Aperio DEMO-KS100-S-IPS-B Installation Instructions
Page 1 of 12
For more information visit website assaabloyesh.com P/N: 3080006.017_1
Product Specifications
Wireless Frequency: 2.4GHz, IEEE 802.15.4, using AES 128-bit encryption
Lock Battery Type: AA Lithium, 1.5 Volts (V)
Battery Life: 50,000 cycles*
Holding Force: 400 lbs
FCC Part 15 Compliant, Industry Canada Compliant
Operating Temperature: 32 to 122 F (0 to 50 C)
HID® multiCLASS SE® technology Credentials Supported: High Frequency (13.56 MHz) – HID iCLASS,
HID iClass SE (SIO-enabled), HID iCLASS Seos, HID MIFARE SE, HID DESfire EV1 SE, MIFARE
CLASSIC DESfire EV1. Low Frequency (125KHz) – HID Prox, AWID, EM4102, ioProx. NFC Enabled
Mobile Phones.
AA Lithium Batteries
required. Use of other
types of batteries, such as
alkaline, will significantly
decrease battery life.
2x
*All battery life claims are approximate and based on a set
configuration profile. Battery performance is based on predefined system settings such as battery chemistry and battery
model used, credential presentation settings (LED/buzzer), UHF
polling period, UHF status intervals, and operations per
day. Actual battery performance will vary and depends on the
factors above.
HES KS100 Aperio
Wireless Cabinet Lock
Installation and Operating Instructions
Page 2 of 12
For more information visit website assaabloyesh.com P/N: 3080006.017_1
Recommended tools
Cutting Wheel
Phillips #2 Screwdriver
Hardware Specifications
Table 1 – Cam
DPS Cable Extension
Optional – The DPS signal is closed when the handle is resting in its locked position. The DPS circuit can be
extended to include normally open DPS switches arranged in a series to monitor additional doors and panels
CAM
CAM LENGTH
CAM
DEPTH
38mm - 4
(Standard)
38mm [1-1/2"]
26mm [1”]
38mm - 5
(Optional)
38mm [1-1/2”]
28mm
[1-1/10"]
45 mm - 1
(Optional)
45mm
[1-3/4”]
18mm
[7/10”]
For Technical Support Please call 1-800-810-WIRE
DPS Extension Cable
DPS
Switches
(SPST-NO):
As Needed
Optional
Switch #1
(SPST-NO):
Provided
Extending the DPS Circuit:
A: Remove the DPS jumper
B: Connect the included DPS extension
cable
C: Connect additional normally open
DPS switches as shown to monitor
additional panels.
Page 3 of 12
For more information visit website assaabloyesh.com P/N: 3080006.017_1
Package Contents
Lock Body
Battery Bracket
Handle Assembly
Handing Selectors
SFIC Cam and
Spacer
Cam
2x AA Lithium
Batteries
Screw A
#1/4-20 x .50
Truss Head
Phillips
3x Screw B
8/32 x 5/16”
Pan Head
Phillips
Optional External DPS Cable
Harness
3x Dolphin
Connector
Note: SFIC mechanical key
override/SFIC blank sold
separately.
Page 4 of 12
For more information visit website assaabloyesh.com P/N: 3080006.017_1
Installing the Lock
1. Locate the 150mm x 25mm lock cutout on the door. Connect battery cable and
optional DPS cable to lock body. Secure battery bracket to lockbody using 3x screw
B.
2. Ensure lock body is flush against the
mounting surface to depress tamper
switch.
3. Select appropriate handing selector.
Tamper
Switch
Door Edge
Note: ensure that the arrow on the
handing selector is pointing towards
the edge of the door.
DPS Cable
(optional)
Loading...