Page 1
Installation 990-6488A Release date: 9/2021
pdu1082a
NetworkUSB
Warning
OK
Overload
Console
NetSheltr
9000 Series
R
10/
100
/
1000
1.1 to 1.4 N•m
(10 to 12 in-lb)
pdu1082b
NetworkUSB
Warning
OK
Overload
Console
NetSheltr
9000 Series
R
10
/
100/
1000
1.1 to 1.4 N•m
(10 to 12 in-lb)
Rack Power Distribution Unit (PDU) Display Module
with NMC3 (0J-0N-2079/0J-0N-1713 and 0J-0N-96967/
0J-0N-2442)
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Before working on the Rack PDU, turn off all power supplying the Rack PDU and disconnect the power cable. Only
trained personnel familiar with the construction and operation of the Rack PDU and the electrical hazards involved
may make repairs to the Rack PDU.
Failure to follow these instructions will result in death or serious injury.
CAUTION
ELECTROSTATIC SENSITIVE COMPONENTS
Use appropriate electrostatic discharge precautions (for example, wrist strap and ground cord) while performing
repairs and when handling the display module.
Failure to follow these instructions can result in injury or equipment damage.
You will need a T10 Torx Screwdriver (not provided).
0J-0N-2079/0J-0N-1713
for models APDU9966, APDU9967
0J-0N-96967/0J-0N-2442
for all other APDU9XXX models
APC by Schneider Electric
70 Mechanic Street
02035 Foxboro, MA
USA
As standards, specifications, and design change
from time to time, please ask for confirmation of
the information given in this publication.
© 2021 – APC by Schneider Electric. All rights
reserved.
www.apc.com
Loading...