the system understands where the displays are.
Tools
ARCDIS-1XX (TB-6028) User Manual
36
About
This panel displays information about the PenMount controller and this driver
version.
PenMount Monitor Menu Icon
The PenMount monitor icon (PM) appears in the menu bar of Windows
XP/2003/Vista/7 system when you turn on the PenMount Monitor in the PenMount
Utilities.
The PenMount Monitor has the following functions:
ARCDIS-1XX (TB-6028) User Manual
37
Control Panel
Open Control Panel Windows
Beep
Setting Beep function for each device
Right Button
When you select this function, a mouse icon appears in
the right-bottom of the screen.
Click this icon to switch between Right and Left Button functions.
Exit
Exits the PenMount Monitor function.
Configuring the Rotation Function
1. Install the rotation software package.
2. Choose the rotating function (0°, 90°, 180°, 270°) in the 3
calibration screen appears automatically. Touch this point and rotation is
mapped.
rd
party software. The
NOTE: The rotating function is disabled if you use Monitor Mapping
ARCDIS-1XX (TB-6028) User Manual
38
3.4 Installing Software (Projected Capacitive Touch)
Step 1. Insert Driver CD, the screen below would appear. Click Next to continue.
Step 2. Select I accept the terms of the license agreement. Click Next.
ARCDIS-1XX (TB-6028) User Manual
39
Step 3. Click Install RS232 interface driver, then click Next to continue.
Step 4. Select None. Click Next.
Step 5. Click OK.
ARCDIS-1XX (TB-6028) User Manual
40
Step 6. Click Support Muti-Monitor System. Click Next.
Step 7. Go to C:\Program Files\eGalaxTouch. Click Next.
ARCDIS-1XX (TB-6028) User Manual
41
Step 8. Click Next.
Step 9. Tick Create a eGalaxTouch Utility shortcut on desktop. Click Next.
ARCDIS-1XX (TB-6028) User Manual
42
Step 10. Wait for installation.
Step 11. Click Yes to do 4 point calibration.
ARCDIS-1XX (TB-6028) User Manual
43
3.5 Software Functions (Projected Capacitive Touch)
General
In this window, you can see there is USB Controller. Click OK to continue.
Monitor Mapping
to adjust touch panel
Add
to search for device
ARCDIS-1XX (TB-6028) User Manual
44
Setting
Beep
Beep On Touch
Beep On Release
Beep From System Beep
Beep From Sound Card
Linearization Style
9 points
25 points
Double Click Time
Shorter
Longer
Double Click Area
Smaller
Bigger
Normal mode
Simulate the mouse mode
ARCDIS-1XX (TB-6028) User Manual
45
Option
Function
Enable Constant Touch
Enable Auto Right Click
Enable Touch
Enable Cursor Stabilization
Constant Touch Area
Auto Right Click Time
ARCDIS-1XX (TB-6028) User Manual
46
Tools
Click OK to continue the settings.
4 Points Calibration
Do 4 points alignment to match display.
Clear and Calibrate
Clear linearization parameter and do 4 points alignment.
Linearization
Do 9 points linearization for better touchscreen linearity.
Draw Test
Do draw test to verify the touch accuracy.
ARCDIS-1XX (TB-6028) User Manual
47
Display
In this window, it shows the mode of display.
Enable Multiple Monitors.
Map to main display if system has only one display monitor
Full Screen
Lower Screen
Left Screen
Upper Screen
Right Screen
ARCDIS-1XX (TB-6028) User Manual
48
Other
Other mode of display. Quarter1~4 and Customized area.
Active Area
Drag active area to enable Active Area Function.
ARCDIS-1XX (TB-6028) User Manual
49
Hardware
Saturn Hardware Configuration
ARCDIS-1XX (TB-6028) User Manual
50
About
To display information about eGalaxTouch and its version.
ARCDIS-1XX (TB-6028) User Manual
51
Appendix A: Board Descriptions & Specifications
Model
Function Descriptions
TB-6028
AD board,VGA /DVI-D/RCA input,LVDS output
TB-6028TU
AD board,VGA /DVI-D/RCA input,LVDS output,USB/Touch controller
TB-6028TR
AD board,VGA /DVI-D/RCA input,LVDS output,RS232/Touch controller
TB-6028TRS
AD board, VGA/DVI-D input, LVDS output, RE232/Touch controller
Specifications
Board Size
170 x 113 x 1.6 mm
Chipset
Realtek RTD2533VH
PenMount 6000
Input
1 x VGA input Port
1 x DB15 connector（Default）
1 x 1*12Pin Wafer （option）
1 x DVI-D input
1 x RCA input（option）
1 x RS232 input port, DB9 connector (option)
1 x USB 2.0 input port, Single USB connector (option)
1 x Line in port, Phone Jack (option)
1 x 3-pin power input connector (Wide range DC+9V~36V)
1 x OSD function support
1 x Touch controller(option)
Output
1 x 24bit Dual Channel LVDS output interface
1 x Audio Power Amplifier (Line out, option)
1 x USB 2.0 Port（option）
Resolution
Up to 1920 x1200 for LVDS
Power input
DC9V-36V
Temperature
Operating: -20℃ to 70℃
Storage: -40℃ to 85℃
Humidity
0% - 80%, non-condensing, operating
EMI/EMS
Meet CE/FCC class A
Descriptions
Specifications
ARCDIS-1XX (TB-6028) User Manual
52
Board Dimensions
(units :mm)
Figure A: Dimensions of TB-6028
ARCDIS-1XX (TB-6028) User Manual
53
Appendix B: Panel Mounting and VESA Mounting
*Notice：
Tighten the mounting clip screws by hand until the gasket seal contacts
the mounting surface uniformly.
Tighten the mounting clips screws to a torque of 8 ~ 10 kgf-cm by using
the specified sequence, making sure not to overtighten.
*Tighten the mounting clips to the specified torque to provide a proper
seal and to prevent damage to the product. Aplex assumes no
responsibility for water or chemical damage to the product or other
equipment within the enclosure due to improper installation.
The ARCDIS-1XX is designed to be panel-mounted and VESA mounted as shown in
Picture. Just carefully place the unit through the hole and tighten the given screws
from the rear to secure the mounting.
Figure B: Panel mounting and VESA mounting
ARCDIS-1XX (TB-6028) User Manual
Loading...