Apex 435 Data sheet

Type

Polar Pattern

Frequency Response

Sensitivity

Impedance

S/N Ratio

Max SPL

Equivalent Noise

Included Accessories

Dimensions

Weight

Distributed in Canada by

Yorkville Sound Ltd., 550 Granite Court, Pickering, Ontario L1W-3Y8

phone : [phone] fax : [phone]

www.apexelectronics.com

Wide Diaphragm Condenser

Cardioid

20 - 20000 Hz

14mv/Pa = -40dB (0dB = 1v/Pa) -40dB

<200 Ohms

76dB

(For 1% THD @ 1000Hz) 140dB

(IEC 268 - 4 - A weighted) 24dB

IMC-3 Shockmount

6 inches x 1.75 inches (152mm x 45mm)

13oz / 362 g

Specifications:

Distributed in U.S.A. by Yorkville Sound Inc., 4625 Witmer Industrial Estate Niagara Falls, New York, 14305

phone : [phone] fax : [phone]

Rugged construction, high SPL handling in a compact chassis makes the Apex435 an ideal choice for live sound reinforcement or live recording
applications. It is also an ideal choice as a utility microphone for home or project studios where performance is required, yet budget is a conscern.

The Apex435 uses the same proven capsule and electronics of the popular Apex430, however it is mounted in a ligher, more compact chassis. It can
easily be used as an overhead mic for drum kits, for guitar or bass cabinets or anywhere superior sound quality and high sound pressure handling is
required. The Apex435 is also the microphone of choice for saxophones, flutes, brass or woodwinds, acoustic guitars or acoustic bass where
subtlety and clarity is paramount.

In live sound applications and remote recording Apex435's cardioid pattern offers excellent feedback rejectionand better isolation and will give you
the best results on most vocal applications and a wide range of solo instruments including background brass and woodwinds, acoustic stringed
instruments (violin, viola and cello), drums and percussion. Note: The cardioid symbol on the microphone housing denotes the ‘live side’, or front

face of the microphone that in all cases should face the performer.

The Apex435 is a professional wide-diaphragm, cardioid condenser microphone with an internal -6dB 100Hz low frequency roll-off switch. To set the
cutoff switch, simply unscrew the bottom of the microphone housing, slide the microphone body off of the chassis and look for the simple blue switch
in the middle of the microphone circuit board. Depressing the switch engages the low frequency roll-off. In virtually all recording and live sound
applications, the low frequency roll-off should be engaged to reduce handling noise and low frequency ‘rumble’ at source.

The Apex435 microphone is made with a heavy-duty aircraft grade machined brass body with a durable, scratch resistant anodized finish and are
sold with a "cat's cradle" style shock mount.

Included Accessories:

 Apex IMC-3 Cats - cradle Shockmount

Suggested Accessories

 Apex MWS-56dlx 6-inch studio pop filter
 Apex 420WS Wind sock
 Apex APP2 Phantom Power Supply

Apex435 Wide Diaphragm Condenser Microphone