A&P Instruments X 3011, Ultra X 3011D User Manual

ULTRA X 3011
ULTRA X 3011D

Moisture analyser

To determine the moisture content in
almost all liquid, solid and paste-like
materials.

The principle is:
drying with simultaneous

Suitable for use in operations directly in
production facilities and laboratories.

a

&

p

instruments

Almost 70 years of experience with modern technology forms the basis for the ULTRA X moisture
analyser. Precision weighing technology, simple operation, good functionality and design and a
robust structure are combined in a practice-oriented manner.

Operating

Weigh the sample, pivot the radiator above it, the measurement

The radiation temperature can be set. In addition to the moisture and solid material, additional
measurement parameters can also optionally be displayed.The moisture content can be deter­mined using a timer or the automatic cut-out. Three criteria are individually set for the automatic
cut-out depending on the product properties: query start, weight reduction and query interval.

The measurement result remains on the display until the device is next used.

The reusable stainless steel sample dishes mean
an ongoing cost saving.

ULTRA X 3011D moisture analyser

mode

temp. C°

45

value (weight)

time

starts automatically and ends when the weight is constant.

T

All of the parameters can be changed in the menu using three

unit

buttons. The menu is shown in the LC display.

3

The ULTRA X 3011 can optionally be delivered with or without a
built-in printer.
The printout of all data is carried out in line with GLP.
Intermediate values can be printed out at selectable
intervals as needed.
All of the data are also output via the serial RS 232 interface and USB.
The printer can be switched off.

a&p instruments, Albert-Schweitzer-Str. 16, D-32758 Detmold, Tel. [phone], E-Mail: [e-mail]

Technical Data
ULTRA X 3011 / ULTRA X 3011D

Balance:

weighing range 210 g
resolution 0.001 g
sample volume max. 95 cm³
drying bowl 110 mm diameter

For Moisture measuring:

sample weight any, recommended minimum 4 g
power of heater 250 watts

automatic automatic drying until weight constant selectable in 3 different modes:

start measuring, measuring in intervals, weight loss/ measured during intervals.

timer 1 - 180 minutes

temperarture selectable from 40 °C up to 180 °C
measured values % moisture

% dry mass
% moisture ad actual sample weight
g solids per kg

measuring accuracy 0.01%

device identification
menu lock the menu to prevent accidantal changes to drying parameters

cal function is further available.

Communication:

4-digit ID for identifying the device

data output interface V24 RS 232
data signals all weight and measuring data in GLP-format with start time and variable interval print out

selectable date, time, total measuring time, type of sample

with Software ULTRA X DataChannel to transfer on PC as .xls data to Microsoft Excel,

.html date,
.xml date and

For using:

power supply 230 V 20%/ + 15 %

48 63 Hz
power consump. 275 VA
dimensions approx. l 385 x w 275 x h 420 mm over all
weight approx. 8.5 kg

Accessories: Part no: Using:

stainless-steel drying tray 1000282 sample tongs (2 sets supplied with the device)
tray tongs 1000230 for lifting the tray (supplied with the device)
power cable 1000190 power supply (supplied with the device)
calibtion weight F1 200 g 1000403 for claibrating the balance
aluminium foils 130 mm x 0.01 mm 1000016 for lining the drying tray
aluminium foils 130 mm x 0.03 mm 1000017 for lining the drying tray
foil press 1000062 for shaping the aluminium foil

.txt date.

Consumables:

paper for printer 58 mm 1000234 for integrated printer

durable 10 years, according to manufacturer

infrared heater 1000130 sparepart

a & p instruments e.K.

Inh. Peter Ukena
Albert-Schweitzer-Straße 16, D-32758 Detmold,
Tel. [phone], Fax [phone]
Internet: www.apinstruments.de, Email: [e-mail]

subject to technical modification