Aplex ADP-1125A User Manual
1
ADP-1XX5A
High Brightness Display Monitor
User Manual
Release Date Revision
Feb. 2015 V1.2
®2015 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw URL:
www.aplex.com.tw
ADP-1XX5A User Manual
2
Warning!___________________________
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may
cause interference to radio communications. It has been tested and found to
comply with the limits for a Class A computing device pursuant to FCC Rules,
which are designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case
the user at his own expense will be required to take whatever measures may
be required to correct the interference.
Electric Shock Hazard – Do not operate the machine with its back cover
removed. There are dangerous high voltages inside.
Disclaimer
This information in this document is subject to change without notice. In no event
shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this
document or in any related materials.
ADP-1XX5A User Manual
3
Table of Contents
Warning!/Disclaimer…………………………………………………………………………..2
Chapter 1 Getting Started
1.1 Features………………………………………………………………………………….5
1.2 Specifications…………………………………………………………………………5
1.3 Dimensions…………………………………………………………………………….6
1.4 Brief Description of ADP-1XX5A……………………………………………..9
1.5 Display Mode……………………………………………………………………….10
Chapter 2 OSD
2.1 Front Panel OSD Functions……………………………………………………11
2.2 OSD Controls………………………………………………………………………..12
2.3 Main Menu…………………………………………………………………………..13
Chapter 3 Control Board
3.1 Introduction to PenMount 9036CH5 Control Board (for RS-232
interface Touch Screen)………………………………………………………..15
3.2 Introduction to PenMount 6300A5 Control Board (for USB
interface Touch Screen)………………………………………………………..18
Chapter 4 Installation
4.1 Windows XP/2003/Vista/7 Universal Driver Installation for
PenMount 9000/6000 series…………………………………………………21
4.2 Configuring the PenMount Windows XP/2003/Vista/7 Driver..24
4.3 Uninstall the PenMount Windows XP/2003/Vista/7 Driver…...32
Chapter 5 Software
5.1 Software Functions……………………………………………………………….33
5.2 Software Function Description……………………………………………..34
ADP-1XX5A User Manual
4
Figures
Figure 1.1: Dimensions of ADP-1125A.…………..………………..…………..6
Figure 1.2: Dimensions of ADP-1155A…………….……………………………7
Figure 1.3: Dimensions of ADP-1195A…………….……………………………8
Figure 1.4: Front View of the ADP-1XX5A……….……………………………9
Figure 1.5: Rear View of the ADP-1XX5A…………...…………………………9
Figure 3.1: Bird’s Eye View of PM9036CH5 Control Board………….15
Figure 3.2: Mechanical Size of PM9036CH5 Control Board…………16
Figure 3.3: Bird’s Eye View of PM6300A5 Control Board…………….18
Figure 3.4: Mechanical Size of PM6300A5 Control Board……………19
ADP-1XX5A User Manual
5
Chapter 1___________Getting Started
Mode
Specs
ADP-1125A
ADP-1155A
ADP-1195A
LCD
Display Type
12.1”
15”
19”
Max. Resolution
800x600
1024x768
1280x1024
Max. Color
16.2M
16.2M
16.7M
Luminance (cd/m²)
1,000nits
Viewing Angle
(H/V)
H:178 / V:178
H:140 / V:125
H:170/V:160
Backlight Lifetime
50,000 Hours
Hardware
OSD Control
On the rear side
External I/O Port
Default:
VGA Input
AC 100-240V input
Optional:
DVI
Video
S-Video
Touch I/O
Power
Power Input
AC 100-240V
1.1 Features
12.1"/15”/19” High Brightness (1,000 cd/m2) TFT LCD
NEMA 4 / IP 65 compliant front bezel
Rear OSD
VESA 75-75 and panel Mount
Front glass with Anti-Reflection, optional touch screen.
AC 100-240V power input
Default: VGA input, Optional for DVI, Video and S-Video input
1.2 Specifications
ADP-1XX5A User Manual
6
Touch Screen
Touch Screen Type
Resistive Touch
TS Control Board
AMT 9036 (RS-232) or 6300 (USB)
Interface
RS-232 or USB
Light Transmission
80%
Mechanical Specifications
Construction
Metal front panel + Metal housing, Pantone 413C
Front Panel
Anti-Reflection Glass
IP Rating
Front Panel IP 65
Mounting
Panel/VESA 75x75
Dimensions
340 x 260 x 59
410 x 310 x 59.7
467 x 379 x 68
Environmental Specifications
Operating
Temperature
0~50℃
Storage
Temperature
-20~60℃
Storage Humidity
10~90% @40℃ (non-condensing)
Certificate
CE / FCC Class A
1.3 Dimensions
Figure 1.1: Dimensions of ADP-1125A
ADP-1XX5A User Manual
7
Figure 1.2: Dimensions of ADP-1155A
ADP-1XX5A User Manual
8
Figure 1.3: Dimensions of ADP-1195A
ADP-1XX5A User Manual
9
1.4 Brief Description of the ADP-1XX5A
ADP-1125A/1155A/1195A is a Steel Enclosure LCD Display that comes with a
12.1-inch/15-inch/19-inch (luminance of 1000 cd/m²) TFT LCD, and more outstanding
features, thus giving you the best in monitoring and control applications.
The front panel of the display is sealed IP65 rating when it is VESA-mounted in a
NEMA rated cabinet or enclosure. It is optional to be equipped with a resistive touch
screen.
Figure 1.4: Front View of ADP-1XX5A
Figure 1.5: Rear View of ADP-1XX5A
ADP-1XX5A User Manual
10
1.5 Display Mode
Display Mode
Hori. Sync (KHz)
Vert. Sync. (Hz)
31
60
VGA 640 x 480
38
72 38
75 35
56
SVGA 800 x 600
38
60 48
72 47
75
48
60
XGA 1024 x 768
56
70 60
75
SXGA
1152 x 864
68
75
1280 x 1024
64
60
80
75
ADP-1XX5A User Manual
11
Chapter 2____________________OSD
Cable Not Connected
2.1 Front Panel OSD Functions
Auto Adjust Up/Left Down/Right Power
Menu/Entry Power Indicator
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press
(don’t let them go) the buttons until the AC power cord is connected and the
“RGB” appears on the top left corner of your screen. Now it can be put into the
burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord.
Then press the button (If not workable, press the button and don’t let
them go) until the AC power cord is connected. Please don’t let your fingers go until
the AC power cord is connected again and the wording of “RGB” appears on the top
left corner of your screen, and wait for 3 seconds. Under the non-signal entry
situation, if is seen, exit is thus successfully made.
ADP-1XX5A User Manual
12
When the Burn-in Mode is Unable to Eradicate…
1.) If the “RGB” is still on the top left corner of the screen, press to enter
“Miscellaneous” and choose “Reset”, and then Yes, and press . When the
screen goes black, disconnect power and repeat the above steps.
2.) If the “RGB” is not found, disconnect the AC power cord first. Then press the
buttons (don’t let them go) until the AC power cord is connected, and
wait for 2 to 3 seconds. When “RGB” appears, repeat the above steps.
2.2 OSD Controls
To make any adjustment, select the following:
1. Press (Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
3. Press (Menu) and then choose the item with the ( / or +/-) key.
4. Press (Menu) and then adjust the quality with the ( / or +/-) key.
ADP-1XX5A User Manual
Loading...