Power Inductors
SERIES
High Current Toroidal Inductors
HCT
HCTR
Actual Size
(HCT-44X)
Physical Parameters:
Package A B C D E F
Max. Max. Max.
HCT-37X 0.615 0.600 0.370 0.500 0.440 0.500
HCT-44X 0.665 0.665 0.400 0.560 0.490 0.560
HCT-50X 0.740 0.740 0.400 0.630 0.560 0.630
HCT-68X 0.945 0.940 0.400 0.820 0.700 0.820
Above dimensions in inches and unless otherwise stated all
tolerances are ± 0.010
Mechanical Configuration
Units are surface mount, low profile, self-leaded devices
Frequency Range 1kHz up to 1 MHz
Operating Temperature Range –30°C to +130°C
Leads Solder tinned
Materials Meet UL94V-0
Optional Tolerances As low as 10% available on some values.
Consult factory for details.
Maximum Power Dissipation at 25°C Ambient
HCT-37x, 0.9 W
HCT-44x, 1.0 W
HCT-50x, 1.1 W
HCT-68x, 1.2 W
Marking API; part number.
Example: HCT-504
API
HCT-504
Packaging Bulk; contact factory for tape & reel options.
-371
-372
-373
-374
-441
-442
-443
-444
-501
-502
-503
-504
-681
-682
-683
-684
DASH NUM
1.25
2.1
2.8
4.2
2.8
4.2
5.7
9.0
6.5
8.4
12.5
17.0
10.5
17.6
22.0
29.0
BER*
INDUCT
ELECTRICAL SPECIFICATIONS @ 25°C DC AMPS TO PRODUCE A MAXIMUM
TEMPERATURE RISE FROM 25°C AMBIENT
)
ANCE
25%
YPICAL
H) ±
T
(µ
Q
32
27
27
24
33
29
29
26
25
23
23
22
35
35
30
30
*Complete part # must include series # PLUS the dash #
For surface finish information, refer to www.delevanfinishes.com
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
L
& Q
T
F
EST
REQ
260
160
110
100
110
UENCY (kHz
(M
SRF
T
2.5
4.0
6.3
7.9
3.6
5.4
85
7.5
65
11.4
55
6.6
55
8.3
45
11.4
35
17.0
29
6.2
30
12.3
24
17.5
21
25.0
16
,
L)
Hz
YPICA
DC RESISTANCE
MAXIMUM (mΩ)
2.2
3.4
5.4
6.8
3.2
4.7
6.4
9.8
5.8
7.2
9.8
14.6
5.3
10.7
15.0
21.5
TYPICAL (mΩ)
DC RESISTANCE
5.73
4.58
3.62
3.23
5.13
4.23
3.60
2.91
3.97
3.55
3.04
2.49
4.35
3.06
2.58
2.16
5°C
9.75
7.78
6.17
5.49
8.73
7.20
6.13
4.95
6.75
6.04
5.17
4.23
7.40
5.21
4.40
3.67
15°C
12.30
9.87
7.82
6.97
11.00
9.14
7.78
6.28
8.56
7.66
6.56
5.37
9.39
6.60
5.58
4.66
25°C
14.30
11.40
9.10
8.10
12.80
10.60
9.05
7.31
9.96
8.91
7.63
6.25
10.90
7.68
6.49
5.42
35°C
16.00
12.80
10.10
9.04
14.30
11.80
10.00
8.15
11.10
9.94
8.50
6.97
12.10
8.57
7.24
6.04
45°C
17.40
13.90
11.00
9.83
15.60
12.80
10.90
8.87
12.00
10.80
9.25
7.58
13.20
9.32
7.87
6.57
55°C
270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com
1/2009
Power Inductors
SERIES
High Current Toroidal Inductors
For frequencies ≤ 10 kHz
(mW/cm
Core loss = 1.47 x 10
For frequencies ≥ 10 kHz
(mW/cm
Core loss = 9.07 x 10
Bpk =
A:
T37 = 0.064 cm
T50 = 0.112 cm
3
) Hz Gauss
3
) Hz Gauss
Erms 10
4.44 Anf
2
2
HCT
–8
–10
8
; T44 = 0.099 cm2;
; T68 = 0.179 cm
f
f
0.971 B2.11
1.26 B2.11
2
HCTR
This information is
intended to be used in
assisting the designer in
part selection. Each
application may contain
other variables which
must be considered in
part selection, such as
temperature effects,
waveform distortion, etc.
API Delevan
Sales/Engineering is
available to provide
information as needed to
fit each application.
Data is representative of
a DC current with less
than 1% ripple and an
AC waveform less than:
50 gauss on the
HCT-37X, 25 gauss on
the HCT-44X, 15 gauss
on the HCT-50X and 10
gauss on the
HCT-68X.The effect of
AC or ripple flux can be
significant in many DC
inductor applications.
When significantly
greater AC flux density is
present, it becomes
necessary to consider its
effect on both core loss
and permeability
(inductance).
All data points, on the
above graphs, that
exceed the rated DC
current specified for a
55°C rise from a 25°C
ambient are for design
reference only and are
not intended to imply
continuous use at those
DC current levels.
270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com
1/2009
Loading...