Aplex ACS-2702 User Manual

ACS-2702

Intel Atom N2600 IP67 Waterproof Box PC

User Manual

Release Date Revision

Jul. 2015 V1.0

®2015 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan

Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan

Tel: [phone] Fax: [phone] E-mail: [e-mail] URL: www.aplextec.com

Revision History

Reversion

Date

Description

1.0

2015/07/08

Official Version

ACS-2702 User Manual 1

Warning!___________________________

Electric Shock Hazard – Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.

This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply with
the limits for a Class A computing device pursuant to FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to
take whatever measures may be required to correct the interference.

Disclaimer

This information in this document is subject to change without notice. In no event shall
Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this document or in
any related materials.

ACS-2702 User Manual 2

Accessories (as ticked) included in this package are:

□ Adaptor

□ Driver & manual CD disc

□ Other.___________________(please specify)

Packing List

Safety Precautions

Follow the messages below to prevent your systems from damage:

◆ Avoid your system from static electricity on all occasions.

◆ Prevent electric shock. Don‘t touch any components of this card when the card

is power-on. Always disconnect power when the system is not in use.

◆ Disconnect power when you change any hardware devices. For instance, when

you connect a jumper or install any cards, a surge of power may damage the
electronic components or the whole system.

ACS-2702 User Manual 3

Table of Contents

Revision History…………………………………………………………………………………………….1

Warning!/Disclaimer………………..............................…………………………….……..….2

Packing List/Safety Precautions.....………………………………………………………………..3

Chapter 1 Getting Started

1.1 Features……………………………………………………………………………………………5

1.2 Specifications……………………………………………………………………………………5

1.3 Dimensions……………………………………………………………………………………….6

1.4 Brief Description of ACS-2702……………………………………………………………7

Chapter 2 Hardware

2.1 Motherboard Introduction……..……………..…………………..………………..…..8

2.2 Specifications……………………………….……………………………..…………………...8

2.3 Jumpers Setting and Connectors…………..............................................12

Chapter 3 BIOS Setup

3.1 Operations after POST Screen.............................................................21

3.2 BIOS Setup Utility….............................................................................21

3.3 Main Settings…....................................................................................22

3.4 Advanced Settings...............................................................................23

3.5 Chipset Settings...................................................................................29

3.6 Boot Settings…....................................................................................32

3.7 Security Settings..................................................................................34

3.8 Save and Exit Settings.........................................................................35

Chapter 4 Installation of Drivers

4.1 Intel Chipset Driver.…………………………………………..…….………………………38

4.2 Intel Graphics Media Accelerator Driver………………....……….……………..41

4.3 Intel (R) Network Adapter……..………………………………….…………………….44

4.4 Realtek ALC662 HD Audio Driver Installation……………….…….……………46

Figures

Figure 1.1: Dimensions of ACS-2702…………....………………………………...……...6

Figure 1.2: Overview of ACS-2702……………………………………………….....……...7

Figure 2.1: Mainboard Dimensions……………………………..………………..………10

Figure 2.2: Jumpers and Connectors Location_ Board Top…………………....11

Figure 2.3: Jumpers and Connectors Location_ Board Bottom………………11

ACS-2702 User Manual 4

Chapter 1 Getting Started

System

Processor

Intel Atom Processor N2600 1.6GHz CPU

System Chipset

Intel NM10 Express Chipset

System Memory

Onboard 2GB DDR III 800MHz

Outside I/O Ports

2 x USB 2.0 type A(by 1 x M12 8pin connector)

1 x GbE LAN by Realtek RTL8111E(M12 connector)

1 x RS-232 DB-9, COM2(M12 connector)

1 x RS-232/422/485 DB-9, COM1, Default RS-232 (M12

connector)

1 x VGA (M12 connector)

1 x DC Power (M12 connector)

Storage

1 x 2.5” SATA II HDD

1 x SD slot, up to 32GB

Expansion Slots

1 x Internal Mini-PCIe slot half size

OS Support

Windows embedded standard 7, Windows 7 Pro for

embedded, Windows CE 6.0

Power

Power Input

9~36V DC

Power Consumption

MAX: 10.1W

Mechanical

Construction

Stainless Steel Chassis

Mounting

Wall Mount

IP Rating

IP67

Dimension

200 x 250 x 53 mm

Net Weight

3.2Kg

1.1 Features

 Fanless design
 Intel Atom N2600 1.6GHz CPU built-in
 Onboard 2GB DDR III 800MHz
 Wide Range 9~36V DC Power Input
 IP67 Rating.

1.2 Specifications

ACS-2702 User Manual 5

Environmental

Operating Temperature

-20~60 °C

Storage Temperature

-40~85 °C

Storage Temperature

10%~90%@ 40℃, non-condensing

Certificate

Meet CE / FCC

1.3 Dimensions

Figure 1.1: Dimensions of ACS-2702

ACS-2702 User Manual 6

1.4 Brief Description of ACS-2702

The ACS-2702 is a fanless high-efficiency thermal solution Box PC, powered by Intel

Atom Processor N2600 1.6GHz CPU and supporting 2GB DDR3 800 MHz onboard. It comes

with 2 x USB 2.0, 1 x LAN, 2 x COM ports, 1 x VGA and 1 x DC Power all by M12 connector. It

supports 1 x 2.5” SATAII HDD space, 1 x SD slot up to 32GB, and 9~36V DC wide-ranging

power input. It is ideal for Industrial Automation, Factory Automation, Machine Vision,

Process Control, Data Terminal, TI, Surveillance, etc. and running factory operations from

small visual interface and maintenance applications to large control process applications. The

ACS-2702 works very well along with any of our Display series and it absolutely can provide

an easy way to perform control and field maintenance.

Figure 1.2: Overview of ACS-2702

ACS-2702 User Manual 7

Chapter 2 Hardware

Specifications

Board Size

170mm x 113mm

CPU Support

Intel Atom N2600 /1.60GHz (2cores,3.5W, onboard）

Intel Atom D2550 /1.86GHz(2cores,10W, option)

Chipset

Intel NM10 Express

Memory Support

Onboard 2GB DDRIII SDRAM (N2600)

Onboard 4GB DDRIII SDRAM (D2550)

Graphics

Integrated Intel GMA 3600 (N2600)

Integrated Intel GMA 3650 (D2550)

Display Mode

1 x CRT Port

1 x HDMI Port

1 x LVDS1 (18/24-bit single LVDS)

Support

Resolution

Up to 1920 x1200 for CRT

Up to 1920 x1200 for HDMI

Up to 1366 x768 for LVDS1 (N2600)

Up to 1440 x 900 for LVDS1 (D2550)

Dual Display

CRT+LVDS1

CRT+HDMI

LVDS1+HDMI

Super I/O

Winbond W83627UHG-E

BIOS

AMIBIOS

2.1 Motherboard Introduction

SBC-7106 is a 4" industrial motherboard developed on the basis of Intel Cedarview-M

Processors and NM10, which provides abundant peripheral interfaces to meet the needs of

different customers. Also, it features dual GbE ports, 3-COM ports and one Mini PCIE

configuration, one VGA port, one HDMI port, one LVDS interface. To satisfy the special needs

of high-end customers, CN1 and CN2 and CN3 richer extension functions. The product is

widely used in various sectors of industrial control.

2.2 Specifications

ACS-2702 User Manual 8

Storage

1 x SATA Connector (7P)

1 x SATA Connector (7P+15P)

1 x SD Socket (USB to SD)

Ethernet

2 x PCIe Gbe LAN by Realtek RTL8111E

USB

2 x USB 2.0 (type A)stack ports (USB4/USB5)

2 x USB 2.0 Pin header for CN3 (USB2/USB3)

2 x USB 2.0 Pin header for CN1 (USB0/USB1)

1 x USB 2.0 for MPCIE1 (USB7)

Serial

1 x RS232/RS422/RS485 port, DB9 connector for external (COM1)

pin 9 w/5V/12V/Ring select

1 x RS232 port, DB9 connector for external (COM2)

pin 9 w/5V/12V/Ring select

1 x RS422/485 header for CN2 (COM3)

2 x UART for CN3 (COM5,COM6)

Digital I/O

8-bit digital I/O by Pin header (CN2)

4-bit digital Input

4-bit digital Output

4-bit digital I/O by Pin header (CN3)

2-bit digital Input

2-bit digital Output

Battery

Support CR2477 Li battery by 2-pin header

Audio

Support Audio via Realtek ALC662 HD audio codec

Support Line-in, Line-out, MIC by 2x6-pin header

Keyboard /Mouse

1 x PS2 keyboard/mouse by 1x6 box pin header (CN3)

Expansion Bus

1 x mini-PCI-express slot

1 x PCI-express (CN3)

Touch Ctrl

1 x Touch ctrl header for TCH1 (COM4)

Power

Management

Wide Range DC10V~30v input

1 x 3-pin power input connector

Switches and

LED Indicators

1 x Power on/off switch (CN1)

1 x Reset switch (CN1)

1 x Power LED status (CN1)

1 x HDD LED status (CN1)

1 x Buzzer

ACS-2702 User Manual 9

External I/O port

2 x COM Ports (COM1/COM2)

2 x USB 2.0 Ports (stack)

2 x RJ45 GbE LAN Ports

1 x HDMI Port

1 x Stack audio Jack (Line out)

Watchdog Timer

Software programmable 1 – 255 second by Super I/O

Temperature

Operating: -20℃ to 70℃

Storage: -40℃ to 85℃

Humidity

5% - 95%, non-condensing, operating

Power

Consumption

12V /0.95A (Intel Atom N2600 processor with 2GB DDR3 DRAM)

EMI/EMS

Meet CE/FCC class A

(units :mm)

Figure 2.1: Motherboard Dimensions

ACS-2702 User Manual 10

2.2.1 Jumpers Setting and Connectors

Board Top

Figure 2.2: Jumpers and Connectors Location_ Board Top

Board Bottom

Figure 2.3: Jumpers and Connectors Location_ Board Bottom

ACS-2702 User Manual 11

2.3 Jumpers Setting and Connectors

JP5

Mode

Open

ATX Power

Close

Auto Power on (Default)

JP3 CMOS

Open

NORMAL (Default)

Close 1-2

Clear CMOS

Model

JP3

SBC-7106-N2600

No

SBC-7106-N2600-P

No

SBC-7106-D2550

Y

es

Pin#

Signal Name

Pin1

VBAT

PIN2

Ground

1. JP5:
(2.0mm Pitch 1X2 box Pin Header), ATX Power and Auto Power on jumper setting.

2. JP3:

(2.0mm Pitch 1X2 Pin Header)CMOS clear jumper, CMOS clear operation will
permanently

Procedures of CMOS clear:

a) Turn off the system and unplug the power cord from the power outlet.
b) To clear the CMOS settings, use the jumper cap to close pins 1 and 2 for about 3

seconds then reinstall the jumper clip back to pins open.

c) Power on the system again.
d) When entering the POST screen, press the <F1> or <DEL> key to enter CMOS Setup

Utility to load optimal defaults.

e) After the above operations, save changes and exit BIOS Setup.

reset old BIOS settings to factory defaults.

3. BAT1 :
(1.25mm Pitch 1X2 box Pin Header) 3.0V Li battery is embedded to provide power for

CMOS.

4. DC_IN1:

(5.08mm Pitch 1x3 Pin Connector),DC9V~32V System power input connector。

ACS-2702 User Manual 12

Pin#

Power Input

Pin1

DC+9V~32V

Pin2

Ground

Pin3

FG

Model

DC_IN1

SBC-7106-N2600

180°Connector

SBC-7106-N2600-P

45°C onnector

SBC-7106-D2550

45°C onnector

Pin#

Signal Name

1

Ground

2

VCC

3

Rotation detection

Model

CPU_FAN1

SBC-7106-N2600

No

SBC-7106-N2600-P

No

SBC-7106-D2550

Y

es

Signal Name

Pin#

Pin#

Signal Name

CRT_RED

1

2

Ground

CRT_GREEN

3

4

Ground

CRT_BLUE

5

6

VGA_EN

CRT_H_SYNC

7

8

CRT_DDCDATA

CRT_V_SYNC

9

10

CRT_DDCCLK

Ground

11

12

Ground

VGA hot plug setting for Windows XP：

VGA1（Pin Header）

Function

5. CPU_FAN1:
(2.54mm Pitch 1x3 Pin Header), Fan connector, cooling fans can be connected directly

for use. You may set the rotation condition of cooling fan in menu of BIOS CMOS Setup.

Note:

Output power of cooling fan must be limited under 5W.

6. VGA1:
(CRT 2.0mm Pitch 2X6 Pin Header), Video Graphic Array Port, Provide 2x6Pin cable to

VGA Port.

ACS-2702 User Manual 13

Pin4-Pin6（Close）

VGA Simulation Disabled

Pin4-Pin6（Open）

VGA Simulation Enabled

use the 2.0mm jumper cap to close pin 4 and pin6

JP1 Pin#

Function

Close 1-2

COM1 RI (Ring Indicator) (default)

Close 3-4

COM1 Pin9=+5V (option)

Close 5-6

COM1 Pin9=+12V (option)

Function

S_232 Pin#

RS232 (Default)

ON: Pin1, Pin2, Pin3, Pin4

RS422 (option)

OFF: Pin1, Pin2, Pin3, Pin4

RS485 (option)

OFF: Pin1, Pin2, Pin3, Pin4

Function

S_422 Pin#

RS232 (Default)

OFF: Pin1, Pin2, Pin3, Pin4

RS422 (option)

ON: Pin1, Pin2, Pin3, Pin4

RS485 (option)

ON: Pin1, Pin2, Pin3, Pin4

7. HDMI1:
(HDMI 19P Connector), High Definition Multimedia Interface connector.

8. JP1:
(2.0mm Pitch 2x3 Pin Header), COM1 jumper setting, pin 1~6 are used to select signal

out

of pin 9 of COM1 port.

9. S_232:
(Switch), COM1 jumper setting, it provides selectable RS232 or RS422 or RS485 serial

signal output.

10. S_422:

(Switch), COM1 setting, it provides selectable RS232 or RS422 or RS485 serial signal
output.

11. COM1:

(Type DB9),Rear serial port, standard DB9 Male serial port is provided to make a

direct connection to serial devices. COM1 port is controlled by pins No.1~6 of
JP1,select output Signal RI or 5V or 12V, For details, please refer to description of JP1
and S_232 and S_422 setting.

ACS-2702 User Manual 14