ApexDesk AL4628 User Manual

Vortex Series 2-leg Desk Assembly Guide

For desk with underframe Model No. AL4628-XX

ELECTRIC HEIGHT-ADJUSTED SIT TO STAND DESK

REV-1509A

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS .................................................................................................... 3

CAUTION, USE & LIABILITY .......................................................................................................................... 4

PARTS & HARDWARE ..................................................................................................................................... 5

ASSEMBLY INSTRUCTIONS ........................................................................................................................ 6

CARE INSTRUCTIONS .................................................................................................................................. 11

TECHNICAL SPECIFICATIONS................................................................................................................. 11

WARRANTY INFORMATION ....................................................................................................................... 12

CONTACT INFORMATION .......................................................................................................................... 12

2 | P a g e

IMPORTANT SAFETY INSTRUCTIONS

WARNING –When using electric appliances, basic precautions should always be followed, including the
following:

a) Read all the instructions before using the appliance.
b) To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
c) Do not contact moving parts.
d) Only use attachments recommended or sold by the manufacturer.
e) Do not use outdoors.
f) To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
g) Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Unplug from outlet when not

in use and before servicing or cleaning

h) Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is

dropped or damaged in any manner. Return appliance to the nearest authorized service facility for
examination, repair, or electrical or mechanical adjustment.

i) Connect to a properly grounded outlet only. See grounding Instructions below.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having
an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and ordinances. This appliance is for
use on a nominal 120 V circuit, and has a grounding plug that looks like the plug illustrated in sketch A.
A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used to connect this
plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary
adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician. The
green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by
the metal screw.

3 | P a g e

CAUTION, USE & LIABILITY

Keep children away from electric sit to stand desks, control units and handsets.

Keep all electrical components away from liquids.

Do not sit or stand on desk. Do not crawl or lie under desk.

Do not place any objects taller than 20” underneath desk.

Do not open any of the components –lifting columns, control box, or controller. There is a risk of
electric shock.

CAUTION

Make sure no obstacles are in the desk’s path. Make sure the desk is not touching any walls. Make sure all cords

are of appropriate lengths to accommodate the change in desk height.

USE & LIABILITY

This sit to stand adjustable desk has electric motors and is designed for use in an indoor environment and dry
work areas only. The desk height is adjustable so that it can be positioned at the most suitable height. Any other
use is at user’s risk. Under no circumstances does the manufacturer accept warranty claims or liability claims for
damages caused from improper use or handling of the desk.

4 | P a g e