How it Works
APG
Loading...
MPI-R
Specifications
12 pgs1.27 Mb0

APG MPI-E, MPI-R Specifications

Download
Page 1
APG
Intrinsically Safe Magnetostrictive Level Sensors Series: MPI
®
C
US
variety of liquid level measurement applications. The MPI-R’s large, buoyant, and robust oat allows for use in harsh applications
where fouling or buildup might otherwise be of concern. The MPI-E’s lighter weight design allows it to be used in applications where space is limited. The MPI-E Chemical has a chemical resistant coating, allowing for use in corrosive, acidic, or marine envi-
ronments. The MPI-F’s exible stainless steel stem allows for installation in tall tanks without needing a crane, and the MPI-T’s 1”
titanium stem provides compatibility in a wider range of corrosive media--including H2S--in larger tanks.
Features
• Class I, Division 1, and Class I, Zone 0 Hazardous Location Rating (cCSAus, ATEX, IECEx)
• Highly accurate and repeatable readings
• RS-485 (Modbus RTU) output
• Rugged and reliable, lengths up to 25 feet (7.62 m)
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
• Dual level (interface) measurement
• Tank volume or level output, strapping table
• Pairs with MDI display for self-contained, intrinsically safe, level measurement and display system
Rev. A, 12/26/2019
Page 2
APG
MPI-E Specications
2.0”
50.8 mm
1.38”
35.05 mm
1.87”
47.50 mm
Floats A, B
2.06”
52.32 mm
Floats C, D
1.63”
41.40 mm
Float E
MPI-E Floats
Float F
2.20”
55.88 mm
37.34 mm
Float G
1.91”
48.42 mm
47.63 mm
1.47”
1.88”
Small Housing Large Housing
6.53 - 6.65”
165.9 - 169 mm
4.92”
125 mm
4.25”
108 mm
3.74”
95 mm
0.27” (x2)
7 mm
3/4” NPT Housing
Connecon Locaon
7.32 - 7.44”
185.9 - 189 mm
5.71”
145 mm
5.00”
127 mm
0.27” (x2)
7 mm
4.21”
107 mm
3/4” NPT
Housing
Connecon Locaon
1.78”
45.21 mm
Performance
• Resolution: 0.04 in. (1mm)
• Accuracy: ±0.05% of full scale
Programming
• Optional RST-6001 USB to RS-485 converter
Environmental
• Operating Temperature: -40º - 185ºF (-40º - 85ºC)
• NEMA 4X, IP65
Physical
• Housing: Cast aluminium, epoxy coated
• Stem: 0.5” ø 316L SS
• Stem Length: 1 - 12.75 ft. (0.3 - 3.9 m)
Electrical
• Electrical Connection: Terminal Block, 8-24 VDC
• Typical current draw: 24 mA
• Reverse polarity protection
• Surge protection (IEC 61000-4-5, 4-6, 4-7)
Connectivity
• Output:
Modbus RTU (RS-485) with Surge Protection
Certication
• NEMA 4X, IP65
• cCSAus Certicate CSA19CA70219727:
Ambient: -40º to 85ºC Class I, Division 1, Groups C, D, T4; Class I, Zone 0, AEx ia, IIB, T4, Ga Ex ia IIB, T4, Ga
• ATEX Certicate Sira 19ATEX2072X: II 1G Ex ia IIB T4 Ga Ta = -40º to 85ºC
• IECEx Certciate IECEx SIR 19.0026X: Ex ia IIB T4 Ga Ta = -40º to 85ºC
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
2
Rev. A, 12/26/2019
Page 3
APG
Model Conguration Options
Model Number: MPI - _E_ __5__ _____ - _____ _____ - _____ _____ _____ _____ - _____ - _____ - _____
A B C D E F G H I J K L
A. Stem Type
□ E 0.5 in. diameter 316L SS
B. Output
□ 5 Modbus RTU, with surge protection, Intrinsically Safe
C. Housing Type
All Housing Die-cast Aluminum, NEMA 4X, IP68, Blue
□ __ Large Housing
▲
□ A
Small Housing
□ B Large Housing with window □ C Small Housing with window
D. Float 1 (Top Float)
□ A 316L SS Round (0.65 SG) □ B 316L SS Round (0.92 SG) □ C 316L SS Cylindrical (0.65 SG) □ D 316L SS Cylindrical (0.92 SG) □ E Buna-N (0.5 SG) □ F 316 SS 3A Cylindrical (0.5 SG) □ G Kynar Cylindrical (0.66 SG)
E. Float 2 (optional)
□ N None □ B 316L SS Round (0.92 SG)† □ D 316L SS Cylindrical (0.92 SG)††
G. Mounting Size
□ __ See Mounting Type for available sizes
H. Mounting Connection
□ W Welded (xed) □ S Slide with Compression Fitting (adjustable)
I. Stem Finish Material
□ B 316L SS
J. Total Stem Length in Inches
□ __ Min. 12 in. - Max. 153 in.
K. Temperature Sensor Options
▲
□ N
None
□ 1D Digital Temperature Sensor A, 12 in. from bottom of
probe
□ 2D Digital Temperature Sensors A, B □ 3D Digital Temperature Sensors A, B, C □ 4D Digital Temperature Sensors A, B, C, D □ 5D Digital Temperature Sensors A, B, C, D, E □ 6D Digital Temperature Sensors A, B, C, D, E, F □ 7D Digital Temperature Sensors A, B, C, D, E, F, G
Note: Temperature sensors B - G are spaced evenly between A
and the probe’s zero reference, with a minimum of 2 in.
required between temperature sensors.
F. Mounting Type
□ F Flat Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ R Raised Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ S Tri Clamp
(Sizes: 2, 2.5, 3)
□ P NPT Plug 150#
(Sizes: 1.5, 2, 2.5, 3, 4)
□ N None
Note: ▲This option is standard.
Note: †Must be used with Top Float A.
Note: ††Must be used with Top Float C.
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
L. Housing Connection
▲
□ N
None
□ A 3/4” to 1/2” NPT Reducing Threads (Large Housing Only) □ B Cable Gland (Cable sold separately) □ M 4-pin M12 Micro Connector Male □ F 4-pin M12 Micro Connector Female
MPI Accessories
Please order separately, by part number.
Description Part Number
Programming Module
RST-6001 (Modbus) 125734
*sold with 6 ft USB cable
3
Rev. A, 12/26/2019
Page 4
APG
MPI-E Chemical Specications
Small Housing Large Housing
MPI-E Chemical Float
Float G
1.91”
48.42 mm
1.88”
47.63 mm
3/4” NPT
6.34”
161.1 mm
4.92”
125 mm
4.25”
108 mm
3.74”
95 mm
0.27” (x2)
7 mm
3/4” NPT Housing
Connecon Locaon
3/4” NPT
7.13”
181.1 mm
5.71”
145 mm
5.00”
127 mm
3/4” NPT Housing
Connecon Locaon
0.27” (x2)
7 mm
4.21”
107 mm
Performance
• Resolution: 0.04 in. (1mm)
• Accuracy: ±0.05% of full scale
Programming
• Optional RST-6001 USB to RS-485 converter
Environmental
• Operating Temperature: -40º - 185ºF (-40º - 85ºC)
• Maximum Operating Pressure: 30 PSIA @ 70°F / 21°C
• NEMA 4X, IP65
Physical
• Housing: Cast aluminium, epoxy coated
• Stem: 0.5” ø 316L SS with chemical resistant coating
• Stem Length: 1 - 12.75 ft. (0.3 - 3.9 m)
• Float: 1-7/8” Ø Kynar, 0.66 SG
Electrical
• Electrical Connection: Terminal Block, 8-24 VDC
• Typical current draw: 24 mA
• Reverse polarity protection
• Surge protection (IEC 61000-4-5, 4-6, 4-7)
Connectivity
• Output:
Modbus RTU (RS-485) with Surge Protection
Certication
• NEMA 4X, IP65
• cCSAus Certicate CSA19CA70219727:
Ambient: -40º to 85ºC Class I, Division 1, Groups C, D, T4; Class I, Zone 0, AEx ia, IIB, T4, Ga Ex ia IIB, T4, Ga
• ATEX Certicate Sira 19ATEX2072X: II 1G Ex ia IIB T4 Ga Ta = -40º to 85ºC
• IECEx Certciate IECEx SIR 19.0026X: Ex ia IIB T4 Ga Ta = -40º to 85ºC
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
4
Rev. A, 12/26/2019
Page 5
APG
Model Conguration Options
Model Number: MPI - _E_ __5__ _____ - __G__ __N__ - __P__ __2__ __W__ _____ - _____ - __4__ - _____ A B C D E F G H I J K L
A. Stem Type
□ E 0.5 in. diameter 316L SS
B. Output
□ 5 Modbus RTU, with surge protection, Intrinsically Safe
C. Housing Type
All Housing Die-cast Aluminum, NEMA 4X, IP68, Blue
□ __ Large Housing
▲
□ A
Small Housing
□ B Large Housing with window □ C Small Housing with window
D. Float 1
□ G Kynar Cylindrical (0.66 SG)
E. Float 2
□ N None
F. Mounting Type
□ P NPT Plug 150#
G. Mounting Size
□ 2 Size 2
H. Mounting Connection
□ W Welded (xed)
I. Stem Finish Material
□ F Kynar Coating □ G Abcite Coating
J. Total Stem Length in Inches
□ __ Min. 12 in. - Max. 153 in.
K. Temperature Sensor Options
▲
□ N
None
□ 1D Digital Temperature Sensor A, 12 in. from bottom of
probe
□ 2D Digital Temperature Sensors A, B □ 3D Digital Temperature Sensors A, B, C □ 4D Digital Temperature Sensors A, B, C, D □ 5D Digital Temperature Sensors A, B, C, D, E □ 6D Digital Temperature Sensors A, B, C, D, E, F □ 7D Digital Temperature Sensors A, B, C, D, E, F, G
Note: Temperature sensors B - G are spaced evenly between A
and the probe’s zero reference, with a minimum of 2 in.
required between temperature sensors.
Note: ▲This option is standard.
L. Housing Connection
▲
□ N
None
□ A 3/4” to 1/2” NPT Reducing Threads (Large Housing Only) □ B Cable Gland (Cable sold separately) □ M 4-pin M12 Micro Connector Male □ F 4-pin M12 Micro Connector Female
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
5
Rev. A, 12/26/2019
Page 6
APG
MPI-R Specications
MPI-R Floats
Floats Y, Z
3.065”
77.85 mm
Floats U, V
3.03”
76.96 mm
5.71”
145 mm
5.00”
127 mm
5.5”
139.7 mm
Floats W, X
4.76”
120.9 mm
Floats L, M
5.5”
139.7 mm
5.0”
127 mm
2.000”
50.8 mm
5.88”
150 mm
Floats S, T
2.80”
71.12 mm
Floats I, J
4.98”
126.5 mm
3.08”
78.23 mm
3.00”
76.2 mm
0.27” (x2)
7 mm
4.21”
107 mm
3/4” NPT
Housing
Connecon Locaon
6.84 - 6.97”
173.8 - 177 mm
Performance
• Resolution: 0.04 in. (1mm)
• Accuracy: ±0.05% of full scale
Programming
• Optional RST-6001 USB to RS-485 converter
Environmental
• Operating Temperature: -40º - 185ºF (-40º - 85ºC)
• NEMA 4X, IP65
Physical
• Housing: Cast aluminium, epoxy coated
• Stem: 1.0” ø 316L SS
• Stem Length: 4 - 25 ft. (1.22 - 7.62 m)
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
Electrical
• Electrical Connection: Terminal Block, 8-24 VDC
• Typical current draw: 25 mA
• Reverse polarity protection
• Surge protection (IEC 61000-4-5, 4-6, 4-7)
Connectivity
• Output:
Modbus RTU (RS-485) with Surge Protection
Certication
• NEMA 4X, IP65
• cCSAus Certicate CSA19CA70219727:
Ambient: -40º to 85ºC Class I, Division 1, Groups C, D, T4; Class I, Zone 0, AEx ia, IIB, T4, Ga Ex ia IIB, T4, Ga
• ATEX Certicate Sira 19ATEX2072X: II 1G Ex ia IIB T4 Ga Ta = -40º to 85ºC
• IECEx Certciate IECEx SIR 19.0026X: Ex ia IIB T4 Ga Ta = -40º to 85ºC
6
Rev. A, 12/26/2019
Page 7
APG
Model Conguration Options
Model Number: MPI - _R_ __5__ _____ - _____ _____ - _____ _____ _____ __B__ - _____ - _____ - _____ A B C D E F G H I J K L
A. Stem Type
□ R 1 in. diameter 316L SS
B. Output
□ 5 Modbus RTU, with surge protection, Intrinsically Safe
C. Housing Type
All Housing Die-cast Aluminum, NEMA 4X, IP68, Blue
▲
□ __
Large Housing
□ B Large Housing with window
D. Float 1 (Top Float)
□ Z 5.5h x 3d in. Red Polyurethane (0.65 SG) □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ X 5 in. Round 316L SS (0.52 SG) □ W 5 in. Round 316L SS (0.92 SG) □ V 6h x 3d in. Oval 316L SS (0.58 SG) □ U 6h x 3d in. Oval 316L SS (0.94 SG) □ T 3 in. Round 316L SS (0.60 SG) □ S 3 in. Round 316L SS (0.94 SG) □ M 5.5h x 2d in. Red Polyurethane (0.57 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ J 5h x 3d in. Oval Titanium (0.60 SG) □ I 5h x 3d in. Oval Titanium (0.94 SG) □ N None
E. Float 2 (optional)
□ N None □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ W 5 in. Round 316L SS (0.92 SG) □ U 6h x 3d in. Oval 316L SS (0.94 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ I 5h x 3d in. Oval Titanium (0.94 SG)
F. Mounting Type
□ F Flat Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ R Raised Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ S Tri Clamp
(Sizes: 2, 2.5, 3)
□ P NPT Plug 150#
(Sizes: 2, 2.5, 3, 4)
□ N None
G. Mounting Size
□ __ See Mounting Type for available sizes
H. Mounting Connection
□ W Welded (xed) □ S Slide with Compression Fitting (adjustable)
I. Stem Finish Material
□ B 316L SS
J. Total Stem Length in Inches
□ __ Min. 48 in. - Max. 300 in.
K. Temperature Sensor Options
□ N None
▲
□ 1D
Digital Temperature Sensor A, 12 in. from bottom of
probe
□ 2D Digital Temperature Sensors A, B □ 3D Digital Temperature Sensors A, B, C □ 4D Digital Temperature Sensors A, B, C, D □ 5D Digital Temperature Sensors A, B, C, D, E □ 6D Digital Temperature Sensors A, B, C, D, E, F □ 7D Digital Temperature Sensors A, B, C, D, E, F, G
Note: ▲This option is standard.
Note: Temperature sensors B - G are spaced evenly between A
and the probe’s zero reference, with a minimum of 2 in.
required between temperature sensors.
L. Housing Connection
▲
□ N
None
□ A 3/4” to 1/2” NPT Reducing Threads □ B Cable Gland (Cable sold separately) □ M 4-pin M12 Micro Connector Male □ F 4-pin M12 Micro Connector Female
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
7
Rev. A, 12/26/2019
Page 8
APG
MPI-F Specications
Floats Y, Z
5.5”
139.7 mm
Floats W, X
4.76”
120.9 mm
Floats L, M
5.5”
139.7 mm
3.065”
77.85 mm
5.0”
127 mm
2.000”
50.8 mm
MPI-F Floats
Floats U, V
Floats S, T
71.12 mm
5.88”
150 mm
2.80”
Floats I, J
4.98”
126.5 mm
3.03”
76.96 mm
3.08”
78.23 mm
3.00”
76.2 mm
5.71”
145 mm
5.00”
127 mm
0.27” (x2)
7 mm
4.21”
107 mm
3/4” NPT
Housing
Connecon Locaon
6.84 - 6.97”
173.8 - 177 mm
Performance
• Resolution: Modbus: 0.04 in. (1mm)
• Accuracy: ±0.05% of full scale
Programming
• Optional RST-6001 USB to RS-485 converter
Environmental
• Operating Temperature: -40º - 185ºF (-40º - 85ºC)
• NEMA 4X, IP65
Physical
• Housing: Cast aluminium, epoxy coated
• Stem: 7/8” ø Flexible Tubing with Braid, 316L SS
• Stem Length: 10 - 25 ft. (3.05 - 7.62 m)
Electrical
• Electrical Connection: Terminal Block, 8-24 VDC
• Typical current draw: 25 mA
• Reverse polarity protection
• Surge protection (IEC 61000-4-5, 4-6, 4-7)
Connectivity
• Output:
Modbus RTU (RS-485) with Surge Protection
Certication
• NEMA 4X, IP65
• cCSAus Certicate CSA19CA70219727:
Ambient: -40º to 85ºC Class I, Division 1, Groups C, D, T4; Class I, Zone 0, AEx ia, IIB, T4, Ga Ex ia IIB, T4, Ga
• ATEX Certicate Sira 19ATEX2072X: II 1G Ex ia IIB T4 Ga Ta = -40º to 85ºC
• IECEx Certciate IECEx SIR 19.0026X: Ex ia IIB T4 Ga Ta = -40º to 85ºC
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
8
Rev. A, 12/26/2019
Page 9
APG
Model Conguration Options
Model Number: MPI - _F_ __5__ _____ - _____ _____ - _____ _____ _____ __B__ - _____ - _____ - _____ A B C D E F G H I J K L
A. Stem Type
□ F 7/8 in. diameter Flexible Tubing with Braid, 316L SS
G. Mounting Size
□ __ See Mounting Type for available sizes
B. Output
□ 5 Modbus RTU, with surge protection, Intrinsically Safe
C. Housing Type
All Housing Die-cast Aluminum, NEMA 4X, IP68, Blue
▲
□ __
Large Housing
□ B Large Housing with window
D. Float 1 (Top Float)
□ Z 5.5h x 3d in. Red Polyurethane (0.65 SG) □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ X 5 in. Round 316L SS (0.52 SG) □ W 5 in. Round 316L SS (0.92 SG) □ V 6h x 3d in. Oval 316L SS (0.58 SG) □ U 6h x 3d in. Oval 316L SS (0.94 SG) □ T 3 in. Round 316L SS (0.60 SG) □ S 3 in. Round 316L SS (0.94 SG) □ M 5.5h x 2d in. Red Polyurethane (0.57 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ J 5h x 3d in. Oval Titanium (0.60 SG) □ I 5h x 3d in. Oval Titanium (0.94 SG) □ N None
E. Float 2 (optional)
□ N None □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ W 5 in. Round 316L SS (0.92 SG) □ U 6h x 3d in. Oval 316L SS (0.94 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ I 5h x 3d in. Oval Titanium (0.94 SG)
F. Mounting Type
□ F Flat Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ R Raised Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ S Tri Clamp
(Sizes: 2, 2.5, 3)
□ P NPT Plug 150#
(Sizes: 2, 2.5, 3, 4)
□ N None
H. Mounting Connection
□ W Welded (xed) □ S Slide with Compression Fitting (adjustable)
I. Stem Finish Material
□ B 316L SS
J. Total Stem Length in Inches
□ __ Min. 120 in. - Max. 300 in.
K. Temperature Sensor Options
□ N None
▲
□ 1D
Digital Temperature Sensor A, 12 in. from bottom of
probe
□ 2D Digital Temperature Sensors A, B □ 3D Digital Temperature Sensors A, B, C □ 4D Digital Temperature Sensors A, B, C, D □ 5D Digital Temperature Sensors A, B, C, D, E □ 6D Digital Temperature Sensors A, B, C, D, E, F □ 7D Digital Temperature Sensors A, B, C, D, E, F, G
Note: Temperature sensors B - G are spaced evenly between A
and the probe’s zero reference, with a minimum of 2 in.
required between temperature sensors.
L. Housing Connection
▲
□ N
None
□ A 3/4” to 1/2” NPT Reducing Threads □ B Cable Gland (Cable sold separately) □ M 4-pin M12 Micro Connector Male □ F 4-pin M12 Micro Connector Female
Note: ▲This option is standard.
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
9
Rev. A, 12/26/2019
Page 10
APG
MPI-T Specications
MPI-T Floats
Floats Y, Z
5.5”
139.7 mm
Floats L, M
5.5”
139.7 mm
Floats I, J
4.98”
126.5 mm
3.065”
77.85 mm
2.000”
50.8 mm
3.00”
76.2 mm
5.71”
145 mm
5.00”
127 mm
0.27” (x2)
7 mm
4.21”
107 mm
3/4” NPT
Housing
Connecon Locaon
6.84 - 6.97”
173.8 - 177 mm
Performance
• Resolution: 0.04 in. (1mm)
• Accuracy: ±0.05% of full scale
Programming
• Optional RST-6001 USB to RS-485 converter
Environmental
• Operating Temperature: -40º - 185ºF (-40º - 85ºC)
• NEMA 4X, IP65
Physical
• Housing: Cast aluminium, epoxy coated
• Stem: 1.0” ø Titanium
• Stem Length: 4 - 25 ft. (1.22 - 7.62 m)
• Slide Mounting: 316L SS
• Compression Fitting: Aluminum
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
Electrical
• Electrical Connection: Terminal Block, 8-24 VDC
• Typical current draw: 25 mA
• Reverse polarity protection
• Surge protection (IEC 61000-4-5, 4-6, 4-7)
Connectivity
• Output:
Modbus RTU (RS-485) with Surge Protection
Certication
• NEMA 4X, IP65
• cCSAus Certicate CSA19CA70219727:
Ambient: -40º to 85ºC Class I, Division 1, Groups C, D, T4; Class I, Zone 0, AEx ia, IIB, T4, Ga Ex ia IIB, T4, Ga
• ATEX Certicate Sira 19ATEX2072X: II 1G Ex ia IIB T4 Ga Ta = -40º to 85ºC
• IECEx Certciate IECEx SIR 19.0026X: Ex ia IIB T4 Ga Ta = -40º to 85ºC
10
Rev. A, 12/26/2019
Page 11
APG
Model Conguration Options
Model Number: MPI - _T_ __5__ _____ - _____ _____ - _____ _____ _____ __C__ - _____ - _____ - _____
A B C D E F G H I J K L
A. Stem Type
□ T 1 in. diameter Titanium
B. Output
□ 5 Modbus RTU, with surge protection, Intrinsically Safe
C. Housing Type
All Housing Die-cast Aluminum, NEMA 4X, IP68, Blue
▲
□ __
Large Housing
□ B Large Housing with window
D. Float 1 (Top Float)
□ Z 5.5h x 3d in. Red Polyurethane (0.65 SG) □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ M 5.5h x 2d in. Red Polyurethane (0.57 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ J 5h x 3d in. Oval Titanium (0.60 SG) □ I 5h x 3d in. Oval Titanium (0.94 SG) □ N None
E. Float 2 (optional)
□ N None □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ I 5h x 3d in. Oval Titanium (0.94 SG)
F. Mounting Type
□ F Flat Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ R Raised Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ S Tri Clamp
(Sizes: 2, 2.5, 3)
□ P NPT Plug 150#
(Sizes: 2, 2.5, 3, 4)
□ N None
G. Mounting Size
□ __ See Mounting Type for available sizes
H. Mounting Connection
□ W Welded (xed) □ S Slide with Compression Fitting (adjustable)
I. Stem Finish Material
□ C Titanium
J. Total Stem Length in Inches
□ __ Min. 48 in. - Max. 300 in.
K. Temperature Sensor Options
□ N None
▲
□ 1D
Digital Temperature Sensor A, 12 in. from bottom of
probe
□ 2D Digital Temperature Sensors A, B □ 3D Digital Temperature Sensors A, B, C □ 4D Digital Temperature Sensors A, B, C, D □ 5D Digital Temperature Sensors A, B, C, D, E □ 6D Digital Temperature Sensors A, B, C, D, E, F □ 7D Digital Temperature Sensors A, B, C, D, E, F, G
Note: Temperature sensors B - G are spaced evenly between A
and the probe’s zero reference, with a minimum of 2 in.
required between temperature sensors.
L. Housing Connection
▲
□ N
None
□ A 3/4” to 1/2” NPT Reducing Threads □ B Cable Gland (Cable sold separately) □ M 4-pin M12 Micro Connector Male □ F 4-pin M12 Micro Connector Female
Note: ▲This option is standard.
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
11
Rev. A, 12/26/2019
Page 12
APG
Tank Cloud
Put Your Tanks In The Cloud
Remote Sensors
Connect to any 4-20mA signal or APG Modbus sensor for constant access to your data. Access up to 10 sensors on a single connection.
Use the Internet Backbone
Connect the APG sensor or module to the Internet via landline, radio, cellular, or satellite.
View Secure Data 24/7
Access sensor data online through our secure portal at levelandflow.com. If the Internet is accessible, so is your information.
Stay Up-To-Date
Program custom alarms - receive email and text (sms) message alerts on your computer, mobile phone, or tablet.
®
EMAIL
TEXT
WEB
The Line-Up:
Online Data Portal
The Tank Cloud data portal, located online at www.levelandflow.com, displays everything you need to know about your measurement.
Here you can:
• View your current and past readings,
• Manage alarms,
• Configure your sensors,
• and Setup user permissions for others in your organization.
Measurements are sorted by location and grouped into sites. Simply select the site you would like to view, and then choose the sensor. Current readings are prominent in the center of the screen.
Contact us today at 888-525-7300 to set-up a demonstration of our sensors and online software. We are excited to show you how it can impact your business.
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
Document #9005621; Part #200335 Rev. A, 12/26/2019
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use