APG L14-C datasheet

PT-L9-L13-L14

Flexible by Design

Our millivolt output transducers are the economical answer for all general purpose measurements
where a cost-effective, high reliability unit is required. The PT-L9/L13/L14 pressure transducers
offer ranges from vacuum to 10,000 psi, single piece stainless steel construction, and a
tamper-resistant body design.

Features

• Cost effective

• Optional extended temperature compensation

• Stainless steel process tting and sensor

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]

PT-L9/L13/L14 Specications

Performance

•

Accuracy

B.F.S.L. ≤ 0.25% of full scale
NIST up to ±0.1% available select ranges

• Temp Compensation Range: (Standard)

Up to 0º - 130ºF (-17º - 54ºC)

• Extended Temp Compensation Range: (Optional)

Up to -40º - 250ºF (-40º - 121ºC)

• Zero balance adjust: ±2% of full scale

Connectivity

• Output:
L9: 10 mV/V ±2%
L13: 3 mV/V ±2%
L14: 5 mV/V ±2%

Environmental

• Operating Temperature:

-40º - 180ºF (-40º - 82ºC)

Electrical

• Input Impedance:

1200 minimum

• Output Impedance:

Approx. 1000 Ω

Physical

• Material: 15-5 or 316L SS

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]
2 7/31/2013

Options

PT- ____ - C - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____ - ____
A B C D E F G H I J K

A. Operation

□ L9 10 mV/V output
□ L13 3 mV/V output
□ L14 5 mV/V output

B. Common Pressure Ranges

□ 5 □ 50 □ 500 □ 5000

□ 15 □ 100 □ 1000 □ 10000

□ 30 □ 300 □ 3000

*Other ranges available

C. Unit of Measure

▲

□ PSI

□ bar □ inH

□ kPa □ inHg

O □ kgcm2

2

□ mbar □ mmHg □ fsw

D. Pressure Type

□ G Gauge □ A Absolute
□ CG Compound Gauge □ S Sealed
□ V Vac

E. Electrical Connection

Mating connector sold separately

▲

□ E3

4-pin bayonet

□ E5 Pigtail with cable (2 ft. standard)

F. Elelectircal Cable Length

Use with E3 connection

▲

□ W0

Use with E5 pigtail connection

0 ft

□ W1 2 ft (0.6 m)
□ W2 5 ft (1.5 m)
□ W3 10 ft (3 m)
□ W4 25 ft (7.6 m)

G. Process Connection

▲

□ P0

1/4-18 NPTM □ P22 G3/8 (3/8 BSPP) male

□ P2 1 1/2 sanitary □ P23 G1/2 (1/2 BSPP) male
□ P5 1/4-18 NPTF □ P26 7/16-20 UNF male w/ cone
□ P7 7/16-20 SAE male □ P30 High Pressure Sno Trik
□ P16 PT 1/4 (BSPP) male (M-250C, Autoclave male)

H. Accuracy

▲

□ N0

±0.25%

□ N1 ±0.25% with NIST certication
□ N2 ±0.1% with NIST certication
□ N3 ±1% or better
□ N4 ±1% or better with NIST certication
□ N12 ±0.5% (standard on ranges greater than 5000

psi; voltage output only)

□ N13 ±0.5% with NIST certication

I. Materials

□ M0 15-5 SS

▲

□ M1

316L SS or 316L/Hastelloy

□ M5 Hastelloy (minimum quantities required)

J. Vibration

▲

□ V0

Standard

□ V1 High (requires K1 can assembly)

K. Temperature

▲

□ S0

Standard: 0º - 130ºF (-17º - 54ºC)

□ S1 Extended: -40º - 180ºF (-40º - 82ºC)
□ S2 Extended: -40º - 250ºF (-40º - 121ºC)

*Consult factory

Note: ▲Indicates this option is standard.

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]
3 7/31/2013

Accessories

Please order separately, by part number.

Description Part Number

4-pin bayonet mating connector (E3) 509010*

4-pin bayonet mating connector (E3) with cable 509010-00XX

*To order a 4-pin bayonet mating connector with cable, you will need to specify the cable length by adding “00XX”

to the part number (X=cable length).

- Specify cable: 2, 5, 10 or 25 ft

Example: 509010-0025 = 25 feet of cable

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]
4