APEM A1, A01, A02, A03 Industrial controls
APEM www.apem.com G-3
G
A1-A01-A02-A03 series
Industrial controls
Distinctive features
The A01 and A02 series offer ranges of :
- pushbutton switches, illuminated or not
- indicators
- 2 or 3 position keylock switches
- 2 or 3 position rotary lever switches
- emergency stop switches
with rectangular, square or round operators.
• Custom engraved aluminium pushbutton switches, A1 series
• Switch enclosures
• Pushbutton switches and indicators, A03 series
❑ Environmental protection : IP65
❑ Modular construction
❑ Electrical life : 50.000 cycles min.
❑ Screen engraving or insertable legends on request
❑ Approvals
UL 1054 BS RIA 20 Shock & Vibration
EN 61058-1 EN 61058-1
pending
A01 - A1 - A03 series
• Panel cut-out :
Ø 16 mm (.630), except :
- flush mount round : Ø 22 mm (.866)
- flush mount rectangular : 20.60 x 26.70 mm
- flush mount square : 20.60 x 20.60 mm
- A1 series : Ø 22 mm (.866)
- A03 series : round or square Ø 22 (.866)
flush mount : Ø 30 mm (1.378)
• 1, 2, 3 and 4 poles
• Solder lug/quick-connect terminals
• Contacts : silver, gold plated
• Current/voltage rating :
6A 250VAC max. - 10mA 5VAC min.
• Lamp : filament, neon or LED
A02 series
• Panel cut-out :
- round or square : Ø 22 mm (.866)
- rectangular : 29,5 x 21,5 mm (1.160x.846)
- flush mount : Ø 30 mm (1.378)
• 1 and 2 poles
• Screw terminals (optional : quick-connect term.)
• Contacts : silver
• Current/voltage rating : 12A 380VAC
16A 250VAC max. - 25mA 5VAC min.
• Lamp : filament, neon, LED
or special multi-LED array
Option : end cap terminal guard. Order separately
(see end of A02 series).
Each sub-assembly has
to be ordered separately.
Packaging unit :
A1 : 25 pieces - A01 : 20 pieces (except pushbuttons: 25 pieces) - A02 : 25 pieces - A03 : 10 pieces.
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
New!
G-4 APEM www.apem.com
A1-A01-A02-A03 series
Industrial controls
Specifications for pushbutton, keylock and rotary switches
G
ELECTRICAL SPECIFICATIONS
A01 - A1 - A03 A02
• Function :
Momentary Momentary
or maintained action or maintained action
• Current/voltage rating : 10mA 5VAC min. 25mA 5VAC min.
6A 250VAC max. - 6A 12VDC max.
12A 380VAC - 16A 250VAC max.
12A 12VDC max.
• Contact gap > 1 mm (.039)
Double break 2 x 1,5 mm (.059)
• Initial contact resistance : 10mΩ max. at 1A 4VDC 10mΩ max. at 1A 4VDC
• Insulation resistance : 50 MΩ min. 50 MΩ min.
• Dielectric strength : 750V between open contacts 2KV between open contacts
5KV live to accessible 4KV live to accessible
• Electrical life (resistive load) : 50.000 cycles 50.000 cycles
• Insulation :Class 2 Class 2
• Lamp life :
LED : 60.000 h min. to 75% relative LED : 60.000 h min. to 75 % relative
luminosity - Filament : approx. 5.000 h luminosity - Filament : approx. 5.000 h
Neon : approx. 10.000 h Neon : approx. 10.000 h
• Lamp circuit diagrams
GENERAL SPECIFICATIONS
A01 - A1 - A03 A02
• Min. mechanical life :
Pushb. momentary : 1 million cycles Pushb. momentary: 1 million cycles
Pushb. maintained : 100.000 cycles Pushb. maintained : 100.000 cycles
Keylock and rotary : 100.000 cycles Keylock and rotary : 100.000 cycles
• Panel thickness 8 mm (.315) max. 8 mm (.315) max.
• Operating temperature : -20°C to +55°C -20°C to +85°C
• Solder heat resistance : 350°C, 5 sec. 350°C, 5 sec.
(IEC 68-2-20Tb, method 2)
• Degree of environmental IP 65 front of panel IP 65 front of panel
protection (IEC 529 ) IP 40 back of panel IP 40 back of panel
• Lamps :Midget Grooved T1
3/4,Midget Grooved T13/4,
filament, LED or neon filament, LED or neon
Special multi-LED array
• Switch terminals :
Solder/quick-connect 2,8 mm (.110) M3 screws - wire 2 x 0,75 mm
2
max.
• Lamp terminals :
Solder/quick-connect 2,8 mm (.110) M3 screws
Flexible wire 2 x 2,5 mm2 max.
Rigid wire 4 mm2 max.
Specifications for emergency stop switches : see pages 10 and 22.
For screen engraving or film legends, contact APEM.
AB
AB
APEM www.apem.com G-5
G
A1 series
Engraved aluminium flush mounting pushbuttons and indicators
Panel cut-out Ø 22 (.866)
A pushbutton assembly requires :
engraved screen + lamp (if illuminated) + operator + switch block + flush mount bezel.
To order these elements, select desired model numbers from the table below.
Example : pushbutton, round, illuminated, sealed to IP65, latching, single pole with “start”
engraving, 24V blue LED and flush mounting bezel = A1PCA1X103K403.
01 - Front Fog Lights
02 - Rear Fog Lights
03 - ‘Start’
04 - Interior Light
05 - Boot Release
06 - Hazard Warning
07 - Lights
08 - Heating & Ventilation
09 - Map Lights
10 - Side Lights
11 - ‘Lock’
12 - ‘Unlock’
13 - Rear Window Heating
14 - Cooling
15 - Wipers
16 - Washers
17 - Fan
18 - Horn
19 - Air recirculation
20 - Blank
Engraved Screen Options
A1
Switch Type
P - pushbutton
I - indicator
Accessories
03 - flushmount
Bezel
C - round
Illumination
A - illuminated
B - non-illum.
Sealing
0 - unsealed
1 - sealed IP65
Function
0 - indicator
X - latching
Y - momentary
Switch block
0 - indicator
1 - single pole
2 - double pole
5 - three pole
3 - four pole
Bulb
A1 - filament 6.3V
B1 - filament 14V
C1 - filament 28V
D1 - filament 36V
E1 - filament 48V
F1 - filament 60V
G1 - Neon 110V
H1 - Neon 220V
I1 - Led 6V red
I2 - Led 6V green
I3 - Led 6V amber
J1 - Led 12V red
J2 - Led 12V green
J3 - Led 12V amber
J4 - Led 12V blue
J5 - Led 12V white
K1 - Led 24V red
K2 - Led 24V green
K3 - Led 24V amber
K4 - Led 24V blue
K5 - Led 24V white
L1 - Led 48V red
L2 - Led 48V green
L3 - Led 48V amber
OTHER SCREEN ENGRAVING OPTIONS :
contact APEM.
Ø25.00
(9.85 DIA)
42.05
(1.655)
14.5
(.571)
8.5
(.335)
18.00
(.709)
2.8
(.110)
18.00
(.709)
1
12.00
(.472)
0.5
(.020)
15.3
(.602)
3
2
7.65
(.301)
G-6 APEM www.apem.com
A01 series
Illuminated or non-illuminated pushbutton switches
Panel cut-out Ø 16 (.630)
G
)456.1( )493.(
(.020)
(.709)
(.110)
(.709)
)103.(
)549.(
)QS 907.()AID 907.(
(.709)
(.236)
(.472)
)533.(
00.0100.24
56.
7
05.8
00.81x00.8100.42Ø00.81
12.00
6.00
18.00
0.50
18.00
2.80
18.00
)033.(
04.
8
(1.209)
)2
2
1.1(
(.945)
(.236)
05
.
8
2
6.00
24.00
30.70
12 3
321
3
2
1
12 3
321
12 3
CD EFC D
)103.(
56.
7
)103.(
56.
7
(.236)
6.00
)907.(
00.81
16.25
(.640)
9.00
(.354)
9.00
(.354)
A pushbutton assembly requires :
screen + lamp (if illuminated) + operator + switch block.
To order these elements, select desired model numbers from tables below.
Example : IP65 rectangular pushbutton, single pole, maintained, red screen and 12V red LED =
A0161B, A0142M1, A0101X and A0151BUL.
Screen Lamp Operator Switch block
SCREEN ENGRAVING/INSERTABLE LEGENDS : contact APEM
Bezel: rectangular, square, round, ‘Illum’ - illuminated, ‘Non-illum’ - non illuminated
❶
❷
❸❹
UNSEALED SWITCHES (IP40) :
add “01” to end of operator
model number.
BI-COLOUR LED’s optional.
Bezel Colour Part No
black A0161A
red A0161B
amber A0161C
yellow A0161D
green A0161E
blue A0161F
clear A0161G
white A0161J
black A0162A
red A0162B
amber A0162C
yellow A0162D
green A0162E
blue A0162F
clear A0162G
white A0162J
black A0163A
red A0163B
amber A0163C
yellow A0163D
green A0163E
blue A0163F
clear A0163G
white A0163J
Pole Bezel Description Part No
1 or 2 Illum, momentary A0101Y
1 or 2 Illum, maintained A0101X
1 or 2 Non-illum, momentary A0102Y
1 or 2 Non-illum, maintained A0102X
3 or 4 Illum, momentary A0103Y
3 or 4 Illum, maintained A0103X
3 or 4 Non-illum, momentary A0104Y
3 or 4 Non-illum, maintained A0104X
1 or 2 Illum, momentary A0105Y
1 or 2 Illum, maintained A0105X
1 or 2 Non-illum, momentary A0106Y
1 or 2 Non-illum, maintained A0106X
3 or 4 Illum, momentary A0107Y
3 or 4 Illum, maintained A0107X
3 or 4 Non-illum, momentary A0108Y
3 or 4 Non-illum, maintained A0108X
1 or 2 Illum, momentary A0109Y
1 or 2 Illum, maintained A0109X
1 or 2 Non-illum, momentary A0110Y
1 or 2 Non-illum, maintained A0110X
3 or 4 Illum, momentary A0111Y
3 or 4 Illum, maintained A0111X
3 or 4 Non-illum, momentary A0112Y
3 or 4 Non-illum, maintained A0112X
Lamp Voltage Part No
Filament 6.3V A0141A
Filament 14V A0141B
Filament 28V A0141C
Filament 36V A0141D
Filament 48V A0141E
Filament 60V A0141F
Neon 110V A0143G
Neon 220V A0143H
LED 6V red A0142L1
LED 6V green A0142L2
LED 6V amber A0142L3
LED 12V red A0142M1
LED 12V green A0142M2
LED 12V amber A0142M3
LED 12V blue A0142M4
LED 12V white A0142M5
LED 24V red A0142N1
LED 24V green A0142N2
LED 24V amber A0142N3
LED 24V blue A0142N4
ED 24V white A0142N5
LED 48V red A0142P1
LED 48V green A0142P2
LED 48V amber A0142P3
No of poles Part No
Single pole A0151BUL
Double pole A0152BUL
Three pole A0155BUL
Four pole A0153BUL
3
1
2
Loading...