ADP-1081A Display Monitor
User Manual
Release Date Revision
Apr 2011 V0.1
Approved By
RD PM FAE
®2011 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail:
ADP-1081A User Manual 1
aplex@aplex.com.tw URL: www.aplex.com.tw
Warning!___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
Used in accordance with the instructions manual may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interence when
Operated in a commercial environment. Operation of this equipment in a residential area is likely
To cause interference in which case the user at his own expense will be required to take whatever
Measures may be required to correct the interference
Electric Shock Hazard – Do not operate the workstation with its back cover removed. There are
dangerous high voltages inside.
Disclaimer
This information in this document is subject to change without notice. In no event shall Aplex Technology
Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or
misuse of information in this document or in any related materials.
ADP-1081A User Manual 2
Table of Contents______________________
Warning!………………………………….………………………………………….……..….2
Disclaimer…………………………….…………………………………….…………………2
Chapter 1 Getting Started
1.1 Features……………….……………………………………………..…….…4
1.2 Specifications………………………………………………………..……….4
1.3 Dimensions…………………………………...……………………..…….…5
1.4 Brief Description......................................................................................6
1.5 Display Mode…………………………………………………………..…….7
Chapter 2 OSD
2.1 Rear Panel Controls………….………………………………….…………8
2.2 OSD Controls…………………………………………………….……..…..8
2.3 Main Menu…..……………………………………………………...……….9
2.4 AD Board OSD Functions…………………………………….….…..……11
Figures
Figure 1.1: Dimensions of ADP-1081A.…………..……………………..……..5
Figure 1.2: Front View…..….…………………………………………….…..….6
Figure 1.3: Rear View…………………..…………………………………...…...6
Figure A: VESA mounting………………………………...………….…....…...12
Appendix
VESA mounting…..….………………………………………………..………...12
ADP-1081A User Manual 3
Chapter 1_____________________________
1.1 Features
● 8" TFT LCD Backlight with resolution of 800x600
● Plastic Housing
● Resistive touch screen (optional)
● Default VGA
● Optional for VGA,DVI and Audio line in, line out
● Default: DC 11~32V input
1.2 Specifications
Display
● Display: 8” SVGA (800 x 600) color TFT LCD
● Maximum resolution: 800 (H) × 600(V)
● Maximum colors: 262K
● Luminance: 400cd/m2
● Viewing angle: 130/110 (H/V)
● Backlight life: 40,000 hrs.
● Touch screen: Resister Type
● Power Supply: TB-6025 11~32V
Mechanical
● Construction: Plastic Housing / Black
● Front Panel IP65
● Mounting: VESA Mount 75x75mm
● Dimensions: 231x176x57 mm
Environmental
●
Operating temperature: 0 to 50℃
● Storage temperature: -20 to 60℃
● Relative humidity: 10 to 90% @40℃, non-condensing
● Vibration: 1G / 5 ~ 500Hz (Random) / Operation
● Shock: 15G peak acceleration (11 msec. duration)/operation
● EMC: CE, FCC Class A
ADP-1081A User Manual 4
1.3 Dimensions
ADP-1081A User Manual 5
Figure 1.1: Dimensions of the ADP-1081A
1.4 Brief Description of the ADP-1081A
ADP-1081A is an 8-inch color TFT Industrial display monitor with fanless design. It comes with an
overlay resistive touch screen that is easy to use and maintain. It’s working temperature is 0~50℃,
and has well anti- vibration, dirt and dust abilities. The front panel of the display monitor is sealed with
gasket for IP 65 has rating when it is VESA mount. The VGA connector and wide range DC 12~32 V
power input is standard, DVI-D connector and DC 12V input are for option. There is also a five button
OSD keypad on the rear side.
Figure 1.2: Front View of the ADP-1081A
Figure 1.3: Rear View of the ADP-1081A
ADP-1081A User Manual 6
1.5 Display Mode
Display Mode Hori. Sync (KHz) Vert. Sync. (Hz)
31 60
VGA 640 x 480 38 72
38 75
35 56
SVGA 800 x 600 38 60
48 72
47 75
48 60
XGA 1024 x 768 56 70
60 75
SXGA
1152 x 864 68 75
64 60
1280 x 1024
80 75
ADP-1081A User Manual 7
Chapter 2_____________________________
2.1 Rear Panel Controls
Power switch: To turn ON or OFF the power
Shift the icon to the left side or shift it up
Shift the icon to the right side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
2.2 OSD Controls
To make any adjustment, select the following:
1. Press (Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
3. Press (Menu) and then choose the item with the ( / or +/-) key.
4. Press (Menu) and then adjust the quality with the ( / or +/-) key.
ADP-1081A User Manual 8
2.3 Main Menu
In the Main Menu, the following items:
Auto Adjust
●
Luminance
●
Management
●
Color
●
Volume
●
1: Luminance, the following items:
Brightness
Contrast
Black Level
Sharpness
Exit
2: Management, the following items:
OSD
●
Language
●
Recall
●
Information
●
Exit
●
H. Position
V. Position
Pixel Clock
Phase
Exit
3: Color, the following items:
9300
6500
sRGB
User Preset
Exit
ADP-1081A User Manual 9
4: For Color, User Preset:
Red
Green
Blue
Exit
5: OSD, the following items:
H. Position
V. Position
OSD Time
Exit
6: Language, the following items:
English
●
French
●
German
●
Italy
●
Spanish
●
Japanese
●
Traditional Chinese
●
Simplified Chinese
●
7: Recall, the following items:
Recall Color
Recall All
Exit
8: Information, the following items:
Aspect Ratio
Display Information
Exit
ADP-1081A User Manual 10
2.4 AD Board OSD Functions
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go)
the buttons until the AC power cord is connected and the “RGB” appears on the top left corner
of your screen. Now it can be put into the burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the
button (If not workable, press the button and don’t let them go) until the AC power cord is
connected. Please don’t let your fingers go until the AC power cord is connected again and the
wording of “RGB” appears on the top left corner of your screen, and wait for 3 second. Under the
non-signal entry situation, if is seen, exit is thus successfully made.
Cable Not Connected
When the Burn-in Mode is Unable to Eradicate…
1.) If the “RGB” is still on the top left corner of the screen, press to enter “Miscellaneous” and
Choose “Reset”, and then Yes, and press . When the screen goes black, disconnect power and
repeat the above steps.
2.) If the “RGB” is not found, disconnect the AC power cord first. Then press the buttons
(don’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When
“RGB” appears, repeat the above steps.
3.) Functions of OSD Keys
Auto Adjust Up/Left Down/Right Power
Menu/Entry Power Indicator
ADP-1081A User Manual 11
Appendix_____________________________
VESA 75 Mounting
The ADP-1081A display monitor is designed to be panel-mounted as shown in Figure A. Just carefully
mount the arm onto the rear of the unit by fastening the given four screws as shown in Figure A.
Figure A: VESA-mounting of the ADP-1081A
ADP-1081A User Manual 12
Loading...