Aperio A100-3090HC-1-121, A100-3090HC-1-626, A100-3090HC-2-121, A100-3090HC-2-626, A100-3090HP-1-121 Specsheet
...
TRIM
A100-3090H
Keyless Entry Control
and Aperio® Hub
ELECTRIFIED
PRODUCT
The A100-3090H Keyless Entry Control and Aperio® Hub
provides maximum security and audit trail with either HID
Prox or iCLASS contactless card reader that can integrate
into existing access control systems.
Function
The A100-3090H is a keyless entry control for Adams Rite deadlocks,
deadlatches and exit devices, that is compatible with aluminum stile, steel and
wood door applications.
An authorized card presentation is confirmed with an audible beep and visual
change in the red/green LED indicator – displaying the locked/unlocked status. A
high-speed motor engages an internal clutch to enable the exterior lever handle
operation. Upon timeout, the lever operation is disabled until the next authorized
card presentation or by key override.
®
A100-3090H KEYLESS ENTRY CONTROL
AND APERIO® HUB
T-9
Features
• Aperio wireless technology
• Vandal resistant lever with break-away (resettable) clutch
• Key override via mortise cylinder (1 to 1 1/2" length with MS
cam, available separately)
• Surface mounted with concealed fasteners (1-3/4" to 2-1/4"
door thickness)
• Temperature range: -31°F to 151°F (-35°C to 65°C) and
5-95% humidity (non-condensing)
• Efficiant power usage; 4 x A A Alkaline, included; supports
60,000 activations.
• 50 ft. max. distance to wireless hub.
®
Specifications
WIRELESS ACCESS CONTROL
• Minimal field configuration for quick, easy wireless
deployments that eliminate the cost and inconvenience
of hardwiring the door
• Fully-encr ypted AES 128 bit wireless communication
between the A100 lock and Aperio hub ensures
data security
• The Aperio wireless hub connects to an access control
system with typical Wiegand wiring and additional REX,
DPS, tamper and low batter signal wires
• The Aperio hub should be mounted within 50’ of the desired
lock location and through two walls or less
HOUSING
• The sleek-looking A100-3090H measures 1-3/4" wide x
15-3/8" high, with Satin Chrome (626) and Powdercoat Dark
Bronze (121) finishes.
ARM-014-9/14
HANDLE
• Clutch-protected cast zinc alloy, finished to match housing;
field selectable handing.
COMPATIBLE LOCKING DEVICES
• The A100-3090H works with existing Adams Rite MS®
Deadlocks, 4500, 4700, 4900, Series Deadlatches and
8000 Series Exit Devices in 31/32" backsets and greater.
Additionally, the A100 -3090H is compatible with Yale 7200
Series and Corbin Russwin ED4000 Series exit devices
(check model number for availability).
ELECTRICAL SPECS
• Integrated HID® 125 KHz Prox contactless card reader
supporting HID® Prox 26-39 bit formats
• Integrated HID
• FCC Part 15 (USA and Canada) Compliant
OPTIONS AND ACCESSORIES
• DPS switch (DPS-C-38G), Mortise Cylinder.
STA N DARD PACK AGE
• Individually boxed with installation instruction, wireless hub
and mounting hardware for metal door applications from
1-3/4" to 2-1/4" thick. Shipping weight approximately 6 lbs.
®
13.56 MHz iCL ASS contactless card reader.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS+1890
4300
4510
4530
4900
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
FLUSHBOLTS
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
DIMENSIONS OF CAM TO OPERATE:
T-10
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
A100-3090H KEYLESS ENTRY CONTROL
AND APERIO® HUB
TRIM
DimensionsDimensions Stile Preparation
1-7/16"
36.5mm
1-3/4"
44.5mm
5"
127mm
7-19/32"
192.9mm
15-3/8"
390.5mm
3-7/8"
98.4mm
2"
50.8mm
1/2"
12.7mm
C
L
OF CYLINDER
PREP
ONE WALL ONLY
INSTALL RIVNUT
6-13/32"
162.7mm
11-15/16"
7/8"
22.2mm
4X
303.2mm
ø
1/4"
6.4mm
Installation
Hub
CYLINDER CAM
• Operable by any standard 1-5/32"
diameter mortise cylinder with MS®
.800" ± .005"
“Dim A”
20.3mm ± .127mm
.120"
R
3.0mm
.182"
4.6mm
HOW TO ORDER A100-3090H KEYLESS ENTRY CONTROL AND A PERIO
Specify quantity and the following information. Order related products separately.
PRODUCT NO. CREDENTIAL COMPATIBLE PRODUCTS FINISH
cam dimensioned as shown. Cylinders
with MS® cams can be readily obtained
from most cylinder manufacturers. See
CYLINDERS section for cylinder make,
thumbturn and trim ring information.
®
HUB
4-1/4"
10.8mm
A100-3090H -C -1 -626
P 125 kHz HID® Prox
C 13.56 MHz HID iCLASS 2 Adams Rite MS® deadlocks 626 Satin Chrome
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following
related products, available separately:
Accessories Cylinder Deadlocks Deadlatches Exit Devices
DPS-C-38G
DPS switch.
Key override for the eForce 3090
by any standard 1-5/32" diameter
mortise cylinder with MS® cam.
1 Adams R ite latches or 8000 Series E xit Devices, Yale 7200
series, C orbin Russwin ED4000 series exit devices only.
(select REX enabled version)
This product is compatible with the following products:
MS1850S(-050),
MS1850SN(-050)
MS1950(-050).
4500 Series Standard Duty Deadlatch.
4900 Series Heavy Duty Deadlatch.
121 To match 313 Dark Bronze Anodized
Adams Rite 8000 Series
Exit Devices in 31/32"
backset or greater.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
4-9/16"
115.9mm
1-23/32"
43.7mm
Loading...