FFAT SERIES
Flexible Ferrite Absorbent Tubing
Cable Reference Table
Cable O.D.
Jacket
RG-8A/U 0.405
RG-9B/U 0.420
RG-55 0.176
RG-58 0.150
RG-58A 0.195
RG-59 0.191
RG-62 0.191
RG-62A 0.242
RG-71 0.208
RG-140 0.176
RG-141 0.146
RG-141A 0.190
RG-142 0.171
RG-174 0.080
RG-178 0.054
RG-179 0.084
RG-179B/U 0.100
RG-180 0.124
RG-187 0.084
RG-187A/U 0.110
RG-188 0.081
RG-188A/U 0.110
RG-195 0.124
RG-196 0.054
RG-210/U 0.242
RG-213/U 0.405
RG-214/U 0.425
RG-223 0.176
RG-303 0.146
RG-316 0.081
RG-316 DS 0.102
Information compliments of
MegaPhase, 201-D North
First Street, Stroudsburg PA
18360
Physical Parameters – Sizes available
Part Number FFAT-32 FFAT-54 FFAT-65 FFAT-96 FFAT-117 FFAT-1410
Outside Diameter Inches 0.116 0.196 0.255 0.354 0.43 .55
Millimeters 2.9 5 6.5 9 11 14
Inside Diameter Inches 0.072 0.157 0.196 0.236 0.275 .393
Millimeters 1.8 4 5 6 7 10
For more detailed graphs, contact factory
TABLE 1: Typical Impedance (Ohms) vs. Frequency Sample piece tested 4.0" long
10 MHz 30 MHz 50 MHz 100 MHz 200 MHz 300 MHz
FFAT-32
FFAT-54 11 34 58 138 583 1004
FFAT-65 11 34 58 132 587 1023
FFAT-96 11 35 59 134 619 921
FFAT-117 12 35 60 137 656 874
FFAT-1410 12 31 64 149 790 570
eatures
F
Provides effective EMI Suppression in a wide
•
Frequency Range (10MHz to 3GHz)
• High electrical resistance (10
• Easy and fast to process
• Extremely flexible
• Six sizes to choose from
• Can be incorporated into the over-molding process
on cable assemblies
• Eliminates the task of soldering braid
• Effectively eliminates EMI and RFI problems on
internal and external power, data and signal lines
Manufactured length 39.37 inches ± 0.50; 1 meter
± 12.7 mm
Operating Temperature Range –55°C to +125°C
*Note – Impedance Testing Impedance is typical,
based on (10.0") 19 AWG wire, measurement using
HP4191A.
11 34 58 140 579 980
6
to 108)
Suppressors
270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com
1/2009
Loading...